Rod Tubes and Sleeves

Spend less time untangling outfits and more time getting ready to fish. The Stick Jacket Casting slips over your casting rod and guides to help protect against scratches and keep line from catching on neighboring rods during storage and transport. Its finger-trap-style fit holds the sleeve in place until you are ready to remove it.

Sized for rods up to 7 ft 6 in long and 3-7/8 in around, it is a practical cover for appropriately sized freshwater and inshore casting setups. With 19 color and pattern options, you can give each outfit its own visual identity instead of sorting through a bundle of similar-looking rods at the ramp.

Keep Guides Covered and Setups Separate

Loose rods can rub together, and exposed guides can catch line from other outfits. This sleeve adds a protective layer around the rod and guides while keeping everyday handling simple. It slides on and off without enclosing the reel, and usually stops short of the hook keeper so a safely secured lure can remain outside the cover.

A sleeve helps with routine organization and surface protection; it is not a rigid travel case. Use structural protection when rods may be crushed or exposed to heavy impacts.

The Right Pick for Your Casting Rod

Best for: organizing bass casting outfits, separating jig, worm, crankbait, or other technique-specific setups, and covering inshore casting rods that fit the stated dimensions. Choose by rod length and guide clearance rather than by species alone. Remove the cover before fishing.

For longer casting rods up to 8 ft 6 in with the same 3-7/8 in-around fit, choose the Stick Jacket XL Casting. If your rod and guides need more room, compare the Stick Jacket Big Magnum, sized for rods up to 8 ft 6 in long and 8-1/2 in around.

Simple Details That Make Packing Easier

• Easy-on, easy-off sleeve covers the rod blank and guides.
• Finger-trap-style fit helps hold the sleeve on the rod.
• Brass end grommet offers a hanging point for a rod without its reel.
• Stops short of the reel and usually the hook keeper.
• 19 color and pattern choices help distinguish different outfits.
• One sleeve per pack.

Casting Sleeve Fit at a Glance

All color options share the same fit. The around measurement is circumference, not diameter; check clearance over your largest guide.

Tackle Express Tips

• Assign colors by technique, such as Blue for worm rods and Red for crankbait rods, so the right setup is easier to find.
• Slide the sleeve on gently. If it catches on a guide, stop and reposition it rather than forcing it.
• Secure hooks at the hook keeper, not on a guide, and keep the lure outside the mesh. A Stick Jacket Plug Jacket provides separate lure coverage to help reduce hook snags.

Before You Sleeve Your Setup

Will this fit an 8 ft casting rod?
This model is listed for rods up to 7 ft 6 in. Choose XL Casting for the longer fit, provided your guides also fall within its stated dimensions.

Can I leave a lure tied on?
Usually, yes. The sleeve normally stops short of the hook keeper. Keep the lure outside the mesh and do not place hooks on a guide.

Does the color affect the size?
No. Color and pattern options share the same Casting sleeve specifications. Pick the one that helps you identify your outfit.

Can I hang the rod from the sleeve?
The brass end grommet provides a hanging point for a rod without its reel. Remove the reel before using that storage method.

A good spinning rod deserves better than rubbing against the rest of your gear on the way to the water. Stick Jacket Spinning covers the rod blank and guides to help protect against everyday scratches while making your outfits easier to organize. Its expandable, finger-trap-style sleeve slips on and off, with room for the larger guides found on spinning rods.

Choose a color for each setup and make the next trip easier to pack. Blue for your drop-shot rod and Yellow for your Ned-rig outfit is one simple system: when you reach for a rod, its cover tells you which setup you packed.

Keep Your Spinning Guides Covered

Exposed guides can catch neighboring lines, and loose rods can rub together in storage or transit. This sleeve adds a layer between your rod and the gear around it without the bulk of a rigid case. It is a practical choice for routine handling, but a flexible cover is not crush protection. Use a protective travel case whenever heavy loads or impacts are a concern.

