Best Sellers

Owner Weighted Beast Hooks with twist lock is one of the finest hooks made for soft swimbaits or thicker plastic baits.  The extra wide gap allows for a thicker plastic lure and the centering pin makes rigging a breeze.  With Owner's patented center pin twist lock, the position of the hook is perfect and won't wander to one side or the other when you twist it on. 

The weight on the shank acts as a keel and won't let the bait roll over or wobble uncontrollably.  The 3X strong wired hook can land big fish without bending or letting the fish off.  With the super sharp point, this hook is sure to become one of your favorites, it is one of our favorites.  Next time you need an extra wide gap weighted hook, try the Owner Weighted Beast Hook.

Features:

• Centering Pin spring
• Open/full gap
• No slip rigging
• 3X strong hook
• Super Needle Point
• Perfect for swimbaits

The Avet Reel Cover is custom made for Avet reels but works with most other brands.  It's made of neoprene, similar to what is used for wetsuits.  A band wraps around the handle and uses Velcro to adhere to itself to protect the handle.  Avet also put a ring on the top so you can attach your lure or hook to it while the reel is on the rod.  They come in four sizes to fit most any size reel.  We think its the best reel cover we've ever seen.

We have also found the small size great for low profile bait casting reels.  We have used it on everything from Daiwa 300's to Shimano Curado's and it fits very well.  Try it out on your low profile reel instead of using a lesser quality cover, we think you'll like it.

SMALL
Fits all SX reels

MEDIUM
Fits all MXJ, MXL reels

LARGE

Fits all JX, LX, HXJ, HX, HXW reels

X-LARGE

Fits all EX30 Reels.

XX-LARGE

Fits all EX50, EXW 50 reels

The Rapala X-Rap Slashbait is killer in Spring and Fall but works year round when fish are chasing bait fish.  Suspending X-Rap® Saltwater lures are designed to be cast or trolled and display the X-Rap Attitude these baits are known for.

Built to withstand saltwater fisheries with Perma Steel 3X hooks, these baits can be cast or trolled. Rip 'em for xtreme, erratic Slashbait® action or troll for classic Rapala ® "wounded-minnow" action. Prominent scales and lateral line, internal holographic foil for optimum flash combine with internal long-cast system and 3D holographic eyes to create the ultimate fishing lure.

Avet Reel Clamp Kits come with studs, screws, and crossbar.  It's made of the same 6061-T6 aluminum that the reel is made of for a strong connection with the rod.  If you have lost yours or it's just time for a new one, the Avet reel clamp kit is sure to fit the bill.

1 kit per bag

Screws are as shown.

Clamp with hook/jig holder is just the clamp without screws or tools.

All clamps fit Raptor series as well as G2 reels.

HX clamp kits refers to entire series including HXJ and HXW.

These do NOT fit SXJ Raptor or HXJ Reels.

Colors may vary and pictures may not represent the color accurately.  

The Tady 45 Surface Iron is the king of surface irons.  Works great for tuna, yellowtail, calico bass, wahoo, dorado, barracuda, and even white sea bass.  Simply cast it as far as you can and wind it straight back to the boat with a fast retrieve.  

There is no need to impart action into the jig, just point the rod tip at it and wind it back.  You may need to allow it to sink just a little under the surface before you start winding so it catches water.  

We prefer throwing irons on 30# or 40# monofilament line in general but the size of the fish being caught, the size of your reel, and the weight of the jig all play a part in deciding what line to use.

The hooks may change depending on the availability at the Tady warehouse.  Don't worry though, they all catch fish and they are all plenty strong.

Color and hook manufacturer varies on each lure and may not be exactly like the picture shows.  Scratches are common on all Tady Lures, they get scratched in transit to us  and these scratches don't impact the ability to catch fish.

The Tady 4/0 Iron is a heavy yoyo iron for vertical deep water jigging for yellowtail and bottom fish.  It works best for fish on deep structure or if you need to get jig to fall fast through the column to get past unwanted species.  The Tady 4/0 is one of our favorite heavy jigs, simply let if fall to the desired depth and then wind it up as fast as you can.  You can also pull the tip up fast and then drop the tip and repeat.  These are deadly on yellowtail and tuna!  

