28 products
Sort by:
28 products
Avet Reel Clamp Kits are precision-machined from the same 6061-T6 aircraft-grade billet aluminum as Avet reels themselves, providing a strong, corrosion-resistant connection between your reel and rod. Available in three kit types across three reel size classes, with colored clamp kits offered in multiple anodized finishes to match your reel.
Important: These clamp kits do NOT fit SXJ Raptor or HXJ reels. All other clamps fit Raptor and G2 series reels. HX clamp kits cover the full HX series including HXJ and HXW. Colors may vary and photos may not represent color accurately.
Best For
Offshore trolling, stand-up big-game fishing, conventional reel setups, saltwater bottom fishing, and anglers looking to replace or color-match clamp hardware on their Avet SX, MXJ, MXL, JX, LX, HX, or EX series reels.
Tackle Express Tips:
- If you're fishing a deckhand rod, you must have a clamp since there is not reel seat. The Duran's Clamp will hold the reel better than the standard Avet Clamp.
- Put a little grease on the threads to make sure it seats into the reel tightly and reduces corosion.
- If you lost the screws, we also sell just the screws so you don't have to buy the entire clamp kit.
- The EX Clamp Kit also fits the JX, HX, and HXW reels but has an added hole to the side of the clamp. This is originally used for a trolling strap but can be used to secure your hook or lure while not fishing.
Kit Types
- Screw Set — Replacement screws only. Fits SX, MXJ, MXL reels.
- Stud and Nut Set — Replacement studs and nuts only. Fits JX, LX, HX or EX reels (select correct size).
- Colored Clamp Kit — Full clamp with hook/jig holder (no screws or tools included). Available in multiple anodized colors. 1 kit per bag.
Compatibility & SKU Reference
| SKU | Kit Type | Fits Avet Models |
|---|---|---|
| AVT-SCRWSET | Screw Set | SX, MXJ, MXL |
| AVT-STUDNUTSET | Stud and Nut Set | JX, LX, HX, HXJ, HXW |
| AVT-STUDNETEX | Stud and Nut Set | EX series |
| AVE180–AVE196 | Colored Clamp Kit | SX, MXJ, MXL (multiple colors) |
| AVE181–AVE198 | Colored Clamp Kit | JX, LX, HX, HXJ, HXW (multiple colors) |
| EX_SIL, EX_RD, EX_GMT, EX_GLD, EX_BLU | Colored Clamp Kit | EX series (multiple colors) |
Compatibility Guide
| Kit Size | Fits Avet Models |
|---|---|
| SX / MXJ / MXL | SX, MXJ, MXL (Screw Set or Colored Clamp) |
| JX / LX / HX | JX, LX, HX, HXJ, HXW (Stud & Nut Set or Colored Clamp) |
| EX | EX series (Stud & Nut Set or Colored Clamp) |
The Avet Reel Cover is custom-made for Avet reels but fits most other brands as well. Constructed from neoprene — the same material used in wetsuits — it provides durable, form-fitting protection for your reel. A hook and loop band wraps around the handle to keep the cover secure, and a ring on top lets you clip your lure or hook while the reel is still on the rod. Available in five sizes to fit everything from compact baitcasters to large offshore reels.
The Small size also works great on low-profile baitcasting reels — we've used it on everything from Daiwa 300s to Shimano Curados with a solid fit.
Key Features
- Neoprene construction — durable, form-fitting protection
- Hook and loop handle band — wraps around the handle to keep cover in place
- Top lure ring — clip your hook or lure while the reel is on the rod
- 5 sizes available — fits Avet SX through EX50/EXW50 and most other brands
Size Guide
| Size | Fits |
|---|---|
| Small | All Avet SX reels; low-profile baitcasters (Daiwa 300, Shimano Curado, etc.) |
| Medium | All Avet MXJ, MXL reels |
| Large | All Avet JX, LX, HXJ, HX, HXW reels |
| X-Large | All Avet EX30 reels |
| XX-Large | All Avet EX50, EXW50 reels |
Avet Reel Bags are high-quality padded nylon soft-sided cases built to organize and protect your reels during travel and storage. The main cargo area features movable padded dividers with hook-and-loop attachments so you can configure the compartments to fit your reels. Multiple roomy zippered pockets handle leaders, tools, manuals, and accessories. A wide, comfortable adjustable shoulder strap with quick-release buckles makes transport easy.
Made from heavy-duty black nylon with a color-embroidered Avet marlin logo on the front. Removable shoulder strap included.
Please review dimensions carefully before ordering — customers are often surprised by the size of the Large case.
Key Features
- Padded nylon construction — heavy-duty protection for travel and storage
- Movable padded dividers — hook-and-loop attachments for custom reel compartment configuration
- Multiple zippered pockets — store leaders, tools, manuals, and accessories
- Adjustable shoulder strap — wide, comfortable, with quick-release buckles; removable
- Color-embroidered Avet marlin logo on front
- 2 sizes available — Medium and Large
Size Guide
| Size | Dimensions | Pockets | Reel Compartments |
|---|---|---|---|
| Medium | 14" x 9" x 8" | 6 | Up to 6 |
| Large | 22" x 14" x 12" | 10 | Up to 10 (zippered expansion seam) |
Note: Free returns are not available on this product. Oversize shipping charges will be applied at checkout.
The Avet HXW Raptor 2-Speed Lever Drag Reel is the wide-spool version of Avet's HX Raptor series, offering the same 40 lb strike / 50 lb full dual carbon fiber drag output as the HXJ but with significantly more line capacity — 100 lb braid at 620 yards. Built on a true one-piece 6061-T6 marine-grade aluminum frame, the HXW Raptor is designed for serious offshore big game fishing in the 50–100 lb line class where maximum line capacity is critical. No MC Cast Control System on this model. Available in right and left hand retrieve (Silver No-MC LH). Made in USA.
