Okuma

The new Okuma Rockaway SP Surf Rods are designed specifically for the SoCal surf perch fisherman.  Obviously these can be used anywhere an angler would like, but these rods are dialed in for what these anglers are looking for.  The lightweight and responsive 24/30-ton carbon rod blanks are sensitive, with enough backbone to really set the hook on the predators roaming the surf.

The components on the Okuma Rockaway SP rods are well thought out.  These rods are designed with a 50/50 tip over butt ferrule connection giving it a solid feel.  They feature SeaGuide XQ series 316-stainless steel deep press guide frames that are designed to protect the inserts from the rough elements of surf fishing.  The inserts themselves are Zirconium for both braided and monofilament lines.  The Rockaway SP also has a SeaGuide stainless steel hook keeper, as well as a minimalized EVA split grip configuration to bring down the weight and keep you casting all day up and down the beach.  Be sure to check out the entire lineup of Rockaway Surf Fishing rods. 

Features:

• Light and responsive 24/30-ton carbon rod blanks
• Tip over butt ferrule connection for improved balance and feel
• SeaGuide XQ series angled 316 stainless steel guide frames
• Zirconium inserts offer compatibility for both braid and mono
• SeaGuide Stainless steel, double legged Trapezoid hook keeper
• Minimal EVA split grip design for reduced weight and balance 
• Rockaway SP Surf rods are backed by a 1-year limited warranty

Rod Models:

All Rods are packaged with extreme care!

Being fisherman ourselves we take pride in not having rods break during shipping, to ensure they'll be enjoyed and fished. We make sure every rod is wrapped tightly with bubble wrap in the crucial areas and are suspended in a thick rod tube, to keep from being crushed or banged around.

The Okuma PCH Custom Conventional Rods are designed specifically for West Coast anglers. The PCH Custom is lightweight and sensitive with enough strength and backbone to get fish to the boat!

The backbone to the PCH Custom rods is the patented blank construction process, called, Unidirectional Fiber Reinforcement or UFR. This patented process blends unidirectional fiber over 24-ton carbon in the extended tip section of the rod to increase lifting strength and power. UFR provides strength without sacrificing sensitivity, so anglers can feel the lightest of bites.

Okuma Reel Cover

Okuma Reel Shield Neoprene Reel Covers are seam sealed, water proof, neoprene reel covers that keep reels and drags dry and protected from dings, dirt, and dust. These covers have soft sides and a convenient velcro quick tab to easily take them off and on. Okuma Reel Shield Neoprene Reel Covers are made for a perfect fit to most star drag and lever drag reels.

For line counter reels, choose the next size up reel cover.

 Features:

Experience the ultimate inshore fishing performance with Okuma Hawaiian Custom B Spinning Rods. These rods, designed and built by local fishermen using cutting-edge technology, are tailored for specific species and regions, making them perfect for Hawaiian shore-based anglers. Trust in the expertise and passion of local anglers with the updated and improved Okuma Hawaiian Custom B Series Rods, built to satisfy your craving for the perfect catch. Elevate your game with versatile lengths and designs for whipping, chasing Menpachi, plugging, and sliding for Ulua. Making it an amazing Surf Rod for Southern California. 

The Okuma Rockaway Surf Rods are designed for serious surf fishing.  With 11 total models in the Rockaway lineup, you are bound to find what you need.  The 50/50 2pc blank construction is designed for long distance casting.  Models range from 8' to 12' in length and have a variety of actions available.

Features:

•  Extremely light weight and responsive 24-ton carbon rod blanks
•  UFR-II: Ultimate Flex Reinforcement rod tip technology
•  Tip over butt ferrule connection for improved balance
•  XQ series angled Sea Guide 316-Stainless steel frames
•  Zirconium inserts offer compatibility for both braid and mono
•  Tapered shrink tube grips for non-slip surface and durability
•  Rounded EVA butt cap for improved leverage while casting
•  Rockaway surf rods are backed by a 1-year limited warranty

All Rods are packaged with extreme care!

Being fisherman ourselves we take pride in not having rods break during shipping, to ensure they'll be enjoyed and fished. We make sure every rod is wrapped tightly with bubble wrap in the crucial areas and are suspended in a thick rod tube, to keep from being crushed or banged around. 

Okuma has expanded its acclaimed Rockaway series to bring you the Rockaway Travel Surf Rods. These new rods are specifically designed to cater to all your travel fishing needs, ensuring that you have the right gear on hand to snag that next personal best no matter where your adventures take you.

