Two-Speed Reels

Penn Fathom II 2-Speed Lever Drag Reels give offshore anglers the speed to find line and the low-gear control to finish a hard fight. With the current range covering 25 through 80 sizes, this conventional lever-drag platform is built for serious saltwater work, from nearshore targets to heavy offshore applications.

Speed When You Need It, Power When It Counts

The Quick Shift II 2-speed system lets you change gears when the fight changes. Use high gear to pick up line quickly, then shift down when a tuna, yellowtail, or other powerful saltwater fish digs deep. Pull-to-Turn preset drag adjustment helps keep your chosen setting consistent while you work.

What This Reel Solves Offshore

Heavy tackle can feel bulky, while a single-speed reel forces a compromise between fast retrieve and winching power. The Fathom II combines both priorities in one rigid, full-metal conventional reel, with line-capacity rings for a quick read and a double-dog ratchet anti-reverse for dependable engagement.

Best For

• Offshore trolling for tuna and yellowtail
• Nearshore and offshore live-bait or bait fishing
• Heavy conventional setups where gear changes matter
• Long runs, deep fights, and situations that demand line pickup plus cranking control
• Right- and left-hand retrieve needs across the current 25–80 size range

Key Features

• Quick Shift II 2-speed system
• Full-metal body and sideplate construction
• One-piece frame with palm sideplate for rigidity and reduced weight
• Pull-to-Turn preset drag adjustment
• Dura-Drag washers for smooth, consistent pressure
• Stainless steel main and pinion gears
• Five shielded stainless steel ball bearings
• Double-dog ratchet anti-reverse
• Line-capacity rings for quick visual reference
• Removable top spacer bar and lugs on 60 and 80 sizes only
• Some models do not include rod clamps

Models & Specs

These are the current selectable variants. Use the exact model code when comparing capacity, retrieve direction, and drag range.

Mono capacity highlights: The 25NLD2 and 25NLD2LH list 330/20, 300/25, or 245/30. The 30LD2 and 30LD2LH list 405/25, 330/30, or 255/40. The 40NLD2 models list 410/30, 315/40, or 235/50, while the 60NLD2 and 80LD2 extend into heavier line classes.

Choose the Right Current Model

Choose the 25NLD2 or 25NLD2LH for a compact heavy-duty option with right- or left-hand retrieve. Move to the 30LD2 or 30LD2LH for more line capacity while keeping the same 33-pound maximum drag. Choose the 40NLD2 or 40NLD2LH when 40 pounds of maximum drag and a faster high gear fit the plan. Step up to the 60NLD2 or 80LD2 when capacity, heavier line, and low-gear control take priority.

Complete the Offshore Setup

Pair this reel with Phenix Black Diamond Conventional Rods for a purpose-built conventional outfit. If you want a similar Penn platform without the two-speed system, compare the Penn Fathom II Single Speed Lever Drag Reels. For a different retrieve style, see the Penn Fathom II Star Drag Reels.

Tackle Express Tips

• Set the preset drag before the bite, then use the lever for controlled adjustments rather than making large changes mid-fight.
• Use high gear to pick up slack and low gear when the fish turns heavy or the fight moves deep.
• Match line class and capacity to the target, and verify handle direction before adding the reel to your rig.

Frequently Asked Questions

What is the benefit of the 2-speed system?
It lets you switch between a faster retrieve for line pickup and a lower gear for added cranking control during a heavy fight.

Which current sizes are available?
The selectable variants on this listing are 25NLD2, 25NLD2LH, 30LD2, 30LD2LH, 40NLD2, 40NLD2LH, 60NLD2, and 80LD2.

Do all models include a rod clamp?
No. The product specifications note that some models do not include rod clamps, so check the exact model before ordering.

Shimano SpeedMaster II 2-Speed Lever Drag Reels give offshore anglers a practical way to switch from fast line pickup to low-gear cranking power. With an all-metal body, carbon drag, four bearings, and two-speed gearing, this family is built for deep-water bottom fishing, light trolling, and yellowtail or tuna trips where pressure and control matter.

Choose from six listed sizes: 8 II, 10 II, 12 II, 16 II, 20 II, and 25 II. The smaller sizes keep a lighter profile for nearshore work, while the larger models add line capacity and higher maximum drag for deeper water and bigger fish. Confirmed technical rows for SPM12II through SPM25II are shown below; the 8 II and 10 II variants are available, but corresponding technical values were not included in the supplied specification data.

Why Two Speeds Earn Their Keep

Use the high gear when you need quick line pickup, then shift into low gear when a fish gets deep and every turn of the handle needs more leverage. The lever drag gives you a repeatable way to manage pressure during the fight. The trade-off is extra weight and a more involved reel than a single-speed model, but that added control pays off when deep-water cranking power matters.

Built for the Work Offshore Demands

Models & Confirmed Specifications

The values below are listed by model, not price, so you can compare the reel to your line plan and target species.

Monofilament Line Capacity

Capacities are shown as pounds/yards.

PowerPro Braid Line Capacity

Capacities are shown as pounds/yards.

The Right Pick If...

• You want one conventional reel family for deep-water bottom fishing and light trolling.
• You want low-gear leverage for bigger fish without giving up fast pickup in high gear.
• You are comparing yellowtail and tuna setups and need to match reel size to line capacity.
• You prefer a rigid metal-bodied reel with lever-drag control over a lighter single-speed design.

Best Techniques & Conditions

The SpeedMaster II is a strong fit for nearshore and offshore trips, especially deep-water bottom fishing and light trolling. Use high gear when you need to recover line quickly, and shift to low gear when depth, current, or a hard-running fish makes each crank count. For yellowtail or tuna, compare the capacity tables with your planned mono or PowerPro braid before choosing a size.

Tackle Express Tips

• Plan the spool first: Start with the line capacity table, then choose the smallest model that gives you the reserve you need.
• Use the gears with purpose: High gear is for pickup; low gear is for controlled pressure and deep-water cranking.
• Match the rod: Pair the reel with a conventional rod rated for your line class and technique rather than choosing by reel size alone.

Frequently Asked Questions

Is the Shimano SpeedMaster II a two-speed reel?

Yes. The family uses high and low gear ratios, with the exact ratios varying by model. SPM12II and SPM16II are listed at 5.7:1 / 3.1:1, while SPM20II and SPM25II are listed at 5.2:1 / 2.3:1.

Which SpeedMaster II size should I choose?

Choose based on your target line plan, depth, and fish size. The SPM12II and SPM16II are lighter and list 40 pounds of maximum drag, while the SPM20II and SPM25II provide more listed capacity and 44 pounds of maximum drag.

What line can I spool on these reels?

The confirmed tables above include both monofilament and PowerPro braid capacities for SPM12II, SPM16II, SPM20II, and SPM25II. The 8 II and 10 II variants are available, but their corresponding line-capacity values were not included in the supplied specifications.

Complete the Setup

For a bait-fishing setup, pair your reel with Shimano Teramar West Coast Inshore Casting Rods. For vertical jigging, compare it with Shimano Grappler Type J Conventional Jigging Rods. You can also compare the full Shimano Conventional Reels collection or read the complete Shimano Conventional Reels Buyer's Guide.

More Drag and Spool Room Without the Bulk

The Avet MXL Raptor Series 2-Speed Lever Drag Reel combines the MXL's wider spool profile with serious Raptor drag power. Its dual Avedrag carbon fiber system delivers up to 21 lb of drag at strike and 31 lb at full, while the 6.4:1 high gear and 3.8:1 low gear give you fast line pickup and low-gear leverage in the same reel.

Built around a true one-piece 6061-T6 marine-grade aluminum frame, the MXL Raptor is designed for anglers who want a compact, comfortable reel with more line capacity than the narrower MXJ platform. Five magnetic MC Cast Control settings help manage the spool when casting, and the lineup includes right-hand models plus a left-hand Silver option. This reel is made in the USA.

When Compact Is Good, but More Capacity Is Better

The narrow MXJ profile is excellent for palmability, but some trips call for a wider spool and more room on the reel. The MXL Raptor fills that middle ground with a compact frame, higher listed drag output, and a wider spool than the MXJ. It is a practical choice for anglers chasing yellowtail, tuna, white seabass, and other hard-pulling saltwater gamefish where line control and sustained pressure matter.

Two Gears for Speed and Leverage

Use high gear to recover line quickly when a fish runs toward the boat or when you need to stay connected during a fast change of direction. Shift into low gear when the fish digs deep, current adds resistance, or you need controlled cranking power near structure. The lever drag gives you quick, repeatable pressure adjustments during the fight.

The Right Pick If...

• You want more spool room than the narrower MXJ platform while keeping a manageable reel profile.
• You need up to 21 lb at strike and 31 lb at full from a dual carbon fiber drag system.
• You fish for tuna, yellowtail, white seabass, and other demanding saltwater species.
• You want MC cast control with five magnetic settings.
• You prefer right-hand color choices or the listed left-hand Silver configuration.

Where It Fits in the Avet Lineup

The MXL Raptor is the wider-spool 2-speed choice for anglers who want more capacity context than the MXJ. For the narrower profile with the same listed 17 lb strike / 26 lb full drag range, compare the Avet MXJ Raptor. For the compact SX platform, see the Avet SX Raptor. If you want a single-speed G2 version of the MXL platform, compare the Avet G2 MXL Single Speed.

Best Techniques and Conditions

• Offshore live bait: Use high gear to recover line during a fast run, then move to low gear when you need steady pressure and leverage.
• Jigging and casting: Tune the five-position MC system for your lure, line, and casting conditions, then use the two-speed drivetrain after the hookset.
• Inshore to mid-range offshore fishing: The wider spool and compact frame make the MXL a versatile choice when you want more capacity without jumping to a much larger reel.
• Structure-oriented saltwater fishing: The stronger listed drag range and low gear help you keep pressure on fish trying to turn toward cover.

Choose the MXL Raptor when the trip calls for more spool room, a higher drag ceiling, and the ability to switch between speed and torque.

Key Features

• Dual Avedrag carbon fiber drag: Up to 21 lb at strike and 31 lb at full.
• 2-speed gearing: 6.4:1 high gear and 3.8:1 low gear.
• Wider MXL spool: More line capacity context than the narrower MXJ platform while maintaining a compact frame.
• MC Cast Control: Five magnetic settings for spool control.
• One-piece 6061-T6 aluminum frame: Precision-machined for strength and corrosion resistance.
• Machined stainless steel gears and silent anti-reverse: Smooth, confident cranking under load.
• Lever drag with strike preset: Make repeatable pressure adjustments during the fight.
• Included accessories: Matching machined aluminum rod clamp, alarm clicker, and large soft-touch handle knob.
• Hard-anodized finish: Added protection for saltwater use.
• Made in USA.