Key Features
- Dual Avedrag carbon fiber drag system — 2x the drag output of standard series; up to 40lb strike / 50lb full
- Wide spool — 100 lb braid / 620 yards capacity
- Two-speed gear ratios — 5.4:1 high / 1.9:1 low
- 9 stainless steel ball bearings (Raptor series)
- Precision-machined 6061-T6 marine-grade aluminum — true one-piece frame
- Patented silent dog-and-gear anti-reverse system
- Precision-machined stainless steel gears
- Lever drag with adjustable strike pre-set
- Offset machined handle arm — reduces centerline profile and cranking wobble
- Large soft-touch handle knob
- Alarm clicker
- Matching machined aluminum rod clamp included
- Hard-anodized finish — superior corrosion resistance
- No MC Cast Control System on this model
- Made in USA
HX Series Raptor Comparison
| Model | Line Class | Gear Ratios | Braid Capacity | Max Drag | Inches Per Crank | MC Cast | Weight |
|---|---|---|---|---|---|---|---|
| HXJ 5/2 Raptor | 50–100 lb | 5.4:1 (H) / 1.9:1 (L) | 80 lb — 300 yds | Strike: 40 lb / Full: 50 lb | 47" (H) / 17" (L) | Optional | 27 oz |
| HX 5/2 Raptor | 50–100 lb | 5.4:1 (H) / 1.9:1 (L) | 80 lb — 500 yds | Strike: 40 lb / Full: 50 lb | 47" (H) / 17" (L) | Optional | 29 oz |
| HXW 5/2 Raptor | 50–100 lb | 5.4:1 (H) / 1.9:1 (L) | 100 lb — 620 yds | Strike: 40 lb / Full: 50 lb | 47" (H) / 17" (L) | No MC | 32 oz |
The Avet MXL Raptor Series 2-Speed Lever Drag Reel features Avet's patented dual carbon fiber drag system delivering twice the drag output of the standard series — up to 21 lbs at strike and 31 lbs at full. The MXL's wider spool gives it more line capacity than the MXJ while maintaining the same compact frame, making it a versatile choice for yellowtail, tuna, and inshore to mid-range offshore applications. Built on a true one-piece 6061-T6 marine-grade aluminum frame with the MC Cast Control System for precise spool management. Available in right and left hand retrieve (Silver LH). Made in USA.
Key Features
- Dual Avedrag carbon fiber drag system — 2x the drag output of standard series; up to 21lb strike / 31lb full
- Patented MC Cast Control System — 5 magnetic settings for precise spool control
- Two-speed gear ratios — 6.4:1 high / 3.8:1 low
- 9 stainless steel ball bearings (Raptor series)
- Precision-machined 6061-T6 marine-grade aluminum — true one-piece frame
- Patented silent dog-and-gear anti-reverse system
- Precision-machined stainless steel gears
- Lever drag with adjustable strike pre-set
- Offset machined handle arm — reduces centerline profile and cranking wobble
- Large soft-touch handle knob
- Alarm clicker
- Matching machined aluminum rod clamp included
- Hard-anodized finish — superior corrosion resistance
- Made in USA
Specs
| Spec | Detail |
|---|---|
| Model | MXL 6/4 Raptor MC |
| Gear Ratios | 6.4:1 (high) / 3.8:1 (low) |
| Speed | 2-Speed |
| Max Drag (Strike) | 21 lb |
| Max Drag (Full) | 31 lb |
| Ball Bearings | 9 stainless steel (Raptor) |
| Cast Control | MC (5 magnetic settings) |
| Retrieve | Right hand standard; left hand in Silver available |
| Colors Available | Silver, Blue, Black, Gunmetal (RH); Silver (LH) |
| Origin | Made in USA |
Note: Line capacity specs not listed by manufacturer for this model. Contact us for details.
The Avet LX Raptor Series 2-Speed Lever Drag Reel is Avet's most powerful mid-frame Raptor reel, featuring the patented dual carbon fiber drag system that delivers twice the drag output of the standard series — up to 28 lbs at strike and 38 lbs at full. Built on a true one-piece 6061-T6 marine-grade aluminum frame, the LX Raptor steps up from the MXL with greater drag capacity and line capacity for targeting larger tuna, yellowtail, and offshore gamefish. Available with or without the MC Cast Control System, and in right and left hand retrieve (Silver LH). Made in USA.
Note: The Silver No-MC variant ($434.99) does not include the MC Cast Control System. All MC variants are $474.99. All models are right hand unless specified as Left Hand.
Key Features
- Dual Avedrag carbon fiber drag system — 2x the drag output of standard series; up to 28lb strike / 38lb full
- Two-speed gear ratios — 6.3:1 high / 3.0:1 low
- 9 stainless steel ball bearings (Raptor series)
- Precision-machined 6061-T6 marine-grade aluminum — true one-piece frame
- Patented silent dog-and-gear anti-reverse system
- Precision-machined stainless steel gears
- Lever drag with adjustable strike pre-set
- Offset machined handle arm — reduces centerline profile and cranking wobble
- Large soft-touch handle knob
- Alarm clicker
- Matching machined aluminum rod clamp included
- Hard-anodized finish — superior corrosion resistance
- MC Cast Control System available — 5 magnetic settings (select MC variants)
- Made in USA
Specs
| Spec | Detail |
|---|---|
| Model | LX 6/3 Raptor |
| Gear Ratios | 6.3:1 (high) / 3.0:1 (low) |
| Speed | 2-Speed |
| Max Drag (Strike) | 28 lb |
| Max Drag (Full) | 38 lb |
| Ball Bearings | 9 stainless steel (Raptor) |
| Cast Control | MC (5 magnetic settings) or No-MC — select variant |
| Retrieve | Right hand standard; left hand in Silver MC available |
| Colors Available | Silver No-MC, Gunmetal MC, Blue MC, Black MC, Silver MC, Gold MC (RH); Silver MC (LH) |
| Origin | Made in USA |
Note: Line capacity specs not listed by manufacturer for this model. Contact us for details.
The Avet SX Raptor Series 2-Speed Lever Drag Reel features Avet's patented dual carbon fiber drag system delivering twice the drag output of the standard series — up to 17 lbs at strike and 26 lbs at full. Built on a true one-piece 6061-T6 marine-grade aluminum frame with precision-machined stainless steel components, the SX Raptor pairs the compact SX platform with serious stopping power and the MC Cast Control System for precise spool management on the cast. Right hand retrieve. Made in USA.
