6 products
Sort by:
6 products
6 products
The Okuma PCH Custom Conventional Rods are designed specifically for West Coast anglers. The PCH Custom is lightweight and sensitive with enough strength and backbone to get fish to the boat, making it the perfect choice for offshore trolling and conventional fishing applications.
The backbone to the PCH Custom rods is the patented blank construction process, called Unidirectional Fiber Reinforcement or UFR-II. This patented process blends unidirectional fiber over 24-ton carbon in the extended tip section of the rod to increase lifting strength and power. UFR-II provides strength without sacrificing sensitivity, so anglers can feel the lightest of bites while having the power to battle trophy fish.
Updated Models: Okuma changed to updated models that have a light gray Okuma aluminum reel seat instead of the previous dark gray ALPS reel seat (January 2026).
Key Features:
- UFR-II Technology: Unidirectional Fiber Reinforced rod tip increases lifting strength and power
- 24-Ton Carbon Blanks: Extremely lightweight and responsive construction
- 3K-Woven Carbon Wrap: Outer blank wrap improves hoop strength
- Fuji K-Guides: M, MH, and H models feature Alconite inserts
- ALPS HXN Guides: XH models feature Zirconium inserts for heavy-duty applications
- Machined Aluminum Reel Seats: Updated light gray Okuma aluminum reel seats on all models
- Tapered TPE Grips: 7' rods feature fore and rear grips for comfort
- Tapered Shrink Tube: 8' rods feature durable, comfortable grip material
- ALPS Non-Skid Butt Caps: Rubber butt caps on all PCH models
- Limited Lifetime Warranty: Backed by Okuma quality assurance
Specifications:
- Blank Material: 24-ton carbon with UFR-II technology
- Blank Wrap: 3K-woven carbon for improved hoop strength
- Guide System: Fuji K-guides with Alconite inserts (M, MH, H) or ALPS HXN with Zirconium (XH)
- Reel Seat: Machined aluminum Okuma reel seats (updated light gray finish)
- Grip Material: Tapered TPE (7' models) or tapered shrink tube (8' models)
- Butt Cap: ALPS non-skid rubber
- Target Species: Yellowtail, white seabass, tuna, and other pelagic species
Performance Advantages:
- Lightweight & Sensitive: Feel the lightest bites while maintaining power
- Increased Lifting Strength: UFR-II technology provides superior fish-fighting power
- West Coast Specific: Designed for California and West Coast fishing conditions
- Improved Hoop Strength: 3K-woven carbon wrap prevents blank failure
- Versatile Guide Options: Alconite for lighter models, Zirconium for heavy-duty XH
Ideal Applications:
- West Coast offshore trolling for yellowtail and tuna
- Conventional fishing for white seabass and pelagic species
- Offshore fishing requiring lightweight rods with maximum power
- Targeting trophy fish from boats
- Situations requiring sensitivity and strength
- Fishing from boats where conventional tackle is preferred
When you need a premium conventional rod with UFR-II technology for increased lifting strength, 24-ton carbon construction, and West Coast-specific design for yellowtail, tuna, and white seabass, the Okuma PCH Custom Conventional Rods are the choice of serious West Coast anglers.
Shipping charges may apply at checkout due to an oversized package if the rod is over 8 feet.
The Okuma Rockaway Surf Rods are designed for serious surf fishing. With 11 total models in the Rockaway lineup, you are bound to find what you need. The 50/50 2-piece blank construction is designed for long distance casting. Models range from 8' to 12' in length and have a variety of actions available for different surf fishing applications.