Color and hook manufacturer varies on each lure and may not be exactly like the picture shows.  Scratches are common on all Tady Lures, they get scratched in transit to us and these scratches don't impact its ability to catch fish.

6 oz

5.75"

The Halco Max 130 is a great trolling and casting lure for salt and freshwater species.  The Max 130 can be trolled at high speeds of up to 12 knots and has very little trolling resistance due to it's slender profile.  The slim tail design gives it excellent hook exposure for great hook sets.  

Crafted in Australia, Halco engineered the Max 130 to hook fish and stand up to the mightiest catches. Its construction, including hooks, split rings, and hardware, are robust—capable of bringing in tuna up to hundreds of pounds. Furthermore, with a variety of attractive colors, you can easily find the ideal lure for your fishing conditions.

Although mainly a trolling lure, the Max 130 can be used in a cast and retrieve method as well.  Use a high speed reel and burn it back for the correct action on the lure.  It measures 5 1/2" and 2.82 ounces.  Give it a try on tuna, yellowtail, barracuda, wahoo, stripers, and many other aggressive species.  

The hooks and hardware on all Halco products is as tough as it gets.  You can fish them with confidence, even on tuna over 300lbs.  The split rings and treble hooks are 4X strong and with the wire through construction, the fish will give up far before the lure will.  

The finish is second to none with bright colors and extreme details.  No small detail has been overlooked and is certain to catch fish from The Gulf to Southern California.  Tie on a Halco Max 130 and hang on tight.

130mm/5.12" / 80g/2.82 oz. 

There is perhaps no other jerkbait that is more coveted than the Megabass Vision OneTen.  The tungsten weights increase casting distance and allow for a more slender bait, reducing drag in the water when retrieved.  

The Katsuage hooks that come stock on the Vision 110 are light wire for easy penetration correct balance.  Megabass intends this bait to be fished on light line, preferably 6 to 10lb pound test.  Using light line allows the bait to reach its optimal swimming depth of four to six feet, but also enables the bait to move more freely in the water.  

Retrieved properly, the Vision 110 not only darts from side to side but it does so in an arching fashion shooting up, and then back down as you jerk your rod tip.  Additionally, as the bait is being pulled in the water it moves sideways from top to bottom giving off a color and flash, but it also has a rear movement from side to side.  Heavier line and hooks have the potential to impede action taking the bait out of its factory tuned equilibrium.

The Salas 7X Light Surface Iron Jig is one of the most iconic surface irons in existence. It's easy to fish and like all Salas, it gets bit.  Cast it as far as you can, let it sink for a couple seconds, and then a nice steady retrieve back.  Not too slow and not too fast, just enough so that a methodical erratic action takes place.  

Salas is hand made in Southern California and has been proven time and time again.  Each one has superior paint jobs and a thick clear coat that will stand up over time but even if the paint comes off, they still get bit.  We've found they get bit even better when the paint has scratches and looks a little beat up.  Yellowtail have teeth and can be very aggressive, this over time will remove the paint and clear coat.  Many panga fisherman like to scrape them on the launch ramp to get some of the paint off.  

Try out different colors, fish will eat them all but sometimes they will bite one color more than another.  We generally like to fish darker colors in low light conditions and lighter colors when there is more sun.

3.6 oz

6 3/8" painted portion

1  1/8" Wide

8" (painted portion and hook)

Made in the USA

The Salas 6X Yo-Yo Iron Jig is a yellowtail catching machine.  The shape and color of these heavy jigs creates the illusion of a fleeing baitfish from the depths.  It triggers a bite from a variety of species but yellowtail off the Southern California coast is the main reason we use these jigs.

Simply drop it down to the bottom or desired depth, put the reel in gear and bring it back at a fast but steady retrieve.  If they are there, they will eat it!

The lure may spin as it come up, that is ok and gets bit really well.  You are trying to get a reaction out of the fish and if it looks like it's going to get away, a yellowtail will hunt it down.  Hang on tight though, when they hit it they will hit it hard.  

The hook and rings are heavy enough for most yellowtail but you can also catch tuna on them.  Usually they like chrome or chrome blue, but they will eat other colors.  Barracuda and dorado will also bite any Salas Lure as long as it's moving fast.  