Key Features
- Dual Avedrag carbon fiber drag system — 2x the drag output of standard series; smooth, consistent stopping power
- Patented MC Cast Control System — 5 magnetic settings for precise spool control
- Two-speed gear ratios — 6.4:1 high / 3.8:1 low
- 9 stainless steel ball bearings (Raptor series)
- Precision-machined 6061-T6 marine-grade aluminum — true one-piece frame
- Patented silent dog-and-gear anti-reverse system
- Precision-machined stainless steel gears
- Lever drag with adjustable strike pre-set
- Offset machined handle arm — reduces centerline profile and cranking wobble
- Large soft-touch handle knob
- Alarm clicker
- Matching machined aluminum rod clamp included
- Hard-anodized finish — superior corrosion resistance
- Made in USA
Specs
| Spec | Detail |
|---|---|
| Model | SX 6/4 MC Raptor |
| Gear Ratios | 6.4:1 (high) / 3.8:1 (low) |
| Speed | 2-Speed |
| Max Drag (Strike) | 17 lb |
| Max Drag (Full) | 26 lb |
| Mono Capacity | 300 yds / 25 lb • 220 yds / 30 lb |
| Braid Capacity | 880 yds / 40 lb • 630 yds / 50 lb • 420 yds / 65 lb • 330 yds / 80 lb |
| Ball Bearings | 9 stainless steel (Raptor) |
| Cast Control | MC (5 magnetic settings) |
| Retrieve | Right hand only |
| Colors Available | Blue, Silver, Gold, Red, Gunmetal, Green, Black |
| Origin | Made in USA |
The Avet HX Raptor 2-Speed Lever Drag Reel is the standard-width version of Avet's HX Raptor series, sitting between the narrow HXJ (300yd) and wide HXW (620yd) with 80 lb braid at 500 yards. It delivers the same 40 lb strike / 50 lb full dual carbon fiber drag output as the rest of the HX Raptor family, built on a true one-piece 6061-T6 marine-grade aluminum frame. Available with or without the MC Cast Control System, and in right and left hand retrieve (Silver MC LH). Made in USA.
Key Features
- Dual Avedrag carbon fiber drag system — 2x the drag output of standard series; up to 40lb strike / 50lb full
- Two-speed gear ratios — 5.4:1 high / 1.9:1 low
- 9 stainless steel ball bearings (Raptor series)
- Precision-machined 6061-T6 marine-grade aluminum — true one-piece frame
- Patented silent dog-and-gear anti-reverse system
- Precision-machined stainless steel gears
- Lever drag with adjustable strike pre-set
- MC Cast Control System available — 5 magnetic settings (select MC variants)
- Offset machined handle arm — reduces centerline profile and cranking wobble
- Large soft-touch handle knob
- Alarm clicker
- Matching machined aluminum rod clamp included
- Hard-anodized finish — superior corrosion resistance
- Made in USA
HX Series Raptor Comparison
| Model | Line Class | Gear Ratios | Braid Capacity | Max Drag | Inches Per Crank | MC Cast | Weight |
|---|---|---|---|---|---|---|---|
| HXJ 5/2 Raptor | 50–100 lb | 5.4:1 (H) / 1.9:1 (L) | 80 lb — 300 yds | Strike: 40 lb / Full: 50 lb | 47" (H) / 17" (L) | Optional | 27 oz |
| HX 5/2 Raptor | 50–100 lb | 5.4:1 (H) / 1.9:1 (L) | 80 lb — 500 yds | Strike: 40 lb / Full: 50 lb | 47" (H) / 17" (L) | Optional | 29 oz |
| HXW 5/2 Raptor | 50–100 lb | 5.4:1 (H) / 1.9:1 (L) | 100 lb — 620 yds | Strike: 40 lb / Full: 50 lb | 47" (H) / 17" (L) | No MC | 32 oz |
The Avet JX Raptor 2-Speed Lever Drag Reel is the Raptor-series upgrade to the JX platform — delivering twice the drag output of the standard series with up to 28 lbs at strike and 38 lbs at full via the patented dual carbon fiber drag system. The JX's taller, narrower spool design provides faster line retrieval and a distinct advantage for vertical jigging and deep drops, while the MC Cast Control System's 5 magnetic settings give you precise spool control on the cast with fewer backlashes. The increased drag combined with braided line and a top shot opens up fish you wouldn't expect from a reel this size. Available in right and left hand retrieve. Made in USA.
Key Features
- Dual Avedrag carbon fiber drag system — 2x the drag output of standard series; up to 28lb strike / 38lb full
- Patented MC Cast Control System — 5 magnetic settings for precise spool control and longer casts
- Two-speed gear ratios — 6.3:1 high / 3.8:1 low
- 9 stainless steel ball bearings (Raptor series)
- Light, narrow spool design — optimized for jig casting efficiency and reduced line leveling on retrieve
- Precision-machined 6061-T6 marine-grade aluminum — true one-piece frame
- Patented silent dog-and-gear anti-reverse system
- Precision-machined stainless steel gears
- Lever drag with adjustable strike pre-set
- Offset machined handle arm — reduces centerline profile and cranking wobble
- Large soft-touch handle knob
- Alarm clicker
- Matching machined aluminum rod clamp included
- Hard-anodized finish — superior corrosion resistance
- Made in USA
Specs
| Spec | Detail |
|---|---|
| Model | JX 6/3 Raptor MC |
| Gear Ratios | 6.3:1 (high) / 3.8:1 (low) |
| Speed | 2-Speed |
| Max Drag (Strike) | 28 lb |
| Max Drag (Full) | 38 lb |
| Ball Bearings | 9 stainless steel (Raptor) |
| Cast Control | MC (5 magnetic settings) |
| Retrieve | Right hand standard; left hand available |
| Colors Available | Blue, Black, Silver, Red, Gunmetal (RH); Silver (LH) |
| Origin | Made in USA |
Note: Line capacity specs not listed by manufacturer for this model. Contact us for details.
The Avet MXJ Raptor Series 2-Speed Lever Drag Reel features Avet's patented dual carbon fiber drag system delivering twice the drag output of the standard series — up to 17 lbs at strike and 26 lbs at full. Built on a redesigned true one-piece 6061-T6 marine-grade aluminum frame, the MXJ Raptor combines the narrow MXJ spool profile with serious offshore stopping power and the MC Cast Control System for precise spool management on the cast. Available in right and left hand retrieve (Silver LH). Made in USA.