The Right Pick for Your Spinning Setup

Best for: organizing bass drop-shot, Ned-rig, shaky-head, and other finesse spinning outfits; storing trout and panfish rods; and covering appropriately sized inshore spinning setups. The sleeve is used between fishing sessions, not while casting or retrieving. Choose by rod length and guide clearance rather than species or fishing conditions.

This Spinning model accommodates rods up to 7 ft 6 in long and 7-5/8 in around. Check the largest guide before selecting a cover. For a casting outfit with smaller guides, compare the Stick Jacket Casting rather than choosing a spinning sleeve solely by rod length.

Simple Protection, Easy Identification

• Expandable sleeve covers the rod blank and guides.
• Spinning-specific fit provides room for larger guides.
• Finger-trap-style construction makes installation and removal straightforward.
• Nine color and pattern options help distinguish different outfits.
• One rod sleeve per pack.

Spinning Sleeve Fit at a Glance

All nine color options share the same fit. The around measurement is circumference, not diameter.

Give Each Outfit Its Own Color

Blue, Red, Yellow, Black, Pink, Purple, and Green offer straightforward color-coding choices. Contusion combines blue, red, and purple, while Black Crappie provides a black-and-white pattern. Choose by the setup you want to identify, not the species named in a pattern. Color does not change sleeve size.

Tackle Express Tips

• Assign colors by technique and keep that system consistent across your rod rack, vehicle, and boat.
• Guide the sleeve gently over the rod and stop if it catches. Reposition it instead of forcing it over a guide.
• Keep exposed hooks away from the mesh. Pair your sleeve with a Stick Jacket Plug Jacket for separate coverage of a tied-on lure.

Before You Cover Your Rod

Will this fit an 8 ft spinning rod?
This model is sized for rods up to 7 ft 6 in. Choose a cover rated for your rod's length and largest guide rather than stretching this one to fit.

Are the different colors different sizes?
No. All color and pattern variants in this listing share the same Spinning fit. Pick the option that makes your setup easiest to recognize.

Does it protect the reel or tied-on hooks?
This is a rod-and-guide sleeve, not a reel or lure cover. Protect those components separately and keep hooks out of the mesh.

Can it replace a hard rod case?
No. Use it for everyday surface protection and organization. A rigid case is the better choice when rods could be crushed or exposed to heavy impacts.

Choose your color at Tackle Express and give your spinning outfit a dedicated place in your gear lineup.

When a narrow rod sleeve struggles to clear your guides, a wider fit makes more sense. The Stick Jacket Big Magnum is a mesh rod cover sized for rods up to 8 ft 6 in long and 8-1/2 in around. It helps keep larger rod setups separated and covered during routine storage and transport, so unloading your gear is less of a sorting job.

Choose Blue or Black to organize your outfits without changing the fit. Whether you are packing for a bass trip or putting away a saltwater setup, start with the rod's length and guide profile rather than assuming one sleeve size fits everything.

More Room Around Your Guides

The Big Magnum's wider fit is its main reason to choose it over a slimmer sleeve. Exposed guides and line can catch on neighboring outfits; a mesh cover adds a layer between rods and helps keep them organized. It is useful for everyday handling, but it does not replace a rigid case where protection against crushing or heavy impacts is needed.

The Right Pick for a Larger Setup

Best for: storing and transporting larger rod profiles, organizing swimbait outfits for bass, and separating freshwater or saltwater setups that fall within the stated fit. The sleeve comes off before fishing, so its suitability depends on your rod dimensions, not the lure or technique you plan to use.

If your long casting rod only needs the narrower 3-7/8 in-around fit, compare the Stick Jacket XL Casting. For spinning rods up to 7 ft 6 in with a 7-5/8 in-around fit, consider the Stick Jacket Spinning. Choose the cover that clears your guides without forcing it.

Keep Your Gear Easy to Sort

• Wide-format mesh sleeve for larger rod and guide profiles.
• Fits rods up to 8 ft 6 in long and 8-1/2 in around.
• Covers the rod and guides for routine storage and transport.
• Blue and Black options for simple setup identification.
• One rod sleeve per pack.

Big Magnum Fit at a Glance

The around measurement describes circumference, not diameter. Blue and Black share these fit specifications.