Models & Specs

Available models and SKUs

Tackle Express Tips

• Use high gear while a fish is moving toward the boat, then shift to low gear when you need more torque and a steadier pace.
• Start with a moderate MC setting and fine-tune it for your lure, line, and casting conditions. Small changes are easier to manage than over-tightening the spool.
• Set the strike position before the trip and keep lever movement smooth so you can return to a familiar pressure setting during the fight.

FAQ

Does the Avet MXL Raptor come in left-hand retrieve?
Yes. The listed lineup includes a left-hand Silver model, along with right-hand models in Silver, Blue, Black, and Gunmetal.

What is the difference between the MXL Raptor and MXJ Raptor?
The MXL uses a wider spool profile and is listed with up to 21 lb at strike and 31 lb at full. The MXJ uses a narrower profile and is listed with up to 17 lb at strike and 26 lb at full. Compare the MXJ Raptor if a narrower setup is the better fit.

How do I compare Avet reel sizes and series?
Our Avet Reels Buyer’s Guide walks through the lineup so you can match reel size, retrieve, gear setup, and fishing application.

Complete the Setup

Protect the finish between trips with the Avet Reel Cover. For replacement or color-matched hardware, see the Avet Reel Clamp Kits. If you need more two-speed drag output on a larger MXL platform, compare the Avet MXL 6/3 Raptor Plus MC.

Mid-Frame Raptor Power for Bigger Offshore Fish

The Avet LX Raptor 2-Speed Lever Drag Reel steps up from the MXL with a higher listed drag range and a mid-frame platform built for serious offshore work. Its dual Avedrag carbon fiber system delivers up to 28 lb of drag at strike and 38 lb at full, while the 6.3:1 high gear and 3.0:1 low gear give you both fast line pickup and heavy-fish cranking power.

Built around a true one-piece 6061-T6 marine-grade aluminum frame, the LX Raptor is designed to stay solid when a larger tuna, yellowtail, or other offshore gamefish turns the fight into a pressure test. The listed models use MC cast control with five magnetic settings and include right-hand color choices plus a left-hand Silver option. Made in the USA.

When the MXL Is Not Quite Enough

The LX Raptor is for anglers who want more authority than a compact MXL platform without jumping straight to the largest reel in the Avet lineup. The higher listed drag ceiling and mid-frame size give you more room to stay in control when a fish runs hard, uses current, or heads for structure. It is a confident choice for larger offshore targets and demanding saltwater conditions.

Speed When You Need It, Leverage When You Need More

Use high gear to recover line quickly when a fish runs toward the boat or changes direction. Shift into low gear when the fish sounds, the water gets heavy, or you need steady torque to turn it. The lever drag gives you fast, repeatable pressure adjustments, while MC cast control helps manage the spool before the hookset.

The Right Pick If...

• You want a mid-frame 2-speed reel with up to 28 lb at strike and 38 lb at full.
• You fish for larger tuna, yellowtail, and other hard-pulling offshore gamefish.
• You want a wider step up from the MXL with high- and low-gear control.
• You prefer MC cast control with five magnetic settings.
• You need right-hand color options or the listed left-hand Silver model.

Where It Fits in the Avet Lineup

The LX Raptor is the mid-frame step up for anglers who want more drag authority than the MXL. For a more compact platform with a lower listed drag range, compare the Avet MXL Raptor. For an ultra-compact option, see the Avet SX Raptor. If you want even more offshore-focused capacity and power, compare the Avet MXL 6/3 Raptor Plus MC.

Best Techniques and Conditions

• Offshore live bait: Use high gear to recover line during a fast run, then shift to low gear when you need steady pressure.
• Jigging: High gear helps work and recover a presentation, while low gear gives you more leverage after the hookset.
• Structure-oriented saltwater fishing: The higher listed drag range and low gear help you keep pressure on fish trying to turn toward cover.
• Big-game offshore trips: Choose the LX when a compact reel is not enough and a mid-frame setup is the better balance.

The LX Raptor is built for anglers who want a serious offshore reel that can move quickly, slow down under load, and stay comfortable enough to fish all day.

Key Features

• Dual Avedrag carbon fiber drag: Up to 28 lb at strike and 38 lb at full.
• 2-speed gearing: 6.3:1 high gear and 3.0:1 low gear.
• MC Cast Control: Five magnetic settings on the listed MC models.
• One-piece 6061-T6 aluminum frame: Precision-machined for strength and corrosion resistance.
• Raptor bearing package: Nine stainless steel ball bearings.
• Machined stainless steel gears and silent anti-reverse: Confident cranking under load.
• Lever drag with strike preset: Make repeatable pressure adjustments during the fight.
• Included accessories: Matching machined aluminum rod clamp, alarm clicker, and large soft-touch handle knob.
• Hard-anodized finish: Added protection for saltwater use.
• Made in USA.

Models & Specs

Available models and SKUs

Tackle Express Tips

• Use high gear while a fish is moving toward the boat, then shift to low gear when you need maximum torque.
• Start with a moderate MC setting and fine-tune it for your lure, line, and casting conditions instead of over-tightening the spool.
• Set your strike position before the trip and use smooth lever movement so you can return to a familiar pressure setting during the fight.

FAQ

Does the Avet LX Raptor come in left-hand retrieve?
Yes. The listed lineup includes a left-hand Silver model, along with right-hand Gunmetal, Blue, Black, Silver, and Gold models.

What is the difference between the LX Raptor and MXL Raptor?
The LX is the larger mid-frame step up, with up to 28 lb at strike and 38 lb at full. The MXL is a more compact platform with a lower listed drag range. Compare the MXL Raptor if you want a smaller setup.

How do I compare Avet reel sizes and series?
Our Avet Reels Buyer’s Guide walks through reel sizes, retrieve options, gear setups, and fishing applications.

Complete the Setup

Protect the finish between trips with the Avet Reel Cover. For replacement or color-matched hardware, see the Avet Reel Clamp Kits. When you need more offshore power and capacity, compare the Avet MXL 6/3 Raptor Plus MC.

Compact Size, Raptor-Level Stopping Power

The Avet SX Raptor Series 2-Speed Lever Drag Reel gives anglers a compact platform with the drag strength and gear control to handle serious saltwater fights. Its dual Avedrag carbon fiber system delivers up to 17 lb of drag at strike and 26 lb at full, while the 6.4:1 high gear and 3.8:1 low gear let you move quickly when a fish runs and lean on it when the fight gets heavy.

Built around a true one-piece 6061-T6 marine-grade aluminum frame, the SX Raptor feels solid in hand without turning a long day offshore into a workout. The MC Cast Control System adds five magnetic settings for more controlled spool management, and the reel is machined and assembled in the USA.

When a Compact Reel Needs More Muscle

Standard compact reels can be easy to fish but run out of authority when a strong fish changes direction or heads for structure. The SX Raptor solves that gap with a compact footprint, a powerful dual carbon drag, and a second gear for controlled pressure. You get the comfort of a small reel without giving up the leverage needed for yellowtail, white seabass, and other demanding saltwater applications.

Two Gears for the Whole Fight

Use high gear to pick up line quickly, work a lure, or stay connected during a fast run. Shift into low gear when you need torque at the rod tip, especially near structure or when a heavy fish refuses to come up. The lever drag gives you quick, repeatable pressure changes without taking your attention away from the fight.

The Right Pick If...

• You want a compact conventional reel with serious drag output.
• You fish saltwater for yellowtail, white seabass, and similar hard-pulling gamefish.
• You want MC cast control for more predictable spool management when casting.
• You prefer a 2-speed reel that can switch from fast line pickup to low-gear power.
• You want a USA-made Avet reel with a machined aluminum frame and included rod clamp.

Where It Fits in the Avet Lineup

The SX Raptor is the compact 2-speed choice in this group. If you want a single-speed version with the latest compact G2 platform, compare it with the Avet G2 SX Series. If you want the similar compact SXJ frame with right- or left-hand options, see the Avet SXJ Raptor. For a larger Raptor platform with more line capacity, step up to the Avet MXL Raptor.

Best Techniques and Conditions

• Offshore live bait: Use high gear to keep line tight during fast runs, then shift to low gear when the fish digs deep.
• Jigging and surface presentations: The compact frame and MC cast control help keep the setup manageable while the 2-speed system gives you options once a fish eats.
• Structure-oriented saltwater fishing: The dual carbon drag and low gear provide extra control when you need to turn a fish away from cover.

Choose the SX Raptor for saltwater trips where a compact reel, controlled casting, and a high-power drag system matter more than maximum spool volume.

Key Features

• Dual Avedrag carbon fiber drag: Up to 17 lb at strike and 26 lb at full.
• 2-speed gearing: 6.4:1 high gear and 3.8:1 low gear.
• MC Cast Control: Five magnetic settings for spool control.
• One-piece 6061-T6 aluminum frame: Precision-machined for strength and corrosion resistance.
• Raptor bearing package: Nine stainless steel ball bearings.
• Machined stainless steel gears and silent anti-reverse: Built for smooth, confident cranking.
• Lever drag with strike preset: Make repeatable pressure adjustments during the fight.
• Included accessories: Matching machined aluminum rod clamp, alarm clicker, and large soft-touch handle knob.
• Hard-anodized finish: Added protection for saltwater use.
• Made in USA.

Models & Specs

Available models and SKUs

Tackle Express Tips

• Start in high gear when a fish is moving toward the boat, then shift to low gear as soon as you need extra torque.
• Use the MC dial to fine-tune spool control for your lure, line, and casting conditions. Make small adjustments rather than jumping straight to maximum tension.
• Set your strike position before the trip and keep the lever movement smooth. The preset makes it easier to return to a familiar pressure setting.

FAQ

Is the Avet SX Raptor left-hand retrieve?
The listed SX Raptor models are right-hand retrieve.

What is the difference between the SX Raptor and the SXJ Raptor?
Both are compact 2-speed Raptor reels with the same listed 6.4:1 / 3.8:1 gearing and 17 lb strike / 26 lb full drag. The SXJ listing adds a left-hand Silver option, while the SX listing is right-hand only. Compare the SXJ Raptor models before choosing your retrieve.

How do I choose between Avet reel series?
Use our Avet Reels Buyer’s Guide to compare compact, larger-capacity, single-speed, and multi-speed options.