Key Features
- Dual Avedrag carbon fiber drag system — 2x the drag output of standard series; smooth, consistent stopping power
- Patented MC Cast Control System — 5 magnetic settings for precise spool control
- Two-speed gear ratios — 6.4:1 high / 3.8:1 low
- 9 stainless steel ball bearings (Raptor series)
- Precision-machined 6061-T6 marine-grade aluminum — redesigned true one-piece frame
- Patented silent dog-and-gear anti-reverse system — redesigned with more engagement teeth to reduce handle back-play
- Precision-machined stainless steel gears
- Lever drag with adjustable strike pre-set, ratcheting glide plate, and strike stop button
- Offset machined handle arm — reduces centerline profile and cranking wobble
- Large soft-touch handle knob
- Redesigned loud alarm clicker
- Matching machined aluminum rod clamp included
- Hard-anodized finish — superior corrosion resistance
- Made in USA
Specs
| Spec | Detail |
|---|---|
| Model | MXJ Raptor M.C. |
| Gear Ratios | 6.4:1 (high) / 3.8:1 (low) |
| Speed | 2-Speed |
| Max Drag (Strike) | 17 lb |
| Max Drag (Full) | 26 lb |
| Ball Bearings | 9 stainless steel (Raptor) |
| Cast Control | MC (5 magnetic settings) |
| Retrieve | Right hand standard; left hand in Silver available |
| Colors Available | Silver, Black, Blue, Gunmetal, Gold (RH); Silver (LH) |
| Origin | Made in USA |
Note: Line capacity specs not listed by manufacturer for this model. Contact us for details.
The Avet SXJ Raptor Series 2-Speed Lever Drag Reel features Avet's patented dual carbon fiber drag system delivering twice the drag output of the standard series — up to 17 lbs at strike and 26 lbs at full. Built on a true one-piece 6061-T6 marine-grade aluminum frame with precision-machined stainless steel components, the SXJ Raptor combines compact size with serious offshore stopping power. The MC Cast Control System provides five magnetic settings for precise spool control on the cast. Available in right and left hand retrieve. Made in USA.
Key Features
- Dual Avedrag carbon fiber drag system — 2x the drag output of standard series; smooth, consistent stopping power
- Patented MC Cast Control System — 5 magnetic settings for precise spool control
- Two-speed gear ratios — 6.4:1 high / 3.8:1 low
- 9 stainless steel ball bearings (Raptor series)
- Precision-machined 6061-T6 marine-grade aluminum — true one-piece frame
- Patented silent dog-and-gear anti-reverse system
- Precision-machined stainless steel gears
- Lever drag with adjustable strike pre-set
- Offset machined handle arm — reduces centerline profile and cranking wobble
- Large soft-touch handle knob
- Alarm clicker
- Matching machined aluminum rod clamp included
- Hard-anodized finish — superior corrosion resistance
- Made in USA
Specs
| Spec | Detail |
|---|---|
| Model | SXJ 6/4 MC Raptor |
| Gear Ratios | 6.4:1 (high) / 3.8:1 (low) |
| Speed | 2-Speed |
| Max Drag (Strike) | 17 lb |
| Max Drag (Full) | 26 lb |
| Braid Capacity | 350 yds / 20 lb • 300 yds / 30 lb • 230 yds / 50 lb |
| Ball Bearings | 9 stainless steel (Raptor) |
| Cast Control | MC (5 magnetic settings) |
| Retrieve | Right hand standard; left hand in Silver available |
| Colors Available | Blue, Silver, Red, Gold, Black (RH); Silver (LH) |
| Origin | Made in USA |
Wide-Profile Two-Speed Power for Trophy Big Game
The Avet HX 5/2 Raptor Plus MC 2 Speed Reels deliver wide-profile two-speed power designed for serious trophy big game anglers. Built with Avet's legendary precision machining and advanced features including the Raptor drag system and MC (Multi-Color) anodized finish, these reels provide exceptional power, massive line capacity, and uncompromising durability for battling the largest tuna, marlin, and other trophy offshore gamefish. Made in the USA, the HX 5/2 Raptor Plus MC represents the ultimate in Avet's wide-profile big game reel lineup.
Best For
- Giant bluefin and yellowfin tuna on long-range trips
- Marlin, sailfish, and trophy billfish offshore
- Large yellowtail and white seabass on heavy tackle
- Deep-water jigging for trophy pelagic species
- Long-range party boat fishing requiring maximum line capacity
- Any big game situation demanding maximum power and drag
Two-Speed Power for Trophy Fish
- Dual Gear Ratios: 5.0:1 high speed and 2.4:1 low speed optimized for trophy big game
- High Speed (5.0:1): Gain line on running fish and work lures efficiently
- Low Speed (2.4:1): Ultra-powerful ratio delivers maximum cranking power when trophy fish sound or make deep runs
- Wide Profile: Wide HX design provides maximum line capacity for long-range fishing
- Smooth Shifting: Reliable two-speed mechanism allows quick transitions during extended battles
Advanced Raptor Drag System
- Raptor Drag: Advanced carbon fiber drag system provides smooth, consistent performance under extreme pressure
- Massive Drag Capacity: Exceptional drag power handles the most powerful trophy gamefish
- Heat Dissipation: Advanced materials maintain consistent performance during marathon battles
- Precise Adjustment: Fine-tune drag settings for optimal fish-fighting performance
Premium Heavy-Duty Construction
- Precision Machined: CNC-machined from solid 6061-T6 aircraft-grade aluminum for maximum strength
- MC Anodized Finish: Multi-color anodized finish provides corrosion resistance and a distinctive look
- Stainless Steel Components: Premium stainless steel gears and hardware withstand extreme saltwater environments
- Sealed Bearings: High-quality sealed bearings provide smooth rotation and corrosion resistance
- Lever Drag: Precise lever drag control for quick adjustments during the fight
- Made in USA: Proudly manufactured in California with exceptional quality control
Models
| Model | SKU | Hand | Color |
|---|---|---|---|
| HX 5/2 Raptor Plus MC | HX5/2RAPMC-PLUS-SIL/RED | Right | Silver/Red |
| HX 5/2 Raptor Plus MC | HX5/2RAPMC-PLUS-BLK/RED | Right | Black/Red |
| HX 5/2 Raptor Plus MC | HX5/2RAPMC-PLUS-SIL | Right | Silver |
| HX 5/2 Raptor Plus MC | HX5/2RAPMC-PLUS-BLU | Right | Blue |
| HX 5/2 Raptor Plus MC | HX5/2RAPMC-PLUS-BLK | Right | Black |
| HX 5/2 Raptor Plus MC | HX5/2RAPMC-PLUS-GM | Right | Gunmetal |
| HX 5/2 Raptor Plus MC | HX5/2RAPMC-PLUS-LEFTHAND-S | Left | Silver |
Experience the legendary big game performance that trophy hunters trust. The Avet HX 5/2 Raptor Plus MC isn't just a reel—it's a precision tool built to handle the largest gamefish with maximum line capacity.