Rockaway Travel Surf Rods boast several exciting features that make them stand out from the competition. Crafted from premium quality 24-ton carbon fiber material, the rod blanks in the Rockaway Travel Surf Rods are not only incredibly lightweight but also remarkably strong. This results in a durable and responsive rod that can withstand the rigors of fishing while reducing fatigue during prolonged casting and retrieving. Additionally, the rods are equipped with UFR-II technology, providing the ultimate flex reinforcement in the rod tip.

When it comes to components, XQ series angled Sea Guide 316-Stainless steel frames with Zirconium inserts offer compatibility for both braid and mono while the 3-pcs blank construction with tip over butt ferrule connections makes it easy to pack and transport the rods wherever your travels take you. The tapered shrink tube grips offer a non-slip surface and durability, while the rounded EVA butt cap provides improved leverage when casting. The Rockaway Travel Surf Rods feature five total spinning models in a medium-heavy rod power. The rod lengths will range from 8-foot sixinch to twelve-foot and will feature either a medium-fast or medium rod taper.

Re-designed with passion, desire, and experience, the Okuma SST "a" Travel and Mooching Spinning Rods are elevating performance standards throughout cold-water fisheries. Species and technique-specific actions provide the definitive rod selection for salmon, steelhead, trout, kokanee, halibut, and sturgeon.

With Okuma IM-8 graphite providing a premium foundation (E-glass in halibut rods), the rest of the components build on SST excellence. Durable stainless steel guide frames feature braid-ready Zirconium inserts. Custom reel seats, premium grips, and a sleek metallic slate finish complete the SST "a" rod series as one that makes elite-level performance available to anglers of all levels of commitment.

Features:

• Technique and species-specific rod actions
• Light and responsive 24/30-ton low resin carbon blanks
• 3 or 4 pcs blank construction depending on model
• Sea Guide deep press guide frames for added durability
• Zirconium inserts offer compatibility for both braid and mono
• Premium cork fore and rear grip with rubber cork accents
• CG models feature woven carbon fore and rear grips
• Precision placed stainless steel hook keeper on all models
• Stainless steel hook keepers on all cork rod models
• Travel rods come packed in a protective SST rod tube
• SST rods are backed by a 1-year limited warranty

   Action  

The Okuma Makaira SEa 2 Speed Lever Drag Reels feature Special Edition Gun Metal and Black anodizing. The Carbonite dual force drag system maximizes high-end drag pressure, efficiency and overall smoothness. It’s over sized handle and lower low speed gearing versus the original Makaira serve up extreme torque for the Makaira SEa.

- Open spool bearings with TSI-301 oil. Increases freespool 2-1/2 times.
- All non-spool bearings feature full grease pack for maximum longevity.
- Features Special Edition Gun Smoke and Black anodizing. 
- SE reels feature a yellowfin tuna etched into the sideplate.
- Frames have been machined out for increased clearance between spool and cross bars.
- MK-8/10/15 feature MK-20 size handle knobs.
- MK-20/30 feature the MK-50 handle arm and knobs
- Lower speed 1.3:1 gear ratio featured in 20/30 sizes.
- Lower speed 1.0:1 gear ratio featured in 50 size.

MACHINED RIGID FRAME

T-BAR HANDLE

2-SPEED GEARING

LEVER DRAG DUAL FORCE DRAG

HELICAL CUT GEARING

SILENT ANTI-REVERSE

CRC

 Gun Metal color may vary.

The Okuma PCH Custom Inshore Casting Rods are the latest addition to a deep lineup of saltwater rods designed specifically for hardcore anglers.  The PCH Custom Inshore Rods were designed with the SoCal Calico Bass fisherman in mind.  Utilizing the latest in advanced technologies, these rods were built for the extreme conditions that the inshore fisherman face.

The PCH Custom Series Inshore Rods were designed with the latest technology and insight from leading inshore and tournament anglers from up and down the California coast.  The backbone to the PCH Custom Rods is Okuma's UFR-II: Ultimate Flex Reinforcement rod tip technology. This process blends unidirectional fiber over 24-ton carbon in the extended tip section of the rod to increase lifting strength and power by as much as 400%.  This technology provides for the ultimate in strength without sacrificing sensitivity so that you can feel even the lightest of bites.

The component system on the PCH Custom Series Inshore Rods is all top notch featuring Fuji K-guides with Alconite inserts on the Medium, Medium Heavy, and Heavy models.  All models also feature premium Fuji reel seats.  All models feature custom cork and TPE grip configuration for comfort and durability.  All PCH Custom Rods also have an ALPS non-skid rubber butt cap to reduce deck slide.  

FEATURES

Oversize shipping fee may apply!  Rods over 8 feet will have an additional shipping charge at checkout.

All Rods are packaged with extreme care!