Complete the Setup

Protect the finish between trips with the Avet Reel Cover, or add replacement and color-matched hardware with the Avet Reel Clamp Kits. When you need a larger spool and more line capacity, the Avet MXL Raptor is the natural next step.

Mid-Frame Power for Serious Offshore Fights

The Avet HX Raptor 2-Speed Lever Drag Reel is the standard-width choice in the HX family, balancing a substantial frame with the control of a 2-speed drivetrain. Its dual Avedrag carbon fiber system delivers up to 40 lb of drag at strike and 50 lb at full, while the 5.4:1 high gear and 1.9:1 low gear give you speed for line recovery and torque for the heavy part of the fight.

Built around a true one-piece 6061-T6 marine-grade aluminum frame, the HX Raptor is made for anglers targeting larger tuna, yellowtail, and other hard-pulling offshore gamefish. The lineup includes MC and no-MC configurations, right-hand color options, and a left-hand Silver MC model. Made in the USA.

When a Smaller Reel Leaves You Short

Compact reels are comfortable, but bigger offshore fish can expose their limits quickly. The HX Raptor gives you a wider standard HX platform, a higher listed drag range, and an 80 lb braid capacity of up to 500 yards in the current product specifications. It is a strong middle ground when you need serious stopping power without moving to the wider HXW platform.

Fast Recovery, Heavy-Gear Leverage

Use high gear when a fish runs toward the boat or you need to remove slack quickly. Shift to low gear when the fish sounds, current loads the line, or you need steady pressure near structure. The lever drag and strike preset keep pressure changes deliberate and repeatable, while MC models add five magnetic settings for spool control before the hookset.

The Right Pick If...

• You want a standard-width HX platform with up to 40 lb at strike and 50 lb at full.
• You fish for larger tuna, yellowtail, and other demanding offshore gamefish.
• You need the listed 80 lb braid capacity of up to 500 yards.
• You want to choose between MC and no-MC configurations.
• You need right-hand color choices or the listed left-hand Silver MC model.

Where It Fits in the Avet Lineup

The HX Raptor is the standard-width option in the HX family. For a more compact mid-frame reel, compare the Avet LX Raptor. For a narrower HXJ setup, see the Avet HXJ Raptor. If you need the wider spool and larger HXW platform, compare the Avet HXW Raptor.

Best Techniques and Conditions

• Offshore live bait: Use high gear to recover line during a fast run, then shift low when the fish digs deep.
• Heavy jigging: High gear helps with lure work and line pickup, while low gear gives you leverage after the hookset.
• Structure-oriented saltwater fishing: The 40/50 lb listed drag range helps you maintain pressure when a fish turns toward cover.
• Long-range and offshore trips: The standard-width frame and 80 lb/500 yd capacity make the HX a practical step up from smaller Raptor platforms.

Choose the HX Raptor when you need serious drag power, a useful line-capacity target, and two-speed control in a standard-width offshore reel.

Key Features

• Dual Avedrag carbon fiber drag: Up to 40 lb at strike and 50 lb at full.
• 2-speed gearing: 5.4:1 high gear and 1.9:1 low gear.
• 80 lb braid capacity: Listed up to 500 yards.
• MC and no-MC options: Choose the spool-control setup that fits your fishing.
• One-piece 6061-T6 aluminum frame: Precision-machined for strength and corrosion resistance.
• Raptor bearing package: Nine stainless steel ball bearings.
• Machined stainless steel gears and silent anti-reverse: Confident cranking under load.
• Lever drag with strike preset: Repeatable pressure control during the fight.
• Included accessories: Matching machined aluminum rod clamp, alarm clicker, and large soft-touch handle knob.
• Hard-anodized finish.
• Made in USA.

Models & Specs

Available models and SKUs

Tackle Express Tips

• Use high gear while a fish is moving toward the boat, then shift to low gear when you need steady torque.
• Choose No-MC for a simpler configuration or MC when you want five magnetic spool-control settings.
• Set the strike position before the trip and keep lever movement smooth so pressure changes stay predictable.

FAQ

What is the difference between the HX and HXJ Raptor?
The HX is the standard-width platform with the listed 80 lb/500 yd capacity. The HXJ uses a narrower platform and is listed separately for anglers who prefer that profile. Compare the HXJ Raptor before choosing.

Does the HX Raptor come in left-hand retrieve?
Yes. The listed lineup includes a left-hand Silver MC model, along with right-hand Silver, Blue, Black, Gold, and Gunmetal choices.

How do I compare Avet reel sizes?
Our Avet Reels Buyer’s Guide walks through reel sizes, retrieve options, gear setups, and fishing applications.

Complete the Setup

Protect the reel between trips with the Avet Reel Cover. For replacement or color-matched hardware, see the Avet Reel Clamp Kits. If you need a wider platform and more line room, compare the Avet HXW Raptor.

Narrow-Spool Raptor Power for Versatile Offshore Fishing

The Avet JX Raptor 2-Speed Lever Drag Reel combines a taller, narrower JX spool with the extra authority of Avet’s Raptor dual carbon fiber drag system. With up to 28 lb at strike and 38 lb at full, plus 6.3:1 high and 3.8:1 low gears, it gives you the speed to recover line and the leverage to stay in control when a fish turns deep.

When a yellowtail, tuna, or other hard-pulling fish changes direction near the boat, the JX Raptor’s narrow profile and two-speed control help you keep the reel comfortable and the fight organized. MC cast control with five magnetic settings makes casting more manageable, while the one-piece 6061-T6 marine-grade aluminum frame and nine stainless steel bearings are built for demanding saltwater use. Available in right- and left-hand retrieve. Made in the USA.

Why the Narrow JX Profile Works

The JX spool is taller and narrower than the more compact MX-style platform, which helps with line management and increases retrieve efficiency. That makes the JX Raptor a strong all-rounder for anglers who move between casting, live bait, vertical jigging, and deep drops instead of fishing only one presentation.

High Gear to Chase, Low Gear to Turn

• 6.3:1 high gear: Recover line quickly when a fish runs toward the boat or when a lure needs a faster retrieve.
• 3.8:1 low gear: Add cranking leverage when a fish circles, sounds, or pulls against heavy current.
• Raptor dual carbon fiber drag: Apply smooth, consistent pressure through a long fight.
• MC cast control: Use five magnetic settings to manage spool speed and casting control.

The Right Pick If...

• You target yellowtail, tuna, and other mid-range to hard-pulling saltwater species.
• You want a narrow-spool reel with 2-speed control for both casting and vertical fishing.
• You need more listed drag authority than the standard JX platform provides.
• You prefer MC cast control, right- or left-hand retrieve, and a USA-made reel.
• You want a reel that sits between compact MX-style options and larger offshore platforms.

Best Techniques and Conditions

• Live-bait fishing: Use MC control to manage the cast, then use high gear to recover line when a fish changes direction.
• Vertical jigging: Work the presentation in high gear and shift low when a fish turns the hookup into a heavy pull.
• Deep drops: Use the taller spool and low gear to maintain steady pressure as fish move below the boat.
• Nearshore and offshore saltwater: The hard-anodized aluminum frame and stainless steel components suit regular saltwater use.

Where It Fits in the Avet Lineup

The JX Raptor is the narrow-spool, 2-speed Raptor choice with MC cast control and a 28/38 lb listed drag range. For a G2 JX platform with a more moderate 21/28 lb drag range, compare the Avet JX G2. For a more compact Raptor platform, see the Avet MXL Raptor. For a larger narrow-frame option, compare the Avet HXJ Raptor.

Key Features

• Dual Avedrag carbon fiber drag: Up to 28 lb at strike and 38 lb at full.
• 2-speed gearing: 6.3:1 high and 3.8:1 low.
• MC Cast Control: Five magnetic settings for casting spool control.
• Narrow JX spool: Designed for efficient retrieve and easier line management.
• 9 stainless steel ball bearings: Raptor-series bearing package.
• One-piece 6061-T6 marine-grade aluminum frame: Rigid, precision-machined construction.
• Precision-machined stainless steel gears: Built for cranking under load.
• Silent dog-and-gear anti-reverse: Confident control during the fight.
• Offset machined handle arm: Reduces centerline profile and cranking wobble.
• Included hardware: Large soft-touch handle knob, alarm clicker, and matching machined aluminum rod clamp.
• Hard-anodized finish and USA-made construction.

Models & Specs

Available models and SKUs

Tackle Express Tips

• Start with a moderate MC setting and adjust it to your lure, line, and casting conditions.
• Use high gear to recover line, then shift low before a deep-running fish turns the fight into a leverage test.
• Set the strike position before the trip so pressure changes remain smooth and repeatable.

FAQ

How much drag does the Avet JX Raptor provide?
The listed specification is up to 28 lb at strike and 38 lb at full.

What is the difference between the JX Raptor and JX G2?
The JX Raptor uses the Raptor dual carbon fiber drag system and lists 28/38 lb drag. The JX G2 lists 21/28 lb drag and is a strong choice when you want a more moderate platform for versatile mid-range fishing.

Does the JX Raptor come in left-hand retrieve?
Yes. The listed lineup includes a left-hand Silver model, along with right-hand Blue, Black, Silver, Red, and Gunmetal models.

Complete the Setup

Keep the reel protected between trips with the Avet Reel Bags, and check replacement hardware with the Avet Reel Clamp Kits. For a broader size and technique comparison, use the Avet Reels Buyer’s Guide.

Narrow-Spool Control with Raptor-Level Power

The Avet MXJ Raptor Series 2-Speed Lever Drag Reel gives saltwater anglers a narrow MXJ spool profile, powerful dual Avedrag carbon fiber drag, and the flexibility of two gear ratios in one compact setup. It delivers up to 17 lb of drag at strike and 26 lb at full, with a 6.4:1 high gear for fast line pickup and a 3.8:1 low gear for controlled cranking power.

The redesigned true one-piece 6061-T6 marine-grade aluminum frame feels rigid and dependable under load, while five magnetic MC Cast Control settings help you manage the spool when casting. Choose from right-hand models in Silver, Black, Blue, Gunmetal, or Gold, or the listed Silver left-hand model. The MXJ Raptor is made in the USA.

Why a Narrow Spool Makes a Difference

A reel can have plenty of drag and still feel awkward if the spool is difficult to manage. The MXJ profile keeps the reel comfortable to palm and helps keep line handling close to the center of the setup. When a fish changes direction, the dual carbon drag and two-speed drivetrain give you a practical way to stay connected, recover line, and apply steady pressure without reaching for a different reel.