6.3 oz

6" (body)

1  1/16" Wide

7 3/4" (body and hook)

The paint may differ since they are hand made.  Often times the pain get's chipped in shipping to us, being shipped in bulk. It doesn't change the fish catching ability of the jig.  It's going to chip when it hits the bottom and get all scratched up on the fight back to the boat. DO NOT let this affect your confidence on your fish catching abilities. We have all seen the jigs that have little to no paint left on them that get bit just fine if not better.  If you have questions, feel free to call us.

The Duran's DFP Super Reel Clamp is fully precision machined out of billet aircraft grade 6061 Aluminum, and 100% made in the USA. Using state of the art CNC milling machines we take the block of aluminum and using various carbide cutters we bring the clamp to life.

This clamp is newest and most versatile clamp in today’s market with confirmed fitment on 40 plus reels it is a true universal clamp all in one.  The clamp is designed to be mounted on your rod and to be able to interchange reels without removing any screws or taking off the clamp.

Does NOT fit SX or MX series Avet reels.

Mini Kit

The mini kit comes with smaller screw sets and a shallow dish for smaller diameter rods. Such as UC Rods, Calstar 800 and Seeker 270’s.

Large Kit

The large kit comes with longer screw sizes and a deeper dish for larger diameter rods. Such as Seeker Uluas, 6480’s, 540’s, Phenix HAF, and most 9-10ft jig sticks

The Mini Super Clamp is the first clamp of its kind designed to fit smaller reels on skinnier rods. It fits reels that do not come with stock clamps where an aftermarket attachment is a necessity to mount on a deckhand rod. It fits the Lexa 300, Tranx 300, Avet SXJ(non raptor), Trinidad 12 and Trinidad 16NA to name a few. These reels do not come with a stock clamp and have been an issue mounting on deckhand rods for years. With constant requests we took the challenge and now created a clamp for theses smaller reels. While the clamp is extremely versatile it has its limitations on the diameter rod it can be mounted on. The clamp is designed to fit rod diameters between 1 1/8″ – 7/8″ (28MM- 22MM) which is appropriate for the reel class size 10-25lb rods. Some rod examples are Seeker 196,270, Calstar 800XL, 800L Phenix M1.

Mini Super Clamp Kit Fits:

Shimano: Tranx 300 and 500, Trinidad 10-20 and 16NA, Torium 14-20.

Daiwa: Lexa 300, Saltiga 10-400, Saltist 15-40.

Avet: SXJ (for raptor model must purchase our Avet Replacment Reel Foot)

 The DaHo Reverse Latch Threading Needles design came from Jerry Brown, a pioneer in the development of hollow spectra fishing lines. We appreciate his design as this product brings some unique features and ease of use characteristics that we try to provide in all our products. Below is a picture showing the ends of the new DaHo Reverse Latch Needle in detail:

In the past, one of the first tools available to work with hollow spectra lines were latch needles that originally came from fabric knitting machines. They are still used today, but our Reverse Latch needle is the only tool available that uses the latch mechanism as it was designed to be used - to be pulled through the line, keeping the latch mechanism closed by the line's internal pressure. Without our 'reverse' use of the latch mechanism, the old knitting machine latch needles have to be pushed into the hollow spectra lines causing to latch to open, and usually resulting in significant damage the line's fibers.

Many of the loop creation and splicing techniques require that a line be released by the tool, while it is threaded up another line. Normal loop splicing needles will not work in these situations as they cannot release a line from the loop.  In those types of operations, our DaHo Reverse Latch Splicing Needles allow the latch to open, releasing the held line, when needed. Also, since they are now attached to our standard 6" needles, so you can now make longer loops and splices without the limitations of the old latch needles. With our Reverse Latch needle, the latch is always the trailing end of the tool.

We are now offering three sizes of the Reverse Latch Splicing needle. The following table shows the details of the DaHo Reverse Latch Splicing Needles:

The Owner Cover Shot Hooks, Model 4107 is a light finesse style hook for rigging small worms and baits.  Typically used as a drop shot hook, this hook is made from fine wire for easy hooksets with light lines.  The bait keeper is meticulously wrapped onto the shank to prevent the keeper from sliding or spinning.  The monofilament keeper allows soft, supple baits to be threaded over it without damage, yet still holds extremely well once on the other side.  Owner Cover Shot Hooks come with Super Needle Point and Silky Gray friction-less finish.