Conquer trophy big game with Avet HX 5/2 Raptor Plus MC—where wide-profile capacity meets legendary power.
The Avet HXJ Raptor 2-Speed Lever Drag Reel is Avet's heavy-duty narrow-frame big game reel, featuring the patented dual carbon fiber drag system that delivers twice the drag output of the standard series — up to 40 lbs at strike and 50 lbs at full. Built on a true one-piece 6061-T6 marine-grade aluminum frame, the HXJ Raptor is designed for targeting large tuna, yellowfin, bluefin, and other powerful offshore gamefish in the 50–100 lb line class. The MC Cast Control System provides 5 magnetic settings for precise spool control. Available in right and left hand retrieve (Silver LH). Made in USA.
Key Features
- Dual Avedrag carbon fiber drag system — 2x the drag output of standard series; up to 40lb strike / 50lb full
- Two-speed gear ratios — 5.4:1 high / 1.9:1 low
- 9 stainless steel ball bearings (Raptor series)
- Precision-machined 6061-T6 marine-grade aluminum — true one-piece frame
- Patented silent dog-and-gear anti-reverse system
- Precision-machined stainless steel gears
- Lever drag with adjustable strike pre-set
- MC Cast Control System — 5 magnetic settings
- Offset machined handle arm — reduces centerline profile and cranking wobble
- Large soft-touch handle knob
- Alarm clicker
- Matching machined aluminum rod clamp included
- Hard-anodized finish — superior corrosion resistance
- Made in USA
HX Series Raptor Comparison
| Model | Line Class | Gear Ratios | Braid Capacity | Max Drag | Inches Per Crank | MC Cast | Weight |
|---|---|---|---|---|---|---|---|
| HXJ 5/2 Raptor | 50–100 lb | 5.4:1 (H) / 1.9:1 (L) | 80 lb — 300 yds | Strike: 40 lb / Full: 50 lb | 47" (H) / 17" (L) | Optional | 27 oz |
| HX 5/2 Raptor | 50–100 lb | 5.4:1 (H) / 1.9:1 (L) | 80 lb — 500 yds | Strike: 40 lb / Full: 50 lb | 47" (H) / 17" (L) | Optional | 29 oz |
| HXW 5/2 Raptor | 50–100 lb | 5.4:1 (H) / 1.9:1 (L) | 100 lb — 620 yds | Strike: 40 lb / Full: 50 lb | 47" (H) / 17" (L) | No MC | 32 oz |
Precision-Engineered Versatility for Serious Anglers
The Avet JX G2 Lever Drag Reel delivers exceptional versatility through optimized line capacity, powerful drag performance, and a narrow-spool design that excels in both vertical jigging and casting applications.
Why the JX Profile Matters
The JX's taller, narrower spool design offers distinct advantages over the MX series:
- Faster line retrieval: Increased spool diameter delivers more inches per crank without sacrificing torque
- Easier line management: Narrower profile reduces side-to-side travel when respooling
- Vertical fishing advantage: Optimized geometry for deep drops and rapid retrieval
MC Cast Control System
Five magnetic settings (1-5) provide precise spool control during the cast. Higher settings reduce backlash risk and actually increase distance—especially valuable for anglers transitioning to conventional reels. Setting 1 offers maximum spool freedom; Setting 5 delivers maximum control.
2-Speed Advantage
Switch to low gear when fighting circling fish near the boat. The increased torque lets you rest the rod on the rail and crank steadily against horizontal resistance—less fatigue, more control, better hookup-to-landing ratio.
G2 Series Engineering
- Precision-machined 6061-T6 marine-grade aluminum and stainless steel components
- Hard-anodized finish for superior corrosion resistance
- True one-piece frame maximizes strength-to-weight ratio
- Lever drag with adjustable strike preset, ratcheting glide plate, and strike stop button
- Precision-machined stainless steel gears
- Patented silent dog-and-gear anti-reverse with enhanced engagement teeth to minimize handle back-play
- Avedrag dry carbon fiber drag system for smooth, consistent stopping power
- 40% more drag output than Classic Series: up to 21 lbs. strike, 28 lbs. full
- 8 stainless steel ball bearings
- Redesigned loud alarm clicker
- Offset machined handle arm reduces wobble and centerline profile
- Large soft-touch handle knob for all-day comfort
- Matching machined aluminum rod clamp included
- Proudly made in the USA
Technical Specifications
| Speed | 2-Speed | Line Class | 25-50 lb |
| Braid Capacity | 65 lb / 400 yds | Maximum Drag | Strike: 21 lb Full: 28 lb |
| Retrieve Rate | High: 46" Low: 22" |
Gear Ratio | High: 6.3:1 Low: 3.8:1 |
| Spool Width | 2" | Reel Diameter | 2-3/4" |
| Handle | 2-3/4" oval knob | Weight | 23 oz |
| Harness Lugs | None | Frame | One-piece machined |
Ideal for yellowtail, tuna, and other mid-range saltwater species where versatility and reliability are non-negotiable.
The Avet HXJ 5/2 Raptor Plus MC is Avet's heavy-duty two-speed lever drag reel built for serious trophy big game fishing. CNC-machined from solid 6061-T6 aircraft-grade aluminum and finished in Avet's multi-color (MC) anodized coating, it pairs the narrow HXJ profile with the upgraded Raptor carbon fiber drag system — delivering massive, consistent drag pressure through extended battles with bluefin tuna, marlin, and other large offshore gamefish.
The 5.0:1 high gear lets you gain line on running fish and work lures efficiently. Drop into the 2.4:1 low gear when a trophy fish sounds or makes a deep run and you need maximum cranking power. Available in right and left hand retrieve. Made in California.