Tackle Express Tips

• Check your largest guide as well as rod length before choosing a sleeve. Slide the cover on gently and stop if it catches.
• Use Blue for one group of outfits and Black for another, such as freshwater and saltwater gear, to make packing easier.
• Keep hooks clear of the mesh. Secure a tied-on lure outside the sleeve and use a Stick Jacket Plug Jacket for separate lure coverage.

Know Your Fit Before You Pack

Is the 8-1/2 in measurement a diameter?
No. It is the stated fit around the rod and guides. Check guide clearance as well as the rod's overall length.

Do Blue and Black fit differently?
No. Both colors use the same Big Magnum fit. Choose whichever helps you organize your rods.

Can I use it on a swimbait or saltwater rod?
Yes, if the rod and guides fall within the stated dimensions. Technique or species alone does not determine sleeve fit.

Will this replace a hard travel case?
No. Use it for covering and organizing rods during everyday storage and transport. Choose a rigid case when your gear needs structural protection.

Long casting rods deserve more than a loose pile in the truck or boat. The Stick Jacket XL Casting slides over your rod and guides to help protect them during everyday storage and transport, while keeping multiple setups easier to organize. Its finger-trap-style fit holds the sleeve on the rod, and five color choices let you identify your setups at a glance.

Designed for casting rods up to 8 ft 6 in long and 3-7/8 in around, this XL model gives longer rods a dedicated cover without enclosing the reel. Slip it off when you arrive, and spend less time sorting rods before your first cast.

Keep Long Rods Organized, Not Tangled

Exposed guides and line can catch on neighboring rods when several outfits travel together. A rod sleeve helps separate those setups and provides a protective layer around the blank and guides. It is a practical choice for carrying longer bass casting rods or appropriately sized inshore casting outfits, but it is not a substitute for a rigid case when crush protection is needed.

The Right Fit for Your Casting Setup

Choose the XL Casting when your rod needs the longer fit of this model. For casting rods up to 7 ft 6 in, consider the Stick Jacket Casting. For spinning rods with larger guides, choose a purpose-sized cover such as the Stick Jacket Spinning instead of forcing a casting sleeve over the guides.

Best for: organizing longer casting setups between bass or inshore trips, separating technique-specific rods, and protecting rods during routine storage and transport. Match the sleeve to the rod and guide profile, not just the fishing technique.

Simple Protection Between Trips

• Easy-on, easy-off sleeve covers the rod blank and guides.
• Finger-trap-style fit helps hold the sleeve in place.
• Tip grommet provides a hanging point.
• Designed to stop short of the reel and, in most cases, the hook keeper.
• Blue, Black, Lime Green, Yellow, and Red help distinguish different setups.
• One sleeve per pack.

XL Casting Fit at a Glance

The fit-around measurement is not a diameter. Check both rod length and guide clearance before choosing your cover.

Tackle Express Tips

• Assign a sleeve color to each technique so your jig, swimbait, or other casting setup is easier to find.
• Use the rod's hook keeper rather than attaching hooks to a guide. Hooks caught in the mesh can be difficult to remove.
• Slide the sleeve on gently and stop if a guide catches. Keep the tied-on lure outside the sleeve; a Stick Jacket Plug Jacket adds separate coverage around the lure to help reduce hook snags.

Before You Cover Your Rod

Does this cover the reel?
No. The sleeve is designed to stop short of the reel and usually the hook keeper, leaving those areas accessible.

Can I leave a lure tied on?
Yes, provided it stays outside the sleeve and is secured safely. Do not attach the hook to a guide where it can catch in the mesh.

Do the colors change the fit?
No. The five color options share the XL Casting fit specifications. Choose the color that makes your setup easiest to identify.

Is this the right cover for a spinning rod?
Choose a spinning-specific sleeve for the larger guides on a spinning rod. This model is sized for casting rods.

Long rods can be awkward to pack, especially when exposed guides catch neighboring lines and blanks rub against other gear. Stick Jacket Big Game 7 gives your rod a flexible mesh covering for everyday storage and transport, helping keep your outfits separated and their surfaces protected from routine contact.