Key Features:
- 24-Ton Carbon Blanks: Extremely lightweight and responsive construction
- UFR-II Technology: Ultimate Flex Reinforcement rod tip technology
- Tip Over Butt Ferrule: 50/50 connection for improved balance and long-distance casting
- XQ Series Sea Guide Frames: Angled 316-stainless steel for durability
- Zirconium Inserts: Compatibility for both braid and monofilament lines
- Tapered Shrink Tube Grips: Non-slip surface and durability
- Rounded EVA Butt Cap: Improved leverage while casting
- 11 Model Options: 8' to 12' lengths with ML, M, and MH power ratings
- 1-Year Limited Warranty: Backed by Okuma quality assurance
Specifications Table:
| Model | Length | Power | Line | Lure | Weight |
|---|---|---|---|---|---|
| RA-S-802M | 8'0" | M | 10-17 lbs | 1/2-1-1/2 oz | 7.8 oz |
| RA-S-802MH | 8'0" | MH | 12-20 lbs | 3/4-2 oz | 8 oz |
| RA-S-902M | 9'0" | M | 10-17 lbs | 1/2-1-1/2 oz | 8.1 oz |
| RA-S-902MH | 9'0" | MH | 12-20 lbs | 3/4-2 oz | 8.2 oz |
| RA-S-1002ML | 10'0" | ML | 8-17 lbs | 1/2-2 oz | 8.9 oz |
| RA-S-1002M | 10'0" | M | 10-20 lbs | 3/4-3 oz | 9.1 oz |
| RA-S-1002MH | 10'0" | MH | 12-25 lbs | 1-4 oz | 9.2 oz |
| RA-S-1102ML | 11'0" | ML | 8-17 lbs | 1/2-2 oz | 9.8 oz |
| RA-S-1102M | 11'0" | M | 10-20 lbs | 3/4-3 oz | 10.6 oz |
| RA-S-1202M | 12'0" | M | 10-20 lbs | 3/4-3 oz | 11 oz |
| RA-S-1202MH | 12'0" | MH | 12-25 lbs | 1-4 oz | 11.6 oz |
All models are 2-piece rods with 50/50 tip over butt ferrule construction.
Construction Details:
- Blank Material: 24-ton carbon for optimal strength-to-weight ratio
- Ferrule Design: 50/50 tip over butt for improved balance and casting distance
- Guide System: XQ series angled Sea Guide 316-stainless steel with Zirconium inserts
- Grip Material: Tapered shrink tube for non-slip surface
- Butt Cap: Rounded EVA for improved casting leverage
- Rod Taper: MF (Moderate-Fast) for versatile surf applications
Ideal Applications:
- Serious surf fishing from beaches and piers
- Long-distance casting for stripers, bluefish, and redfish
- Versatile surf applications with 11 model options
- Beach fishing requiring lightweight, responsive rods
- Surf fishing with both braid and monofilament lines
- Targeting various saltwater species from the surf
When you need a serious surf rod with UFR-II technology, 24-ton carbon construction, 50/50 ferrule design for long-distance casting, and 11 model options from 8' to 12', the Okuma Rockaway Surf Spinning Rods are the choice of dedicated surf anglers.
All Rods are packaged with extreme care! Being fisherman ourselves we take pride in not having rods break during shipping, to ensure they'll be enjoyed and fished. We make sure every rod is wrapped tightly with bubble wrap in the crucial areas and are suspended in a thick rod tube, to keep from being crushed or banged around.
The Okuma PCHi Custom Inshore Casting Rods are the latest addition to a deep lineup of saltwater rods designed specifically for hardcore anglers. These rods were designed with the SoCal Calico Bass fisherman in mind, utilizing the latest in advanced technologies built for the extreme conditions that inshore fishermen face.
The PCHi Custom Series Inshore Rods were designed with the latest technology and insight from leading inshore and tournament anglers from up and down the California coast. The backbone to the PCHi Custom Rods is Okuma's UFR-II: Ultimate Flex Reinforcement rod tip technology. This process blends unidirectional fiber over 24-ton carbon in the extended tip section of the rod to increase lifting strength and power by as much as 400%. This technology provides for the ultimate in strength without sacrificing sensitivity so that you can feel even the lightest of bites.