Key Features
- Two-speed gear ratios — 5.0:1 high / 2.4:1 low for versatile big game performance
- Raptor drag system — advanced carbon fiber drag for smooth, consistent pressure under extreme load
- CNC-machined 6061-T6 aluminum frame — aircraft-grade construction for maximum strength and durability
- MC anodized finish — multi-color corrosion-resistant coating
- Narrow HXJ profile — comfortable grip despite heavy-duty construction
- Lever drag — precise, quick drag adjustments during the fight
- Stainless steel gears and hardware — built for saltwater environments
- Available in right and left hand retrieve
- Made in USA — manufactured in California
Specs
| Spec | Detail |
|---|---|
| Gear Ratios | 5.0:1 (high) / 2.4:1 (low) |
| Drag System | Raptor carbon fiber lever drag |
| Frame Material | CNC-machined 6061-T6 aircraft aluminum |
| Finish | MC (multi-color) anodized |
| Retrieve | Right hand (standard) / Left hand available |
| Target Species | Bluefin tuna, yellowfin tuna, marlin, sailfish, large yellowtail |
| Origin | Made in USA (California) |
Extra-Wide Two-Speed Power for Maximum Line Capacity
The Avet HXW 5/2 Raptor Plus Non-MC 2 Speed Reels deliver extra-wide two-speed power designed for serious trophy big game anglers who demand maximum line capacity. Built with Avet's legendary precision machining and advanced Raptor drag system, these reels provide exceptional power, massive line capacity, and uncompromising durability for battling the largest tuna, marlin, and other trophy offshore gamefish. The HXW 5/2 Raptor Plus represents the ultimate in Avet's extra-wide big game reel lineup.
Two-Speed Power for Trophy Fish
- Dual Gear Ratios: 5.0:1 high speed and 2.4:1 low speed optimized for trophy big game
- High Speed: 5.0:1 retrieve for gaining line on running fish and working lures
- Low Speed: Ultra-powerful 2.4:1 ratio delivers maximum cranking power for battling the largest gamefish
- Extra-Wide Profile: Extra-wide HXW design provides maximum line capacity for long-range fishing
- Smooth Shifting: Reliable two-speed mechanism allows quick transitions during extended battles
Advanced Raptor Drag System
- Raptor Drag: Advanced carbon fiber drag system provides smooth, consistent performance under extreme pressure
- Massive Drag Capacity: Exceptional drag power handles the most powerful trophy gamefish
- Heat Dissipation: Advanced materials maintain consistent performance during marathon battles
- Precise Adjustment: Fine-tune drag settings for optimal fish-fighting performance
- Proven Reliability: Trusted drag system for serious big game fishing
Premium Heavy-Duty Construction
- Precision Machined: CNC-machined from solid 6061-T6 aircraft-grade aluminum for maximum strength
- Corrosion-Resistant Finish: Premium anodized finish provides corrosion resistance and durability
- Stainless Steel Components: Premium stainless steel gears and hardware withstand extreme saltwater environments
- Sealed Bearings: High-quality sealed bearings provide smooth rotation and corrosion resistance
- Maximum Line Capacity: Extra-wide spool holds massive amounts of line for long-range trophy fishing
- Lever Drag: Precise lever drag control for quick adjustments during the fight
- Made in USA: Proudly manufactured in California with exceptional quality control
Trophy Big Game Applications
The HXW 5/2 Raptor Plus excels in demanding trophy big game fishing where maximum line capacity is absolutely critical. Target giant bluefin and yellowfin tuna on long-range trips, battle trophy marlin and sailfish, pursue large yellowtail and white seabass, work deep-water jigs for trophy fish, or handle any situation requiring maximum power and line capacity. The ultra-powerful 2.4:1 low speed provides unmatched cranking power when trophy fish sound or make deep runs, while the 5.0:1 high speed allows you to gain line efficiently. The extra-wide profile provides the absolute maximum line capacity needed for long-range trophy fishing.
Key Features
| Feature | Benefit |
|---|---|
| Two-Speed (5.0:1 / 2.4:1) | Optimized for trophy big game |
| Extra-Wide Profile | Maximum line capacity |
| Raptor Drag System | Massive drag capacity |
| Precision Machined | Maximum strength and durability |
| Made in USA | Exceptional quality control |
Avet Quality and Precision
Avet has been the choice of serious big game anglers for decades, and the HXW 5/2 Raptor Plus continues this proud tradition with heavy-duty precision machining and advanced features. Every reel is manufactured in California to exacting standards and tested to ensure reliable performance. From long-range crews to tournament fishermen pursuing trophy fish, the HXW 5/2 Raptor Plus delivers the power and line capacity that serious big game fishing demands.
Experience the legendary big game performance that trophy hunters trust. The Avet HXW 5/2 Raptor Plus isn't just a reel—it's a precision tool built to handle the largest gamefish with absolute maximum line capacity.
Conquer trophy big game with Avet HXW 5/2 Raptor Plus—where extra-wide capacity meets legendary power.
Next-Generation Compact Single Speed for Versatile Fishing
The Avet G2 MXJ Single Speed Lever Drag Reels deliver next-generation compact single speed power designed for versatile offshore and inshore anglers who prefer simplicity and reliability. Built with Avet's legendary precision machining and enhanced G2 (Generation 2) features in a narrow-profile design, these reels provide exceptional power, smoothness, and durability for battling tuna, yellowtail, and other gamefish. The G2 MXJ Single Speed represents Avet's commitment to continuous innovation in proven compact single-speed design.