Sized for rods up to 9 ft 6 in long and 6-1/4 in around, it is a practical choice when a shorter sleeve will not suit your setup. Choose Black or Blue to give a longer outfit a recognizable place in your rod rack before the next trip.

Keep Long Outfits Easier to Handle

A rod sleeve adds a layer between the blank, guides, and neighboring equipment while keeping packing simple. The mesh design is a convenient alternative to a bulky case for routine organization. It is not a rigid shield: use a protective rod case when your gear could be crushed or exposed to heavy impacts.

Choose by Length and Guide Clearance

Best for: storing and transporting appropriately sized long saltwater and freshwater outfits, separating technique-specific rods, and organizing gear before and after a trip. For anglers carrying live-bait, jig, or other big-game setups, fit matters more than the species on the trip plan. Check both your rod's length and its largest guide before selecting the sleeve.

Use the cover between fishing sessions and remove it before casting, trolling, or working a lure. Its value is in keeping your gear organized on the way to the water and in storage, not in changing how the rod fishes. For smaller casting outfits, compare the Stick Jacket Casting and select the model that matches your rod and guides.

Simple Details for a More Organized Rod Rack

• Flexible mesh sleeve covers the rod and guides for everyday storage and transport.
• Fits rods up to 9 ft 6 in long and 6-1/4 in around.
• Black and Blue options help distinguish different outfits.
• Both color options share the same fit.
• One sleeve per pack.

Big Game 7 Fit at a Glance

The around measurement is circumference, not diameter. Black and Blue share these specifications, so choose your color for identification rather than size.

Tackle Express Tips

• Use Black for one group of outfits and Blue for another, such as separating bait rods from lure rods. Keep your color system consistent from the garage to the boat.
• Guide the mesh gently over each guide. If it catches, stop and reposition it instead of pulling harder.
• Keep hooks outside the mesh and protect tied-on baits separately. A Stick Jacket Plug Jacket wraps the lure to help reduce hook snags around neighboring gear.

Before You Cover Your Big-Game Outfit

Does “Big Game 7” mean it only fits a 7 ft rod?
No. This model's fit is up to 9 ft 6 in long and 6-1/4 in around. Select it using those dimensions, not the number in the model name.

Are Black and Blue different sizes?
No. Both color options have the same fit and include one sleeve per pack.

Will it fit every saltwater rod?
No. Check length and clearance over the largest guide. A rod that is short enough can still have guides that need a wider cover.

Does it replace a travel case or cover my reel?
No. It is a flexible rod sleeve, not a rigid travel case or reel cover. Protect the reel separately and use structural protection when heavy impacts or crushing are possible.

Choose Black or Blue at Tackle Express and make your longer outfits easier to organize for the next trip.

Keep your longer outfits organized before the trip even starts. Stick Jacket Big Game 6 is a flexible mesh rod sleeve that adds a layer between your rod and neighboring gear during everyday storage and transport. Covering the blank and guides helps reduce routine rubbing and makes a bundle of rods easier to manage.

This model accommodates rods up to 8 ft 6 in long and comes in Black or Blue. Give each outfit its own color, and you can spend less time sorting through similar-looking setups when it is time to load the vehicle or boat.

Less Rubbing Between Trips

Loose rods can rub against each other, while exposed guides can catch nearby lines. A sleeve keeps a protective layer around the covered portion of the outfit without the bulk of a hard case. That makes it useful for routine organization, but flexible mesh is not crush protection. Use a rigid protective case when heavy loads or impacts could damage your gear.

The Right Cover Starts with Fit

Best for: organizing appropriately sized saltwater and freshwater rods, separating bait and lure outfits, and keeping longer setups covered in storage or on the way to the water. Anglers carrying live-bait, jig, or other technique-specific outfits can use the two colors to distinguish setups. Choose by rod length and clearance over the largest guide, not by target species alone.

Use the sleeve between fishing sessions and remove it before casting, trolling, or working a lure. If your rod needs a longer cover, compare the Stick Jacket Big Game 7, listed for rods up to 9 ft 6 in. Check the full fit of either model before choosing; extra length alone does not guarantee guide clearance.