Change Gears When the Fight Changes

High gear is useful when a fish runs toward the boat or you need to quickly remove slack. Low gear gives you more leverage when the fish digs deep, current adds resistance, or you need to turn a fish away from structure. The lever drag, ratcheting glide plate, and strike stop button make it easier to return to a familiar setting and keep your attention on the fight.

The Right Pick If...

• You want a narrow-profile conventional reel with serious saltwater drag output.
• You fish for yellowtail, white seabass, and other hard-pulling gamefish.
• You want MC cast control with five magnetic settings for spool management.
• You prefer a 2-speed reel that can move from fast line pickup to low-gear pressure.
• You want right-hand color choices or the listed left-hand Silver configuration.

Where It Fits in the Avet Lineup

The MXJ Raptor is the narrow-spool 2-speed choice in this lineup. For the compact SX platform with the same listed 17 lb strike / 26 lb full drag range, compare the Avet SX Raptor. If you want a similar compact reel with a left-hand Silver option and the SXJ frame, see the Avet SXJ Raptor. If you need a larger Raptor platform with higher listed drag output, step up to the Avet MXL Raptor.

Best Techniques and Conditions

• Offshore live bait: Start in high gear to recover line during a fast run, then shift to low gear when you need steady pressure.
• Jigging and casting: Use the five-position MC system to tune spool control for your lure, line, and casting conditions.
• Structure-oriented saltwater fishing: The narrow profile keeps the reel manageable while the dual drag and low gear help you stay in control close to cover.

The MXJ Raptor is at home on saltwater trips where compact handling, controlled casting, and 2-speed flexibility matter more than a bulky reel profile.

Key Features

• Dual Avedrag carbon fiber drag: Up to 17 lb at strike and 26 lb at full.
• 2-speed gearing: 6.4:1 high gear and 3.8:1 low gear.
• Narrow MXJ spool profile: Keeps line handling compact and comfortable in hand.
• MC Cast Control: Five magnetic settings for more predictable spool management.
• Redesigned one-piece 6061-T6 aluminum frame: Precision-machined for strength and corrosion resistance.
• Redesigned silent dog-and-gear anti-reverse: More engagement teeth help reduce handle back-play.
• Machined stainless steel gears: Built for smooth cranking under load.
• Lever drag controls: Adjustable strike preset, ratcheting glide plate, and strike stop button.
• Included accessories: Matching machined aluminum rod clamp, loud alarm clicker, and large soft-touch handle knob.
• Hard-anodized finish: Added protection for saltwater use.
• Made in USA.

Models & Specs

Available models and SKUs

Tackle Express Tips

• Use high gear when a fish is moving toward you, then shift to low gear when you need extra torque and a steadier pace.
• Begin with a moderate MC setting and fine-tune it for your lure, line, and casting conditions. Small adjustments are easier to manage than over-tightening the spool.
• Set the strike position before the trip and use the glide plate and strike stop as repeatable reference points during the fight.

FAQ

Does the Avet MXJ Raptor come in left-hand retrieve?
Yes. The listed lineup includes a left-hand Silver model, along with right-hand models in Silver, Black, Blue, Gunmetal, and Gold.

What is the difference between the MXJ Raptor and MXL Raptor?
The MXJ uses the narrower MXJ spool profile and is listed with up to 26 lb of full drag. The MXL is a larger platform with higher listed drag output and more line capacity context. Compare the MXL Raptor if you need the larger reel platform.

How do I compare Avet reel sizes and series?
Our Avet Reels Buyer’s Guide walks through the lineup so you can match reel size, retrieve, gear setup, and fishing application.

Complete the Setup

Protect the finish between trips with the Avet Reel Cover. For replacement or color-matched hardware, see the Avet Reel Clamp Kits. If your next trip calls for more drag and a larger Raptor platform, compare the Avet MXL Raptor.

Shimano Talica A Two-Speed Lever Drag Reels are built for the moment a strong fish sounds and a single-speed reel runs out of answers. Push-button shifting gives you high-gear line pickup when a tuna runs toward the boat, then low-gear leverage when the fight turns deep and heavy.

The six-size lineup covers SoCal bait fishing, yo-yo iron, sinker rigs, flat-fall and knife jigs, kite fishing, trolling, and long-range saltwater. Match the reel to the line class you actually fish, then use the size guide below to choose the capacity you need.

Two Speeds for the Part of the Fight That Gets Hard

High gear helps you recover line quickly, work a surface iron, and stay connected when a fish changes direction. Low gear gives you more leverage after a fish sounds under the boat. You can shift under load without backing off the drag, which is the advantage that separates this family from a single-speed conventional reel.

What the Talica A Redesign Adds

Models & Size Guide

All six listed sizes are right-hand retrieve. Use the size, line-class, and technique guidance together rather than choosing by fish name alone.

Line Capacity Reference

The following PowerPro capacity figures are confirmed in the current listing. Capacities are shown as line weight/yards.

Best Species, Techniques & Conditions

• Bluefin and yellowtail: Sinker rigs, flylined sardines or mackerel, and yo-yo iron.
• Deep-water jigging: Flat-fall and knife jigs around 200–400 feet, especially with the 20IIA and 25IIA.
• Kite and trolling work: The 25IIA, 40IIA, and 50IIA for heavier offshore presentations.
• Trips: Catalina and Channel Islands runs, 1.5-day and long-range boats, private sportfishers, and Baja saltwater trips.

The Right Pick If...

• You want both fast line pickup and low-gear cranking leverage.
• You fish bluefin on a sinker rig and need a reel that can handle the turn from open water to deep pressure.
• You want a 12IIA or 16IIA for lighter tuna and yellowtail work, or a 20IIA and up for heavier long-range applications.
• You prefer a lever drag with an included light-line cam for more gradual pressure on lighter line.

Tackle Express Tips

• Set strike drag with a scale: Roughly one-third of your topshot's rated breaking strength is a sensible starting point for bait fishing.
• Shift before you are exhausted: Move to low gear when the fish stops running and starts circling, rather than waiting until the rod is fully loaded.
• Protect the reel after the trip: Rinse with low-pressure fresh water, back the lever off for storage, and service the two-speed mechanism regularly.

Frequently Asked Questions

What Talica A size is best for bluefin tuna?

The 20IIA is the lineup's practical starting point for many bluefin sinker-rig applications. The 25IIA adds more 65 lb. PowerPro capacity for longer-range work, while the 12IIA and 16IIA fit lighter 30 lb. class fishing.

What is the difference between the Talica A and older Talica II?

The A series adds Infinity Drive, Cross Carbon Drag, X-Protect water resistance, and an included Light-Line Drag Cam. It is a mechanical redesign rather than a cosmetic update.

Is the Talica A available in left-hand retrieve?

No. All six listed Talica A sizes are right-hand retrieve.

Complete the Setup

Protect the reel with Shimano Talica Reel Covers, or add leverage with the Shimano Talica-A T-Bar Handle Replacement. For line and terminal tackle, browse PowerPro and Seaguar. For the wider comparison, see the Shimano SpeedMaster II, Shimano Conventional Reels collection, or Shimano Conventional Reels Buyer's Guide.

Compact Raptor Power with More Retrieve Choices

The Avet SXJ Raptor Series 2-Speed Lever Drag Reel packs a powerful dual Avedrag carbon fiber system into a compact saltwater reel, delivering up to 17 lb of drag at strike and 26 lb at full. Its 6.4:1 high gear helps you pick up line quickly, while the 3.8:1 low gear gives you the torque to stay connected when a hard-pulling fish turns the fight into a grind.

The true one-piece 6061-T6 marine-grade aluminum frame is precision-machined for a solid, corrosion-resistant foundation. Five magnetic MC Cast Control settings help manage the spool when casting, and the lineup includes right-hand models plus a left-hand Silver option. Like the rest of the Raptor family, the SXJ is made in the USA.

More Control When the Fight Gets Heavy

A compact reel is great until a fish makes a hard run, changes direction, or uses current and structure against you. The SXJ Raptor answers with a high-output dual carbon drag, stainless steel gearing, and a second gear for leverage. It keeps the setup manageable in hand while giving you the control needed for yellowtail, white seabass, and similar saltwater applications.

Fast Line Pickup or Low-Gear Leverage

High gear is the move when a fish runs toward the boat, when you need to recover slack quickly, or when you are working a presentation that rewards speed. Low gear takes over when the fish digs deep or you need steady pressure close to structure. The lever drag lets you make controlled adjustments and return to a familiar strike setting.

The Right Pick If...

• You want a compact conventional reel with Raptor-level drag output.
• You fish saltwater for yellowtail, white seabass, and other strong gamefish.
• You want five MC magnetic settings to help manage the spool on the cast.
• You want 2-speed flexibility without moving to a larger reel platform.
• You prefer the choice of right-hand retrieve or the listed left-hand Silver model.

Where It Fits in the Avet Lineup

The SXJ Raptor is the compact 2-speed choice when retrieve options matter. For the standard SX Raptor platform in right-hand models, compare the Avet SX Raptor. If you want a single-speed reel with the newer compact G2 platform, see the Avet G2 SX Series. For a larger Raptor platform with more line capacity, move up to the Avet MXL Raptor.

Best Techniques and Conditions

• Offshore live bait: Use high gear to recover line during a fast run, then shift to low gear for steady pressure when the fish digs in.
• Jigging and casting: The MC system gives you a way to fine-tune spool control, while the 2-speed drivetrain keeps the reel versatile after the hookset.
• Structure-oriented saltwater fishing: The dual drag system and low gear help you keep pressure on a fish that is trying to turn toward cover.

The SXJ is a strong fit for saltwater anglers who want compact handling, controlled casting, and the option to fish right- or left-handed with the listed models.

Key Features

• Dual Avedrag carbon fiber drag: Up to 17 lb at strike and 26 lb at full.
• 2-speed gearing: 6.4:1 high gear and 3.8:1 low gear.
• MC Cast Control: Five magnetic settings for spool control.
• One-piece 6061-T6 aluminum frame: Precision-machined for strength and corrosion resistance.
• Raptor bearing package: Nine stainless steel ball bearings.
• Machined stainless steel gears and silent anti-reverse: Smooth, confident cranking under load.
• Lever drag with strike preset: Make repeatable pressure adjustments during the fight.
• Included accessories: Matching machined aluminum rod clamp, alarm clicker, and large soft-touch handle knob.
• Hard-anodized finish: Added protection for saltwater use.
• Made in USA.