Enhanced G2 Compact Single Speed Design
- Single Speed Simplicity: Reliable single-speed design eliminates complexity for maximum dependability
- Optimized Gear Ratio: Carefully selected gear ratio provides ideal balance of speed and power
- Narrow Profile: Compact MXJ design fits comfortably in hand for all-day fishing
- Smooth Operation: Precision gearing ensures buttery-smooth retrieves under all conditions
- G2 Enhancements: Improved design features for enhanced performance and reliability
Premium Lever Drag System
- Lever Drag Control: Precise lever drag provides quick, accurate adjustments during the fight
- Smooth Drag Performance: Advanced drag system provides consistent performance under pressure
- Powerful Drag Capacity: Exceptional drag power handles serious offshore and inshore gamefish
- Heat Dissipation: Advanced materials maintain consistent performance during extended battles
- Preset Capability: Set drag to desired setting and return to it instantly with lever
Premium Construction and Durability
- Precision Machined: CNC-machined from solid 6061-T6 aircraft-grade aluminum for maximum strength
- Corrosion-Resistant Finish: Premium anodized finish provides corrosion resistance and durability
- Stainless Steel Components: Premium stainless steel gears and hardware withstand saltwater environments
- Sealed Bearings: High-quality sealed bearings provide smooth rotation and corrosion resistance
- G2 Improvements: Enhanced features based on years of fishing experience
- Made in USA: Proudly manufactured in California with exceptional quality control
Versatile Offshore and Inshore Applications
The G2 MXJ Single Speed excels across versatile fishing applications where compact design and proven simplicity are valued. Target yellowfin and bluefin tuna on offshore trips, pursue yellowtail and white seabass on the coast, fish for dorado and wahoo, work deep-water jigs for rockfish and lingcod, or handle serious inshore gamefish. The compact narrow profile provides all-day comfort while the single-speed design delivers dependable performance without the complexity of multi-speed systems, making it ideal for anglers who value proven simplicity and maximum reliability.
Key Features
| Feature | Benefit |
|---|---|
| G2 Single Speed | Enhanced next-generation simplicity |
| Narrow Profile | Compact, comfortable all-day fishing |
| Lever Drag | Precise, quick adjustments |
| G2 Enhancements | Improved design and reliability |
| Made in USA | Exceptional quality control |
Avet Quality and Innovation
Avet has been the choice of serious anglers for decades, and the G2 MXJ Single Speed continues this proud tradition with next-generation enhancements and precision machining in a compact design. Every reel is manufactured in California to exacting standards and tested to ensure reliable performance. From weekend anglers to professional crews and tournament fishermen, the G2 MXJ Single Speed delivers the power and versatility that serious fishing demands.
Experience the next-generation compact performance that versatile anglers trust. The Avet G2 MXJ Single Speed isn't just a reel—it's a precision tool built with enhanced features and proven simplicity.
Dominate versatile fishing with Avet G2 MXJ Single Speed—where compact design meets proven reliability.
Compact Two-Speed Power for Versatile Offshore Fishing
The Avet JX 6/3 Raptor MC Plus 2 Speed Reels deliver compact two-speed power designed for versatile offshore and inshore fishing. Built with Avet's legendary precision machining and advanced features including the Raptor drag system and MC (Multi-Color) anodized finish, these reels provide exceptional power, smoothness, and durability in a compact narrow-profile design. The JX 6/3 Raptor MC Plus represents the perfect balance of power and versatility in Avet's lineup.
Two-Speed Versatility in Compact Design
- Dual Gear Ratios: 6.0:1 high speed and 3.0:1 low speed provide maximum versatility
- High Speed: Fast 6.0:1 retrieve for quickly gaining line on running fish or working lures
- Low Speed: Powerful 3.0:1 ratio delivers maximum cranking power for battling trophy fish
- Narrow Profile: Compact JX design fits comfortably in hand for all-day fishing
- Smooth Shifting: Reliable two-speed mechanism allows quick transitions during the fight
Advanced Raptor Drag System
- Raptor Drag: Advanced carbon fiber drag system provides smooth, consistent performance under extreme pressure
- Powerful Drag Capacity: Exceptional drag power handles serious offshore and inshore gamefish
- Heat Dissipation: Advanced materials maintain consistent performance during extended battles
- Precise Adjustment: Fine-tune drag settings for optimal fish-fighting performance
- Reliable Performance: Proven drag system trusted by serious anglers
Premium Construction and Durability
- Precision Machined: CNC-machined from solid 6061-T6 aircraft-grade aluminum for maximum strength
- MC Anodized Finish: Multi-color anodized finish provides corrosion resistance and distinctive appearance
- Stainless Steel Components: Premium stainless steel gears and hardware withstand saltwater environments
- Sealed Bearings: High-quality sealed bearings provide smooth rotation and corrosion resistance
- Lever Drag: Precise lever drag control for quick adjustments during the fight
- Made in USA: Proudly manufactured in California with exceptional quality control
Versatile Offshore and Inshore Applications
The JX 6/3 Raptor MC Plus excels across versatile fishing applications. Target yellowfin and bluefin tuna on offshore trips, pursue dorado and wahoo with high-speed retrieves, fish for yellowtail and white seabass on the coast, work deep-water jigs for rockfish and lingcod, or handle serious inshore gamefish. The compact narrow profile provides all-day comfort while the two-speed gearing delivers tactical advantages—use high speed to gain line quickly, then shift to low speed for maximum cranking power when needed.
Key Features
| Feature | Benefit |
|---|---|
| Two-Speed (6.0:1 / 3.0:1) | Maximum versatility for all situations |
| Narrow Profile | Compact, comfortable all-day fishing |
| Raptor Drag System | Smooth, consistent performance |
| MC Anodized Finish | Corrosion resistance, distinctive look |
| Made in USA | Exceptional quality control |
Avet Quality and Precision
Avet has been the choice of serious anglers for decades, and the JX 6/3 Raptor MC Plus continues this proud tradition with precision machining and advanced features in a compact design. Every reel is manufactured in California to exacting standards and tested to ensure reliable performance. From weekend anglers to professional crews and tournament fishermen, the JX 6/3 Raptor MC Plus delivers the power and versatility that serious fishing demands.
Experience the legendary performance that versatile anglers trust. The Avet JX 6/3 Raptor MC Plus isn't just a reel—it's a precision tool built to handle diverse fishing challenges.
Dominate versatile fishing with Avet JX 6/3 Raptor MC Plus—where compact design meets two-speed power.
The Avet Winch JX 6/3S is a true big-game conventional reel built in a remarkably compact, castable frame. It packs three gears, an ultra-low 2.0:1 "winch" ratio, and Avet's legendary lever drag system into the same JX-sized housing that has become the saltwater standard on the West Coast and beyond. Three gears give you the range of a much larger reel — shift up to cover water, down to crank, and all the way to low when a fish of a lifetime sounds and refuses to budge.
Machined from a single block of 6061-T6 aircraft-grade aluminum and built around stainless steel internals, the Winch JX 6/3S is engineered to grind. Whether you're slow-trolling live bait for bluefin, dropping jigs deep for tuna and yellowtail, or pulling big amberjack and grouper off structure, the combination of gear range, drag control, and one-piece frame strength lets you put serious heat on fish without sacrificing a balanced, fishable setup. Proudly designed and manufactured by Avet Reels in the USA.