Simple Details That Make Packing Easier

• Flexible mesh sleeve covers the rod blank and guides.
• Rod-length fit up to 8 ft 6 in.
• Black and Blue options make outfits easier to identify.
• One sleeve per pack.

Big Game 6 at a Glance

Check clearance over your largest guide before fitting the cover. Never force mesh over a guide that catches.

Tackle Express Tips

• Assign Black to one group of outfits and Blue to another, such as bait rods versus lure rods. Keep the same system in your rod rack and on the boat.
• Slide the cover on gently and reposition it if it catches. Avoid using extra force around guides or the rod tip.
• Keep exposed hooks out of the mesh. Use a Stick Jacket Plug Jacket for separate coverage of a tied-on lure to help reduce hook snags during transport.

Before You Sleeve Your Outfit

Does Big Game 6 mean it only fits a 6 ft rod?
No. The rod-length fit for this model is up to 8 ft 6 in. Check your rod's length and guide clearance rather than choosing by the model number.

How many covers are included?
One sleeve per pack, in your selected Black or Blue color.

Will this fit every rod under 8 ft 6 in?
Length is only part of the fit. The sleeve also needs to pass comfortably over the largest guide. Do not force it onto a rod with insufficient clearance.

Does it protect my reel or replace a travel case?
No. This is a flexible rod sleeve, not a reel cover or rigid case. Protect your reel separately and use structural protection when crushing or heavy impacts are possible.

Choose your color at Tackle Express and give your longer outfit a dedicated cover for the next trip.

Keep your favorite bait tied on without letting its hooks catch everything around it. The Stick Jacket Plug Jacket wraps around a rigged lure to help reduce snags on neighboring rods, gear, and vehicle interiors during storage and transport. Its clear plastic window lets you see which bait is ready to fish without opening the wrap.

Close the hook-and-loop edges around the lure, pack your outfit, and leave the retying for another day. Choose the Regular wrap for a more compact bait or the larger DD when the lure and hooks need extra room.

Keep Hooks Away from Neighboring Gear

A tied-on lure is convenient until exposed hooks catch a rod sleeve, loose line, or something in the car. Plug Jacket provides separate lure coverage so your ready-to-fish outfit is easier to handle between trips. The transparent panel also saves you from opening every wrap just to identify a bait.

This is a flexible lure wrap, not a rigid tackle box or a guarantee against hook injuries. Handle hooks carefully and make sure the wrap closes comfortably around the entire lure and its hooks.

Choose the Wrap That Closes Around Your Bait

Best for: transporting tied-on bass crankbaits, jerkbaits, topwater plugs, and appropriately sized swimbaits, plus freshwater or saltwater outfits with lures that fit inside the wrap. It is especially useful when carrying several rigged rods together in a car, boat, or RV. Remove the wrap before fishing; it protects your setup between sessions rather than changing the lure's action.

The Regular measures 6 in × 3.5 in, while DD measures 8 in × 4.5 in. These are wrap dimensions, not maximum lure lengths. Account for bait thickness, diving bills, and hook spread, leaving enough room for the edges to fasten without forcing them.

Small Details That Make Packing Easier

• Wraps around a lure that is already tied onto your outfit.
• Clear plastic window keeps the bait visible.
• Hook-and-loop edges secure the wrap around the lure.
• Regular and larger DD options accommodate different bait profiles.
• One lure wrap per pack.

Regular or DD at a Glance

Cover the Rod and Lure Separately

A lure wrap complements a rod sleeve rather than replacing it. Pair it with a correctly sized Stick Jacket Casting for casting outfits or Stick Jacket Spinning for spinning setups. Keep the lure outside the sleeve's mesh and use Plug Jacket for separate hook coverage.

Tackle Express Tips

• Choose by the whole bait profile, including hooks and diving bill. If the edges will not close easily, use a larger wrap instead of forcing the closure.
• Secure the lure at the rod's hook keeper before wrapping it, keeping hooks away from guides and sleeve mesh.
• Use the clear window to identify your setup before unpacking, then remove the wrap completely before making a cast.