Models & Specs

Available models and SKUs

Tackle Express Tips

• Set your strike position before the trip, then make small, smooth lever adjustments instead of moving straight to maximum pressure.
• Use high gear while a fish is moving toward you. Shift to low gear when you need steady torque and line control.
• Start with a moderate MC setting and fine-tune it for your lure, line, and casting conditions. Small changes are easier to manage than over-tightening the spool.

FAQ

Does the Avet SXJ Raptor come in left-hand retrieve?
Yes. The listed lineup includes a left-hand Silver model, along with right-hand models in Blue, Silver, Red, Gold, and Black.

What is the difference between the SXJ Raptor and SX Raptor?
Both use the listed 6.4:1 / 3.8:1 2-speed gearing, dual carbon drag, MC cast control, and 17 lb strike / 26 lb full drag. The SXJ lineup includes a left-hand Silver option, while the SX listing is right-hand only. Compare the SX Raptor models if you fish right-handed.

How do I compare Avet reel sizes and series?
Our Avet Reels Buyer’s Guide walks through the lineup so you can match reel size, retrieve, gear setup, and fishing application.

Complete the Setup

Keep the reel protected between trips with the Avet Reel Cover. For replacement or color-matched hardware, see the Avet Reel Clamp Kits. If you need more line capacity on a larger Raptor platform, compare the Avet MXL Raptor.

Wide-Profile Two-Speed Power for Trophy Offshore Fish

The Avet HX 5/2 Raptor Plus MC 2 Speed Reel is built for anglers who want wide-profile capacity, serious cranking leverage, and the confidence to stay connected when a trophy fish digs deep. Its 5.0:1 high gear helps recover line and work a presentation, while the 2.4:1 low gear gives you the leverage to keep turning during a long fight.

Picture the moment a big tuna settles into a deep run. The HX 5/2 Raptor Plus MC gives you a solid, controlled platform, a smooth lever drag, and the low-gear authority to keep pressure steady instead of fighting the reel. Precision-machined 6061-T6 aircraft-grade aluminum, stainless steel components, and a multi-color anodized finish make it a purpose-built tool for demanding saltwater work. Made in the USA.

When More Line Capacity and More Leverage Matter

The wide HX profile is the right move when a compact reel does not provide enough room or power for your plan. Choose it for long-range trips, deep-water presentations, and trophy-class tuna or billfish where a fish may take line before you can turn it. The 2-speed system lets you fish fast when the opportunity opens up, then slow down and grind when the fight gets heavy.

Fast Recovery, Heavy-Fish Control

• 5.0:1 high gear: Gain line on running fish and work or recover lures efficiently.
• 2.4:1 low gear: Apply deliberate cranking power when a fish sounds or makes a deep run.
• Smooth shifting: Move between speeds as the fight changes instead of forcing one gear to do everything.
• Lever drag control: Make quick, precise pressure adjustments while keeping your attention on the fish.

The Right Pick If...

• You fish for giant bluefin, yellowfin tuna, marlin, sailfish, or other trophy offshore species.
• You want a wide-profile reel for long-range trips and maximum line capacity.
• You need a 2-speed setup that can move quickly and still deliver low-gear leverage.
• You fish deep-water jigs or heavy tackle for large yellowtail and white seabass.
• You prefer the distinctive MC multi-color anodized finish and a choice of right- or left-hand models.

Best Techniques and Conditions

• Long-range live bait: Use high gear to recover line during a fast run, then shift low when the fish settles into a deep pull.
• Deep-water jigging: The wide profile gives you a serious platform for deep presentations, while the two speeds help manage both retrieve and hookup pressure.
• Heavy offshore bait and trolling: Choose the HX 5/2 when large fish, long runs, and demanding saltwater conditions call for added capacity and leverage.
• Trophy billfish: Keep pressure smooth and deliberate, using low gear when the fish turns into a sustained, heavy fight.

Where It Fits in the Avet Lineup

The HX 5/2 Raptor Plus MC is the wide-profile choice for anglers who prioritize trophy-fish capacity and low-gear power. For a standard HX platform with a more compact profile, compare the Avet HX Raptor 2-Speed Reel. If you want a smaller Raptor setup, see the Avet LX Raptor. For another wide-profile option, compare the Avet HXW Raptor 2-Speed Reel.

Key Features

• Raptor carbon fiber drag system: Smooth, consistent pressure for extended battles.
• 5.0:1 high and 2.4:1 low gears: A practical speed and power combination for trophy fish.
• Wide HX profile: Built to provide maximum line capacity for long-range fishing; exact capacity is not listed in the supplied model details.
• Precision-machined 6061-T6 aluminum: Aircraft-grade construction for strength and durability.
• MC multi-color anodized finish: Corrosion-resistant finish with a distinctive look.
• Stainless steel gears and hardware: Designed for demanding saltwater environments.
• Sealed bearings: Smooth rotation with added corrosion resistance.
• Heat-dissipating drag materials: Helps maintain consistent performance during long fights.
• Made in USA: Manufactured in California with careful quality control.

Models & Specs

Available models and SKUs

Tackle Express Tips

• Use high gear to stay connected when a fish runs toward the boat, then shift to low gear before the fight turns into a heavy, deep pull.
• Set the lever drag at a repeatable strike position before the trip, and make pressure changes smoothly rather than in a rush.
• Match the reel to a rod and line system that can take advantage of its wide-profile capacity and two-speed leverage.

FAQ

What is the difference between the HX 5/2 Raptor Plus MC and a standard HX Raptor?
The HX 5/2 Raptor Plus MC uses a wide HX profile with 5.0:1 high and 2.4:1 low gears, making it a strong fit for anglers prioritizing trophy-fish capacity and low-gear leverage. Compare the standard HX Raptor for a different platform and model lineup.

Does this reel come in left-hand retrieve?
Yes. The listed models include a left-hand Silver option along with right-hand Silver/Red, Black/Red, Silver, Blue, Black, and Gunmetal options.

How do I compare Avet sizes and fishing applications?
Use the Avet Reels Buyer’s Guide for a practical comparison of reel sizes, gear setups, retrieve options, and offshore use cases.

Complete the Setup

For a full Avet comparison, start with the Avet Reels Buyer’s Guide. Protect the reel between trips with the Avet Reel Cover, and compare the Avet HXJ 5/2 Raptor Plus MC when you want to evaluate another Raptor platform.

Narrow-Profile Two-Speed Control for Trophy Fish

The Avet HXJ 5/2 Raptor Plus MC 2 Speed Reel brings Raptor drag performance and two-speed leverage to a narrower platform that is easier to hold and work throughout a long offshore fight. The 5.0:1 high gear helps you recover line and work lures, while the 2.4:1 low gear gives you the steady cranking power needed when a big fish sounds or stays deep.

When the bite turns into an all-day battle, the HXJ profile keeps the reel comfortable in hand without giving up the heavy-duty construction serious saltwater anglers expect. The CNC-machined 6061-T6 aircraft-grade aluminum frame, MC anodized finish, stainless steel gears and hardware, and Raptor carbon fiber drag system are built for bluefin tuna, yellowfin tuna, marlin, sailfish, and other hard-pulling offshore species. Made in California.

Why the Narrow HXJ Profile Earns Its Place

The HXJ is a strong fit when you want big-game capability in a narrower package. Its profile offers a comfortable grip for repeated jig work, live-bait presentations, and extended fights, while the two-speed mechanism lets you change from quick line recovery to deliberate low-gear pressure as conditions change.

Use Speed to Find Line, Then Use Leverage to Keep It

• 5.0:1 high gear: Gain line on running fish and work or recover lures efficiently.
• 2.4:1 low gear: Shift down when a trophy fish sounds or the fight demands more cranking power.
• Raptor carbon drag: Apply smooth, consistent pressure through long battles.
• Lever drag control: Make fast, precise adjustments without taking your focus off the fight.

The Right Pick If...

• You target bluefin tuna, yellowfin tuna, marlin, sailfish, or large yellowtail.
• You want two-speed power in a narrower, more comfortable profile.
• You fish offshore with heavy tackle, live bait, or deep-water jigs.
• You want a corrosion-resistant MC finish and USA-made aluminum construction.
• You need right- or left-hand retrieve options.

Best Techniques and Conditions

• Offshore live bait: Use high gear to pick up slack and stay connected, then move to low gear when the fish settles into a deep run.
• Deep-water jigging: Work and recover the jig in high gear, with low gear ready for the heavy pressure that follows a hookup.
• Long-range tuna trips: The narrow profile is comfortable during extended fishing, while the Raptor drag system is built for serious pressure.
• Heavy saltwater tackle: Stainless steel components and hard-wearing anodized aluminum suit demanding offshore conditions.

Where It Fits in the Avet Lineup

The HXJ 5/2 Raptor Plus MC is the narrow-profile alternative for anglers who want two-speed Raptor performance in a more comfortable package. For a wider platform with trophy-fish capacity as a priority, compare the Avet HX 5/2 Raptor Plus MC. For a standard HX Raptor platform, see the Avet HX Raptor 2-Speed Reel. For another heavy-duty narrow-profile option, compare the Avet HXJ Raptor 2-Speed Reel.

Key Features

• Two-speed gearing: 5.0:1 high and 2.4:1 low.
• Raptor carbon fiber drag: Smooth, consistent pressure under heavy load.
• Narrow HXJ profile: A comfortable grip for extended offshore sessions.
• CNC-machined 6061-T6 aircraft-grade aluminum: Strong, durable frame construction.
• MC anodized finish: Multi-color corrosion-resistant coating.
• Stainless steel gears and hardware: Built for saltwater environments.
• Lever drag: Precise, quick pressure adjustments during the fight.
• Right- and left-hand models: Retrieve options for different anglers.
• Made in USA: Manufactured in California.

Models & Specs

Available models and SKUs

Tackle Express Tips

• Use high gear for line recovery, then shift to low gear before a deep-running fish makes you work against the wrong ratio.
• Set the lever at a repeatable strike position before the trip and make pressure changes gradually during the fight.
• Take advantage of the narrow profile by keeping the reel close and your cranking motion controlled during long battles.

FAQ

What makes the HXJ different from the wider HX 5/2 Raptor Plus MC?
The HXJ uses a narrow profile for a more comfortable grip, while the HX 5/2 Raptor Plus MC uses a wide profile for anglers prioritizing maximum capacity. Both listed models use 5.0:1 high and 2.4:1 low gears.