Being fisherman ourselves we take pride in not having rods break during shipping, to ensure they'll be enjoyed and fished. We make sure every rod is wrapped tightly with bubble wrap in the crucial areas and are suspended in a thick rod tube, to keep from being crushed or banged around.

The Okuma PCH Custom rods are designed specifically for West Coast anglers. The PCH Custom is lightweight and sensitive with enough strength and backbone to get fish to the boat!

The backbone to the PCH Custom rods is the patented blank construction process, called, Unidirectional Fiber Reinforcement or UFR. This patented process blends unidirectional fiber over 24-ton carbon in the extended tip section of the rod to increase lifting strength and power. UFR provides strength without sacrificing sensitivity, so anglers can feel the lightest of bites.

Introducing Okuma's Tesoro Spinning reels, designed with an Alumilite body, side plate, and Cyclonic Flow Rotor for unparalleled strength. With IPX-7 waterproof technology, these reels offer the ultimate in features and protection. Dominate any fishing situation with the Tesoro Spinning reels.

The Tesoro features a 12HPB + 1RB corrosion-resistant stainless-steel bearing drive as well as a carbonite high output DFD drag system with Cal’s drag grease that puts out over 55-pounds of pure fish stopping drag. The reel is built with a custom titanium spool shaft that reduces flex and weight as well as oversized brass main gear and C-6191 brass pinion gear that is double supported with ball bearings. The frictionless main shaft design provides smooth operation day in and day out. The dual anti-reverse system provides maximum strength and reliability. The rigid machined aluminum screw-in handle design provides direct feedback when turning the handle and locks solidly into place. A rotor brake system works in conjunction with the Tesoro’s manual bail trip design.

There are five total models within the Tesoro Spinning reel lineup. A 6,000, 8,000, 10,000, 14,000, 18,000 and 20,000 size. The three smaller sizes feature high-speed gearing at 5.8:1 with retrieval of 49” of line per turn of the handle. The two larger sizes feature 4.4:1 gear ratio and pick up close to 42” of line per handle turn. All models have an interchangeable screw-in handle system that can be changed from left to right-hand retrieve.

The Okuma Cedros Spinning Reels are perfect for high-speed jigging, whether it's for tuna, snapper, or jack species. They are designed with a compact yet strong body, thanks to the Okuma Blade Body Design and Alumilite Construction. This provides the necessary strength for pulling fish off wrecks or stopping strong tuna. And with the precision Dual Force Drag system, you'll have smooth and balanced stopping power. For the ultimate fishing experience, pair the Cedros spinning reels with either the Cedros Speed Jig or Cedros Coastal rods for a perfectly matched system that will surely get your heart racing.

The NEW Okuma PCH Custom Spinning Rods are designed specifically for West Coast anglers. The PCH Custom is lightweight and sensitive with enough strength and backbone to get fish to the boat!

The backbone to the PCH Custom Spinning Rods is the patented blank construction process, called, Unidirectional Fiber Reinforcement or UFR. This patented process blends unidirectional fiber over 24-ton carbon in the extended tip section of the rod to increase lifting strength and power. UFR provides strength without sacrificing sensitivity, so anglers can feel the lightest of bites.

We have a great reel with lots of drag, level wind, at a great price.  The Okuma Convector Levelwind Reels and line counters revolutionized the fishing tackle industry, offering a powerful gearing and drag system platform previously unattainable at the Convector's value-oriented price. Today, the Convector has grown to a position as a staple in salmon fisheries from Alaska to the Great Lakes, and everywhere in between. The Convector's no-nonsense design features aluminum and stainless steel components at all critical stress points, along with Okuma's patented Mechanical Stabilization System that maintains parts alignment over the long term. Line counter models are available in both right and left hand retrieve to serve all anglers. 

Okuma's Convector Reels feature - 

The Okuma Rockaway Surf Spinning Reel is designed to provide surf anglers with advanced long cast capabilities at an incredible value. It has a 5.3:1 gear ratio, a maximum drag of 26-lbs, and weighs 17 ounces. It also has a 4BB + 1RB bearing drive, a CFR: Cyclonic Flow Rotor, and a rigid metal handle with an EVA knob.

Pros:

• Lightweight
• 26lbs of drag
• Long casting distance
• Heavy duty design
• Corrosion resistent 
• Good value

Okuma Rockaway Surf Spinning Reel Features:

• 4BB + 1RB bearing drive
• CFR: Cyclonic Flow Rotor
• Gear ratio: 5.3:1 (40.9'' retrieve)
• Maximum drag: 26-lbs
• Weight: 17.0 ounces
• Rigid metal handle / EVA knob