Before You Wrap Your Lure

Can I leave the lure tied on?
Yes. Plug Jacket is designed to wrap around a lure that is already tied onto your rod setup.

How do I choose Regular versus DD?
Regular measures 6 in × 3.5 in; DD measures 8 in × 4.5 in. Choose the wrap that accommodates the lure, bill, and hooks while allowing the edges to close comfortably.

Can I see the bait without opening the wrap?
Yes. The clear plastic window lets you identify the lure inside.

Does this cover my rod or reel?
No. It covers the lure. Use a separate rod sleeve and reel cover for those parts of the outfit.

Choose your size at Tackle Express and keep your next rigged outfit easier to pack.

Keep your casting outfits organized without wrapping them in a bulky cover. Stick Jacket Pro Series Casting Rod Covers use braided polyethylene filament to cover the rod blank and guides, helping protect them from routine rubbing during storage and transport. The finger-trap-style braid grips the rod for a snug fit while keeping the sleeve flexible.

Choose Tungsten for a dark gray-and-black look or Cobalt for blue-and-gray braid. Assign each color to a technique, and the next time you load the boat, your worm rod and crankbait outfit are easier to tell apart at a glance.

Note: The package states a larger diameter than what we measured at Tackle Express.  The maximum opening of the sleeve at the opening is 1.5".  

Keep Blanks and Guides from Rubbing Together

Uncovered rods can rub against neighboring equipment, and exposed guides can catch loose line. The Pro Series adds a braided layer around the covered portion of the rod while keeping everyday handling straightforward. Its open weave offers an alternative to a solid neoprene cover, but it does not make a wet outfit ready for storage. Let your gear dry before putting it away.

A flexible sleeve helps with surface protection and organization; it does not replace a rigid travel case. Choose structural protection whenever rods could be crushed or exposed to heavy impacts.

A Practical Pick for Technique-Specific Casting Outfits

Best for: organizing bass casting setups for jigs, worms, crankbaits, and other techniques; keeping several outfits separated in a rod rack; and covering appropriately sized casting rods between trips. It is a storage and transport accessory, not an on-water performance upgrade. Remove the sleeve before fishing.

Choose by rod length and clearance over the largest guide rather than by species alone. The opening works best between the last guide and the rod handle. If you are comparing cover styles, the Stick Jacket Casting offers another casting-sleeve option; check each model's fit before selecting.

Details That Keep Your Gear Routine Simple

• Braided polyethylene filament construction.
• Finger-trap-style braid grips the rod for a snug fit.
• Covers the blank and guides for everyday storage and transport.
• Tungsten and Cobalt colors help identify different outfits.
• Flexible construction keeps packing less bulky than a rigid case.

Pro Series Construction at a Glance

Check your rod and guide clearance before fitting the cover. Never force a sleeve over a guide that catches.

Tackle Express Tips

• Choose a consistent color system, such as Tungsten for jig and worm outfits and Cobalt for moving-bait setups, so rods are easier to identify before launch.
• Guide the braid gently over the rod. If it catches on a guide, stop and reposition it instead of pulling harder.
• Secure tied-on lures at the hook keeper near the handle, keeping exposed hooks away from the sleeve. A Stick Jacket Plug Jacket provides separate lure coverage to help reduce hook snags during transport.

Before You Cover Your Casting Rod

What is the Pro Series cover made from?
It uses braided polyethylene filament with a finger-trap-style construction that grips the rod.

Which color should I choose?
Tungsten has a dark gray-and-black appearance; Cobalt has blue-and-gray braid. Pick the color that makes your outfit easiest to recognize.

Can I keep a lure tied on?
Keep the lure outside the braid and secure it at the hook keeper near the handle. Protect exposed hooks separately so they do not catch the sleeve or nearby gear.

Does this replace a hard case or reel cover?
No. It is a flexible rod-and-guide cover, not a crush-resistant case or reel cover. Use separate protection for the reel and a rigid case when heavier protection is needed.

Choose your Pro Series color at Tackle Express and make your casting outfits easier to organize for the next trip.