Does the HXJ 5/2 Raptor Plus MC come in left-hand retrieve?
Yes. The listed lineup includes a left-hand Silver model along with right-hand Silver, Blue, Black, and Gunmetal options.

Where can I compare Avet reel sizes and applications?
Use the Avet Reels Buyer’s Guide for a practical overview of reel sizes, gear setups, retrieve options, and fishing applications.

Complete the Setup

Compare the Avet HXJ Raptor 2-Speed Reel for another narrow-profile option, or protect your reel between trips with the Avet Reel Cover. The Avet Reels Buyer’s Guide is the best place to review the full lineup before matching a reel to your rod and line system.

The Penn International VISX 2-Speed Silver Reel represents the pinnacle of American-made big game fishing excellence. Precision-machined from aircraft-grade aluminum in Penn's historic Philadelphia facility—home to legendary reel craftsmanship since 1932—this reel delivers the power, durability, and performance demanded by serious offshore anglers pursuing trophy fish worldwide.

Engineered with a massive stainless steel gear train and Penn's renowned Dura-Drag™ system, the International VISX provides smooth, reliable performance even under extreme drag settings. The Quick-Shift II™ 2-speed system allows instant transitions between high-speed retrieval and low-gear cranking power, giving you the tactical advantage when battling hard-fighting pelagics.

Every component is built to withstand the punishment of big game fishing, from the machined and anodized aluminum body to the double-dog ratchet anti-reverse. The Versa-Strike adjustable strike stop and line capacity rings provide the precision control needed for kite fishing, live baiting, and trolling applications.

Key Features:

• Made in USA: Precision-machined in Philadelphia from domestic and imported components since 1932
• Aircraft-Grade Aluminum Construction: Machined and anodized body and sideplates for maximum strength and corrosion resistance
• Stainless Steel Gear Train: Oversized main and pinion gears deliver exceptional power and durability
• Quick-Shift II™ 2-Speed System: Instant gear changes between high-speed retrieve and low-gear power
• Dura-Drag™ System: Smooth startup with virtually no hesitation, even at extreme drag settings
• Versa-Strike Adjustable Strike Stop: Precision strike control for kite fishing and live bait applications
• Double-Dog Ratchet Anti-Reverse: Rock-solid hooksets with enhanced durability
• Line Capacity Rings: Visual indicators help monitor remaining line during long battles
• 5 Stainless Steel Bearings: Smooth, corrosion-resistant operation

Available in five sizes (12, 16, 20, 30, 50) to match your target species and fishing style, the Penn International VISX is the choice of charter captains, tournament anglers, and serious big game fishermen who demand the best.

Specifications

Line Capacity

The completely redesigned Daiwa Saltiga LD 2-Speed Lever Drag Conventional Reel delivers the smoothest, most powerful, and most dependable two-speed lever drag platform available for saltwater anglers targeting yellowtail, tuna, white seabass, and big game species from inshore to offshore and the canyons. The two-speed design gives anglers the ability to shift from high gear for fast line recovery to low gear for maximum cranking power when a large fish goes deep or surges toward structure — the critical advantage in the toughest fights. Built on a one-piece machined aluminum frame and side plate with 6CRBB corrosion-resistant bearings, ATD drag, and Digigear precision.

Key Features

• Two-Speed Gear System — High gear for fast line recovery and low gear for maximum cranking power; shift between gear ratios instantly during the fight to match the demands of the fish; critical advantage when large fish go deep or surge toward structure where maximum torque is needed to turn them.
• One-Piece Machined Aluminum Frame & Side Plate — Machined from a single piece of aluminum for precise alignment of bearings and gears; eliminates flex and binding under heavy drag loads; oversized, super-hard, polished and meshed stainless steel main and pinion gears drive the kicking gear with extra strength and nearly silent precision.
• 6CRBB Corrosion-Resistant Ball Bearings — Specially treated stainless steel bearings with a protective shield on the bearing race that seals out sand, fine grit, salt crystals, and other abrasives; lasts 12 times longer than standard stainless steel bearings in saltwater environments.
• ATD (Automatic Tournament Drag) — Improved drag grease with low viscosity at rest that becomes more viscous immediately after drag startup; reduces initial drag startup inertia for a smoother drag from the initial hookup; combined with structural ATD system changes for consistent drag pressure throughout the fight.
• Digigear — Digitally engineered gear design ensures a perfect mesh between ultra-tough alloy drive gears and marine bronze pinion gears; optimized for speed, power, durability, and smoothness across the full gear range.
• Large Spool Bearings — Oversized spool bearings reduce side load so anglers can concentrate on fighting fish rather than managing the reel; contributes to the smooth, powerful retrieve under maximum drag pressure.
• Saltiga Executive 5-Year Warranty & Free Clean/Service — Industry-leading 5-year limited warranty against manufacturing defects plus a free 5-year clean and service for the original owner; expedited return shipping (2nd Day Air or Priority Mail) included.

Product Specifications

Model Selection Guide

• SAGLD15-2SPD / SAGLD20-2SPD — Smaller 2-speed models for inshore to nearshore applications; 15.5/26 lb drag for yellowtail and white seabass on 12–20 lb mono or 30–50 lb braid; 6.3:1 high / 3.1:1 low gear ratios. 18.2–18.8 oz.
• SAGLD35-2SPD / SAGLD40-2SPD — Mid-size 2-speed models for nearshore to offshore applications; 28.6/40 lb drag for yellowtail and tuna on 20–30 lb mono or 65–80 lb braid; 5.8:1 high / 3.1:1 low gear ratios. 24.7–26.3 oz.
• SAGLD50-2SPD — Large 2-speed model for offshore big game; 28.6/40 lb drag with maximum line capacity (65–80 lb braid, 460–610 yd) for tuna and large yellowtail in offshore conditions; 5.8:1 high / 3.1:1 low. 29.8 oz.
• SAGLD55-2SPD / SAGLD60-2SPD — Largest 2-speed models for heavy offshore big game; 33.1/45 lb drag with 80–100 lb braid capacity for large tuna, amberjack, and offshore species requiring maximum drag and line capacity; 5.2:1 high / 2.3:1 low gear ratios for maximum torque in low gear. 37–38.4 oz.

Saltiga Executive 5-Year Warranty & Service Program

Every Saltiga LD purchase includes:

• 5-Year Limited Warranty against manufacturing defects with proof of purchase; expedited service pending parts availability; free expedited return shipping (2nd Day Air or Priority Mail).
• Free 5-Year Clean & Service for the original owner with proof of purchase; reels returned in a special Saltiga signature bag within 1 business day of arrival at the Daiwa Service Department; free expedited return shipping included.
• Applies to all US model Saltiga reels with valid proof of purchase (2020 Saltiga Spinning, 2020 Saltiga LD, and all previous Saltiga spinning and Star Drag models).

Best For

• Yellowtail — Two-speed system is the definitive advantage for yellowtail on live bait and iron; high gear for fast line recovery when fish run toward the boat, low gear for maximum cranking power when fish go deep or surge toward kelp and structure.
• Tuna & Big Game — LD35–LD50 with 28.6/40 lb drag and 65–80 lb braid capacity for tuna and offshore big game; two-speed critical for sustained fights with large tuna that require alternating between fast retrieve and maximum torque.
• Heavy Offshore (LD55/LD60) — 33.1/45 lb drag and 80–100 lb braid capacity for the largest offshore species; 2.3:1 low gear ratio delivers maximum torque for turning large fish at depth.
• White Seabass — Lever drag precision and two-speed versatility for white seabass in kelp and structure; low gear provides the cranking power needed to turn large white seabass away from structure on the initial run.

Narrow-Spool Versatility for Yellowtail, Tuna, and Offshore Work

The Avet JX G2 Lever Drag Reel gives anglers a taller, narrower platform with the speed, line capacity, and drag control to handle a wide range of saltwater techniques. Its 6.3:1 high gear helps you recover line quickly, while the 3.8:1 low gear gives you extra leverage when a fish circles, sounds, or turns against the rod.

The JX G2 is a practical step up when a compact MX-style reel is not enough, but you still want a reel that is comfortable to cast, jig, and fish vertically. With 65 lb braid capacity to 400 yards, up to 21 lb at strike and 28 lb at full, MC cast control with five magnetic settings, and a true one-piece 6061-T6 aluminum frame, it is built for serious mid-range saltwater work. Made in the USA.

Why the JX Profile Matters

The taller, narrower spool helps the JX retrieve more line per crank and keeps line management more controlled when respooling. That geometry is useful when you are moving between vertical jigging, casting, live bait, and fast line recovery during a yellowtail or tuna fight.

Speed for the Cast, Leverage for the Fight

• 6.3:1 high gear: Recover line quickly and work a presentation efficiently.
• 3.8:1 low gear: Add cranking leverage when a fish circles near the boat or pulls deep.
• MC cast control: Five magnetic settings help manage spool speed and reduce backlash risk when casting.
• Dry carbon fiber drag: Deliver smooth, consistent stopping power through the fight.

The Right Pick If...

• You target yellowtail, tuna, and other mid-range saltwater species.
• You want a 2-speed reel for both casting and vertical fishing.
• You need 65 lb braid capacity to 400 yards in a 25–50 lb line-class setup.
• You want a narrow spool that improves line management and retrieve efficiency.
• You prefer Blue or Silver with the listed guide-plate configuration.

Best Techniques and Conditions

• Vertical jigging: Use high gear to work and recover a jig, then shift low when a fish turns the hookup into a heavy pull.
• Live-bait fishing: Use the taller spool and MC control to manage line during a cast, then recover line quickly when a fish changes direction.
• Yellowtail and tuna fishing: The listed drag range and 25–50 lb line class suit mid-range offshore targets.
• Boat and nearshore saltwater: The corrosion-resistant anodized aluminum frame is made for regular saltwater use.

Where It Fits in the Avet Lineup

The JX G2 is the versatile 2-speed JX platform for anglers who want casting control and a taller, narrower spool. For a more Raptor-focused JX platform, compare the Avet JX Raptor 2-Speed Reel. For a more compact single-speed option, see the Avet G2 MXJ Single Speed Reel. For more JX 6/3 two-speed power and MC finish, compare the Avet JX 6/3 Raptor MC Plus.