Three Gears, One Reel
- High gear — 6.3:1: Fast retrieve for covering water, working surface irons, and gaining line on running fish.
- Middle gear — 3.8:1: The everyday workhorse ratio — enough speed to stay tight on a circling fish, enough torque to keep the pressure on.
- Winch gear — 2.0:1: Ultra-low cranking power. When a big tuna sounds, or a fish bogs down on heavy drag, you drop into winch and turn heads.
Key Features
- 3-speed lever drag — push-button shifter lets you change gears on the fly without breaking concentration on the fight.
- Massive drag output -70lbs
- One-piece 6061-T6 aluminum frame — CNC-machined from aircraft-grade aluminum for maximum rigidity under heavy drag pressure.
- Stainless steel internals — gears, bearings, and hardware built to survive the saltwater environment.
- Ratcheting glide plate with strike stop — pre-set your drag and shift from free spool to strike to full with precise, repeatable feel.
- Silent dog and gear anti-reverse — Avet's patented bulletproof anti-reverse eliminates handle back-play under load.
- Oversized power handle — provides the leverage and grip needed to work the low-range gears effectively during long battles.
- Loud alarm clicker — audible line-out alert for baitfishing and trolling applications.
- Three premium anodized finishes — available in Gunmetal, Silver, and Black.
- Made in USA — designed and manufactured in Chatsworth, California.
Ideal For
The Winch JX 6/3S shines whenever fish need to be muscled out of deep water, heavy current, or structure. Top applications include:
- Live-bait fishing for yellowfin and bluefin tuna
- Vertical jigging for tuna, yellowtail, and amberjack
- Deep-drop and bottom fishing for grouper, snapper, and rockfish
- Long-range sportboat rail rod setups
- Heavy inshore and offshore trolling where a compact profile matters
Specifications
| Spec | Detail |
|---|---|
| Model | Winch JX 6/3S |
| Max Drag | 70lbs |
| Gear Speeds | 3-Speed |
| Gear Ratios | 6.3:1 (high) / 3.8:1 (mid) / 2.0:1 (winch) |
| Drag Type | Lever Drag |
| Frame Material | CNC-machined 6061-T6 aircraft-grade aluminum |
| Internals | Stainless steel gears and hardware |
| Anti-Reverse | Silent dog and gear (patented) |
| Retrieve | Right hand |
| Colors Available | Gunmetal, Silver, Black |
| Target Species | Yellowfin & bluefin tuna, yellowtail, amberjack, grouper, rockfish |
| Brand | Avet Reels |
| Origin | Made in USA (Chatsworth, California) |
Premium Two-Speed Power for Offshore Big Game
The Avet MXL 6/3 Raptor Plus MC 2 Speed Reels deliver premium two-speed power designed for serious offshore big game anglers. Built with Avet's legendary precision machining and advanced features including the Raptor drag system and MC (Multi-Color) anodized finish, these reels provide exceptional power, smoothness, and durability for battling tuna, marlin, wahoo, and other trophy offshore gamefish. The MXL 6/3 Raptor Plus MC represents the pinnacle of Avet's offshore reel design.
Two-Speed Versatility
- Dual Gear Ratios: 6.0:1 high speed and 3.0:1 low speed provide maximum versatility
- High Speed: Fast 6.0:1 retrieve for quickly gaining line on running fish or working lures
- Low Speed: Powerful 3.0:1 ratio delivers maximum cranking power for battling trophy fish
- Smooth Shifting: Reliable two-speed mechanism allows quick transitions during the fight
- Tactical Advantage: Adapt your retrieve speed to match fishing conditions and fish behavior
Advanced Raptor Drag System
- Raptor Drag: Advanced carbon fiber drag system provides smooth, consistent performance under extreme pressure
- Massive Drag Power: Exceptional drag capacity handles the most powerful offshore gamefish
- Heat Dissipation: Advanced materials maintain consistent performance during extended battles
- Precise Adjustment: Fine-tune drag settings for optimal fish-fighting performance
- Reliable Performance: Proven drag system trusted by serious offshore anglers
Premium Construction and Durability
- Precision Machined: CNC-machined from solid 6061-T6 aircraft-grade aluminum for maximum strength
- MC Anodized Finish: Multi-color anodized finish provides corrosion resistance and distinctive appearance
- Stainless Steel Components: Premium stainless steel gears and hardware withstand saltwater environments
- Sealed Bearings: High-quality sealed bearings provide smooth rotation and corrosion resistance
- Lever Drag: Precise lever drag control for quick adjustments during the fight
- Made in USA: Proudly manufactured in California with exceptional quality control
Offshore Big Game Applications
The MXL 6/3 Raptor Plus MC excels in demanding offshore big game fishing. Target trophy tuna on long-range trips, battle marlin and sailfish on the troll, pursue wahoo and dorado with high-speed retrieves, work deep-water jigs for grouper and amberjack, or fish live bait for trophy gamefish. The two-speed gearing provides tactical advantages throughout the fight—use high speed to gain line quickly, then shift to low speed for maximum cranking power when the fish sounds or runs deep.
Key Features
| Feature | Benefit |
|---|---|
| Two-Speed (6.0:1 / 3.0:1) | Maximum versatility for all situations |
| Raptor Drag System | Smooth, consistent performance |
| Precision Machined | Maximum strength and durability |
| MC Anodized Finish | Corrosion resistance, distinctive look |
| Made in USA | Exceptional quality control |
Avet Quality and Precision
Avet has been the choice of serious offshore anglers for decades, and the MXL 6/3 Raptor Plus MC continues this proud tradition with precision machining and advanced features. Every reel is manufactured in California to exacting standards and tested to ensure reliable performance. From weekend anglers to professional crews and tournament fishermen, the MXL 6/3 Raptor Plus MC delivers the power and durability that serious offshore fishing demands.
Experience the legendary offshore performance that big game specialists trust. The Avet MXL 6/3 Raptor Plus MC isn't just a reel—it's a precision tool built to handle the toughest gamefish in the ocean.
Dominate offshore waters with Avet MXL 6/3 Raptor Plus MC—where two-speed versatility meets legendary power.
Showing 20/28
Next