Key Features

• 2-speed gearing: 6.3:1 high and 3.8:1 low.
• Drag range: Up to 21 lb at strike and 28 lb at full.
• 65 lb braid capacity: 400 yards.
• MC Cast Control: Five magnetic settings for spool control.
• 25–50 lb line class: Built for versatile mid-range saltwater fishing.
• Narrow-spool JX profile: Helps line management and vertical presentation control.
• One-piece 6061-T6 marine-grade aluminum frame: Strong, rigid construction.
• 8 stainless steel ball bearings: Smooth reel operation.
• Ratcheting glide plate and strike stop button: Repeatable lever-drag control.
• Precision-machined stainless steel gears: Durable cranking under load.
• Included hardware: Matching machined aluminum rod clamp and large soft-touch handle knob.
• Made in USA.

Models & Specs

Available models and SKUs

Tackle Express Tips

• Start with a moderate MC setting and tune it to your lure, line, and casting conditions instead of tightening the spool more than necessary.
• Use high gear for line recovery, then shift low when the fish circles or settles into a heavy pull.
• Set the strike position before the trip so your drag pressure is familiar when the bite turns fast.

FAQ

How much braid does the Avet JX G2 hold?
The listed specification is 65 lb braid at 400 yards.

What makes the JX G2 different from an MXJ reel?
The JX G2 uses a taller, narrower spool with 2-speed gearing, 65 lb braid capacity to 400 yards, and a 25–50 lb line class. The MXJ is the more compact option for anglers who prefer a smaller platform.

Does the JX G2 include a rod clamp?
Yes. The listed feature set includes a matching machined aluminum rod clamp.

Complete the Setup

Protect the reel between trips with the Avet Reel Bags, and confirm hardware fitment with the Avet Reel Clamp Kits. For a broader size and technique comparison, use the Avet Reels Buyer’s Guide.

The Okuma Makaira SEa 2 Speed Lever Drag Reels feature Special Edition Gun Metal and Black anodizing with a yellowfin tuna etched into the sideplate. The Carbonite dual force drag system maximizes high-end drag pressure, efficiency, and overall smoothness. Its oversized handle and lower low-speed gearing versus the original Makaira serve up extreme torque for battling trophy fish.

Key Features:

• Special Edition Anodizing: Gun Metal and Black finish with yellowfin tuna etching
• Carbonite Dual Force Drag: Maximizes high-end drag pressure and smoothness
• TSI-301 Oil on Spool Bearings: Increases freespool 2-1/2 times
• Full Grease Pack Bearings: All non-spool bearings for maximum longevity
• Machined Frame Clearance: Increased clearance between spool and cross bars
• Oversized Handle Knobs: MK-8/10/15 feature MK-20 size, MK-20/30 feature MK-50 size
• Lower Speed Gearing: 1.3:1 in 20/30 sizes, 1.0:1 in 50 size for extreme torque
• 2-Speed Gearing System: High-speed retrieve and low-speed power
• Helical Cut Gearing: Smooth, quiet operation
• Silent Anti-Reverse: Instant hooksets without noise
• CRC Coating: Corrosion-Resistant Coating for saltwater durability
• Machined Rigid Frame: Maximum strength and stability
• T-Bar Handle: Ergonomic design for all-day cranking

Specifications Table:

Line Capacity:

• MK-15IISEA: 550/20 lb, 410/25 lb, 310/30 lb
• MK-16IISEa: 870/20 lb, 650/25 lb, 500/30 lb
• MK-20IISEA: 870/25 lb, 660/30 lb, 530/40 lb
• MK-30IISEA: 850/30 lb, 700/40 lb, 550/50 lb

Performance Advantages:

• 2.5x Freespool Increase: TSI-301 oil on spool bearings for effortless casting
• Extreme Torque: Lower low-speed gearing for maximum cranking power
• Dual Force Drag: Up to 55 lbs of stopping power
• Special Edition Finish: Gun Metal and Black with yellowfin tuna etching
• Oversized Components: Larger handle knobs for improved grip and leverage
• Topless Frame Design: Easy spool access and reduced weight

Ideal Applications:

• Offshore trolling for yellowfin tuna, bluefin tuna, and marlin
• Big game fishing requiring extreme torque and drag
• Long-range fishing trips
• Targeting trophy-class pelagic species
• Situations requiring 2-speed versatility
• Serious offshore anglers demanding premium performance

When you need a premium Special Edition 2-speed lever drag reel with Carbonite dual force drag, TSI-301 oil for 2.5x freespool increase, and extreme torque gearing for trophy tuna and big game fish, the Okuma Makaira SEa is the choice of elite offshore anglers.

Note: Gun Metal color may vary.

The Penn Fathom Two Speed Conventional Reel (Original Black & Gold) is the proven workhorse that serious saltwater anglers have trusted for years. When you need to crank a big fish up from depth, switch gears mid-fight, or grind through a long bottom session without your reel giving out — this is the reel built for that job. It's not flashy. It's built to work.

Why Buy the Penn Fathom 2-Speed?

The Fathom 2-Speed gives you the mechanical advantage of two gear ratios in one compact, full-metal reel. When a big fish runs, you stay in high gear. When it's time to grind it up from depth, you drop to low gear and crank. That versatility — combined with Penn's legendary Dura-Drag system and stainless steel gear train — makes this one of the most capable conventional reels at its price point.

Main Use & Benefit

Designed for offshore and nearshore saltwater fishing where depth, drag pressure, and gear durability matter. The two-speed mechanism is the core benefit — it lets you fight fish efficiently at any depth without burning out your arms or losing control of the battle.

Problem It Solves

Single-speed conventional reels force you to choose between fast retrieval and cranking power. The Fathom 2-Speed eliminates that compromise. Drop into low gear when a big fish is pinned deep, then shift to high gear to recover line fast when it runs toward the boat. One reel handles both scenarios.

Advantages Over Disadvantages

• ✅ Two-speed mechanism gives mechanical advantage at depth — no single-speed reel can match this for deep-water fights
• ✅ Full metal body and sideplates maintain gear alignment under extreme load
• ✅ Penn Dura-Drag delivers consistent, heat-resistant drag pressure across long fights
• ✅ Stainless steel main gear, pinion gear, and gear train built for long-term durability
• ✅ Classic black and gold Penn styling — a proven, trusted design
• ⚠️ Heavier than single-speed spinning reels — not ideal for light finesse applications
• ⚠️ Lever drag requires familiarity — new anglers may need a short learning curve

When to Choose It

Choose the Penn Fathom 2-Speed when you're targeting species at depth, fishing heavy live bait, or need a reel that can handle sustained drag pressure over a long fight. It's the right call for deep-drop bottom fishing, offshore jigging, live bait fishing for large pelagics, and any situation where cranking power matters more than casting distance.

Best Fishing Techniques

• Deep-drop bottom fishing — low gear cranking power to bring fish up from depth
• Slow-pitch and speed jigging — high gear for fast jig retrieves, low gear for grinding up big fish
• Live bait fishing — smooth lever drag for controlled freespool and precise strike settings
• Light trolling — consistent drag pressure for pelagic species
• Vertical jigging — compact size and two-speed versatility ideal for working jigs at depth

Best Conditions

• Offshore and nearshore saltwater environments
• Deep-water structure fishing (reefs, ledges, wrecks)
• Kelp beds and rocky inshore structure
• Party boat and charter boat fishing
• Any situation requiring sustained drag pressure and gear durability

Best For

• Techniques: Deep-drop bottom fishing, slow-pitch jigging, speed jigging, live bait fishing, light trolling, vertical jigging
• Species: Yellowtail, halibut, tuna, calico bass, rockfish, lingcod, white seabass, grouper, snapper
• Use Cases: Party boat fishing, charter boat fishing, offshore trips, kelp bed fishing, deep-water structure fishing

Key Features

• 2-Speed Mechanism — Instant high/low gear switching for maximum versatility during the fight
• Full Metal Body & Sideplates — Maintains precise gear alignment under heavy loads
• Penn Dura-Drag System — Smooth, heat-resistant drag performance for long, demanding fights
• Stainless Steel Gear Train — Main gear, pinion gear, and gear train built for strength and longevity
• Lever Drag System — Precise, repeatable drag settings with easy freespool access
• Compact, Lightweight Frame — Serious power in a manageable package
• Classic Black & Gold Penn Design — Original Fathom series styling trusted by charter captains worldwide

Models & Specs

Line Capacity

Verify specs with Penn's official documentation before purchase. Specs subject to change.

Tackle Express Tips

• Use the low gear to save your arms on deep drops — When you're fishing 200+ feet of water for rockfish, lingcod, or halibut, drop into low gear as soon as the fish is hooked and grind it up steadily. Fighting a big fish in high gear at depth is exhausting and increases the chance of losing it. Let the reel's mechanical advantage do the work.
• Set your strike and full drag positions before you drop — The lever drag system lets you pre-set both your strike drag and full drag positions. Do this before every drop so you're not fumbling with settings when a fish hits. A good rule of thumb: set strike drag at about 25–30% of your line's breaking strength, and full drag at no more than 50%.
• Rinse the lever drag mechanism after every saltwater trip — Salt crystals can work into the lever drag cam and cause sticking or inconsistent drag settings over time. A light freshwater rinse of the drag lever area (not a soak) after each use keeps the mechanism smooth and your drag settings reliable.

Frequently Asked Questions

Q: What is the difference between the FTH25NLD2, FTH30LD2, and FTH40LD2?
A: The primary differences are line capacity and drag rating. The 25NLD2 and 30LD2 share the same gear ratios (5.5:1 / 2.7:1) and 33 lb max drag, but the 30LD2 holds more line — making it better for deeper water or heavier braid. The 40LD2 steps up to a 40 lb max drag and slightly lower gear ratios (5.0:1 / 2.5:1) for more cranking power, ideal for larger species and heavier applications.

Q: Is the Penn Fathom 2-Speed good for yellowtail and tuna?
A: Yes — it's an excellent choice for both. The two-speed system is particularly valuable when yellowtail or tuna sound deep after being hooked. Drop to low gear to maintain pressure and grind them up without burning out. The Dura-Drag system handles the sustained pressure these species put on gear, and the stainless steel gear train holds up to repeated hard fights.

Q: How does the lever drag work compared to a star drag reel?
A: A lever drag reel uses a lever (instead of a star wheel) to set drag pressure, with pre-set positions for freespool, strike, and full drag. This gives you faster, more repeatable drag adjustments mid-fight — critical when a fish makes a sudden run. Star drag reels require spinning the star wheel to adjust, which is slower and less precise. Lever drag is preferred by most serious offshore anglers for this reason.

Q: What line should I use on the Penn Fathom 2-Speed?
A: For most offshore applications, 50–65 lb braided line is the go-to choice on the 25NLD2 and 30LD2, with a 60–80 lb fluorocarbon or mono leader. The 40LD2 handles 65–80 lb braid well for heavier bottom fishing or larger pelagics. Mono is still a solid choice for live bait applications where stretch is beneficial.

Extra-Wide Two-Speed Power for Maximum Line Capacity

The Avet HXW 5/2 Raptor Plus Non-MC 2 Speed Reel is built for trophy anglers who need an extra-wide platform, serious line capacity, and the leverage to stay in control when large offshore fish go deep. Its 5.0:1 high gear helps recover line and work lures, while the 2.4:1 low gear gives you the cranking power to keep pressure on the biggest fish.

When a long-range hookup turns into a sustained offshore battle, the HXW profile gives you room for the heavy braid and mono these applications demand. The massive spool, Raptor carbon fiber drag, CNC-machined 6061-T6 aircraft-grade aluminum frame, stainless steel components, and corrosion-resistant finish are designed for bluefin, yellowfin, marlin, sailfish, large yellowtail, and other trophy gamefish. This is the No-MC configuration, made in California.

When Extra-Wide Capacity Earns Its Keep

The HXW 5/2 Raptor Plus is the right pick when maximum line capacity is central to the plan. Choose it for long-range trips, deep-water jigging, and trophy fish that can take line before you have a chance to turn them. The wide profile also gives you a substantial platform for heavy tackle and long, demanding fights.

Two Speeds, One Serious Offshore Job

• 5.0:1 high gear: Gain line on running fish and work or recover lures efficiently.
• 2.4:1 low gear: Apply maximum cranking power when a trophy fish sounds or stays deep.
• Smooth shifting: Change speeds as the fight moves from line recovery to heavy pressure.
• Raptor drag: Use smooth, consistent pressure through long battles.

The Right Pick If...

• You target giant bluefin, yellowfin, marlin, sailfish, large yellowtail, or other trophy offshore species.
• You need an extra-wide reel for maximum line capacity on long-range fishing trips.
• You fish heavy braid or mono and want a large spool for deep-water and big-game applications.
• You prefer direct No-MC cast-control performance.
• You want right- or left-hand retrieve options in a USA-made Raptor Plus platform.

Best Techniques and Conditions

• Long-range live bait: Use high gear to recover line during a run, then shift low when the fish settles into a deep pull.
• Deep-water jigging: Take advantage of the large spool and low gear when a heavy fish needs to be worked up from depth.
• Kite fishing and offshore bait: The extra-wide platform suits long runs and heavy line systems for trophy yellowfin and tuna.
• Heavy trolling: Use low gear for leverage when a marlin or sailfish turns a fast run into a close-range grind.

Where It Fits in the Avet Lineup

The HXW 5/2 Raptor Plus Non-MC is the extra-wide two-speed choice when maximum capacity and direct cast-control performance matter most. For a three-speed HXW platform, compare the Avet HXW 5/3 Raptor Plus. For a more compact wide-profile reel with MC finish, see the Avet HX 5/2 Raptor Plus MC. For another two-speed HXW configuration, compare the Avet HXW Raptor 2-Speed Reel.

Key Features

• Two-speed gearing: 5.0:1 high and 2.4:1 low.
• Raptor carbon fiber drag: Smooth, consistent pressure under extreme load.
• Extra-wide HXW profile: Built for maximum line capacity and long-range fishing.
• Massive spool: Designed for heavy braid and mono in deep-water and trophy applications.
• No-MC configuration: Direct, non-magnetic cast-control performance.
• CNC-machined 6061-T6 aircraft-grade aluminum: Strength and durability for serious offshore use.
• Stainless steel gears and hardware: Built for extreme saltwater environments.
• Sealed bearings and heat-dissipating drag materials: Smooth operation and consistent performance during long fights.
• Corrosion-resistant anodized finish: Added protection in saltwater.
• Made in USA: Manufactured in California.

Models & Specs

Available models and SKUs

Tackle Express Tips

• Use high gear to catch up to a running fish, then shift into low before a deep run turns into a leverage problem.
• Set the strike position before the trip and make drag changes smoothly while the fish is moving.
• Use the extra-wide spool for a line system built around the reel’s intended long-range and trophy-fish applications.

FAQ

What makes the HXW different from the HX or HXJ?
The HXW uses an extra-wide profile and large spool built around maximum line capacity. The HX is a more compact wide-profile platform, while the HXJ is narrower and more comfortable when a smaller footprint matters.

Is this the MC version?
No. This listing is the No-MC configuration with direct, non-magnetic cast-control performance.

Where can I compare Avet reel sizes and applications?
Use the Avet Reels Buyer’s Guide for reel-size comparisons, retrieve options, gear setups, and offshore use cases.

Complete the Setup

Compare the Avet HXW 5/3 Raptor Plus if you want three-speed control, or protect your reel between trips with the Avet Reel Cover. The Avet Reels Buyer’s Guide can help match the HXW platform to your offshore plan.

Compact Two-Speed Control for Versatile Saltwater Fishing

The Avet JX 6/3 Raptor MC Plus 2 Speed Reel combines a compact, narrow-profile JX frame with Raptor drag performance and a distinctive MC multi-color anodized finish. Its 6.0:1 high gear helps you recover line and work lures, while the 3.0:1 low gear gives you added cranking leverage when a fish sounds, circles, or pulls hard near the boat.

When your day moves from yellowtail and tuna to dorado, wahoo, rockfish, or lingcod, the JX 6/3 Raptor MC Plus keeps the setup adaptable without becoming cumbersome. Precision-machined 6061-T6 aircraft-grade aluminum, stainless steel components, sealed bearings, and a smooth lever drag are built for demanding offshore and inshore saltwater use. Available in right- and left-hand retrieve. Made in California.

Compact Size, Real Two-Speed Versatility

The narrow JX profile stays comfortable in hand while giving you two useful retrieve ranges. Use high gear when speed and line recovery matter, then shift into low when the fish changes the rules and steady cranking power becomes more important than raw retrieve speed.

High Gear to Move, Low Gear to Finish

• 6.0:1 high gear: Gain line on a running fish and work lures efficiently.
• 3.0:1 low gear: Add leverage when a fish sounds or makes a heavy turn.
• Raptor carbon drag: Maintain smooth, consistent pressure during extended fights.
• MC finish: Add a corrosion-resistant multi-color anodized finish to a purpose-built saltwater reel.

The Right Pick If...

• You want a compact, narrow-profile 2-speed reel.
• You target yellowtail, tuna, dorado, wahoo, white seabass, rockfish, or lingcod.
• You fish both offshore and inshore saltwater applications.
• You want MC anodized styling with Raptor drag performance.
• You need right- or left-hand retrieve options in a versatile JX platform.

Best Techniques and Conditions

• Live-bait fishing: Use high gear to recover line when a fish runs, then shift low when the fish turns deep.
• Jigging: Work and recover the jig in high gear, with low gear ready for the heavy pressure after the hookset.
• Coastal yellowtail and white seabass: The compact JX platform is comfortable for repeated casts and long sessions.
• Offshore tuna and wahoo: Use the two-speed system to move quickly between line recovery and controlled leverage.
• Deep-water rockfish and lingcod: Shift to low gear when a fish needs steady pressure coming up from depth.

Where It Fits in the Avet Lineup

The JX 6/3 Raptor MC Plus is the compact JX option when you want 6.0:1/3.0:1 gearing and an MC finish. For the classic JX Raptor platform with 6.3:1/3.8:1 gearing and MC cast control, compare the Avet JX Raptor. For G2 simplicity and a more moderate drag range, see the Avet JX G2. For three-speed control, compare the Avet Raptor Plus MC 3 Speed.

Key Features

• Two-speed gearing: 6.0:1 high and 3.0:1 low.
• Raptor carbon fiber drag: Smooth, consistent pressure under load.
• Compact narrow profile: Comfortable handling for extended fishing.
• MC multi-color anodized finish: Corrosion-resistant finish with a distinctive look.
• CNC-machined 6061-T6 aircraft-grade aluminum: Strong, durable frame construction.
• Stainless steel gears and hardware: Built for saltwater environments.
• Sealed bearings: Smooth operation with added corrosion resistance.
• Lever drag control: Precise pressure adjustments during the fight.
• Right- and left-hand retrieve: Six listed configurations.
• Made in USA: Manufactured in California.

Models & Specs

Available models and SKUs

Tackle Express Tips

• Use high gear for line recovery, then shift to low before a deep-running fish turns the fight into a leverage test.
• Set the strike position before the trip and make lever-drag changes gradually as the fish changes direction.
• Match the reel to a rod and line system designed for the intended species and saltwater technique.

FAQ

What are the gear ratios on the JX 6/3 Raptor MC Plus?
The listed ratios are 6.0:1 in high gear and 3.0:1 in low gear.

Does this reel come in left-hand retrieve?
Yes. The listed lineup includes a left-hand Silver model along with right-hand Black, Silver, Blue, Gunmetal, and Red models.

Where can I compare Avet reel sizes and fishing applications?
Use the Avet Reels Buyer’s Guide for reel-size comparisons, retrieve options, gear setups, and offshore use cases.

Complete the Setup

Keep the reel protected between trips with the Avet Reel Bags, and check compatible hardware with the Avet Reel Clamp Kits. For a different two-speed feel, compare the Avet JX Raptor.

Okuma Cavalla 2-Speed Lever Drag Reel

Built for the serious offshore angler, the Okuma Cavalla 2-Speed Lever Drag Reel delivers the stopping power and smooth drag performance needed to battle big-game fish like tuna, wahoo, and yellowfin. The Midnight Blue Limited Edition finish turns heads on the rail while the precision-engineered internals get the job done when it counts.

Best For

• Techniques: Chunking, live baiting, deep dropping, kite fishing
• Species: Bluefin tuna, yellowfin tuna, wahoo, mahi-mahi, amberjack
• Use Cases: Offshore trolling, stand-up fishing, long-range trips, party boat rail fishing

Key Features

• 2-speed gear system for high-speed retrieves and low-gear power when fighting fish
• Precision lever drag system for smooth, consistent drag pressure
• Corrosion-resistant construction for saltwater durability
• Midnight Blue Limited Edition finish
• Machined aluminum frame and side plates
• Multi-disc drag system for reliable stopping power

Tackle Express Tips:

• Make sure you service your reel, it will last you for years if you do
• If you're putting braided line on your reel, you don't need tape on the spool with the Cavalla, it has a rough knurled area on the spool.
• Great for small to medium size fish, say 20-50lbs

Models & Specs