The component system is all top notch featuring Fuji K-guides with Alconite inserts on the Medium, Medium Heavy, and Heavy models. All models also feature premium Fuji reel seats. All models feature custom cork and TPE grip configuration for comfort and durability. All PCHi Custom Rods also have an ALPS non-skid rubber butt cap to reduce deck slide.
Key Features:
- UFR-II Technology: Ultimate Flex Reinforcement increases lifting strength and power by up to 400%
- 24-Ton Carbon Blanks: Extremely lightweight and responsive construction
- 3K-Woven Carbon Wrap: Outer blank wrap improves hoop strength
- Fuji K-Guide Concept: Frames reduce wind knots for smooth casting
- Alconite Inserts: Reduce abrasion on all inshore models
- Premium Fuji Reel Seat: Maximum reel support and security
- Custom Cork & TPE Grips: Comfort and durability for extended fishing sessions
- Split Grip Design: SG models feature rear cork split grip for reduced weight
- ALPS Non-Skid Butt Cap: Adds comfort and protects your boat deck
- Oversized Hook Keeper: Stainless steel for secure lure storage
- Limited Lifetime Warranty: Backed by Okuma quality assurance
Specifications Table:
| Model | Length | Power | Line | Lure | Weight |
|---|---|---|---|---|---|
| PCHI-C-761M | 7'6" | M | 12-25 lbs | 3/4-1-1/2 oz | 10.8 oz |
| PCHI-C-761H | 7'6" | H | 20-40 lbs | 1-3 oz | 11.6 oz |
| PCHI-C-801MH | 8'0" | MH | 15-30 lbs | 1-2-3/4 oz | 11 oz |
| PCHI-C-801H | 8'0" | H | 20-40 lbs | 1-3 oz | 12 oz |
| PCHI-S-801MH | 7'11" | MH | 15-30 lbs | 1-2-3/4 oz | 10.8 oz |
| PCHI-S-801H | 7'11" | H | 20-40 lbs | 1-3 oz | 11.1 oz |
| PCHI-C-801H-SG | 8'0" | H | 15-30 lbs | 1-3 oz | 9 oz |
| PCHI-C-801XH-SG | 8'0" | XH | 20-40 lbs | 1-1/2-4-1/2 oz | 9.7 oz |
Ideal Applications:
- SoCal Calico Bass fishing around kelp beds and structure
- Inshore fishing for yellowtail, white seabass, and halibut
- Casting swimbaits and jigs in heavy cover
- Tournament fishing on West Coast and East Coast
- Extreme inshore conditions requiring maximum strength
- Fishing from boats where deck protection is important
- Situations requiring ultimate sensitivity and power
When you need a premium inshore casting rod with UFR-II technology for 400% increased lifting strength, Fuji K-guides with Alconite inserts, and custom components designed for SoCal Calico Bass and hardcore inshore fishing, the Okuma PCHi Custom Inshore Casting Rods are the choice of tournament anglers.
Oversize shipping fee may apply! Rods over 8 feet will have an additional shipping charge at checkout.
All Rods are packaged with extreme care! Being fisherman ourselves we take pride in not having rods break during shipping, to ensure they'll be enjoyed and fished. We make sure every rod is wrapped tightly with bubble wrap in the crucial areas and are suspended in a thick rod tube, to keep from being crushed or banged around.
Introducing Okuma's Tesoro Spinning Reels, designed with an Alumilite body, side plate, and Cyclonic Flow Rotor for unparalleled strength and performance. With IPX-7 waterproof technology, these reels offer the ultimate in features and protection, allowing you to dominate any fishing situation from inshore to offshore.
The Tesoro features a 12HPB + 1RB corrosion-resistant stainless-steel bearing drive as well as a Carbonite high output DFD drag system with Cal's drag grease that puts out over 55 pounds of pure fish-stopping drag. The reel is built with a custom titanium spool shaft that reduces flex and weight, as well as oversized brass main gear and C-6191 brass pinion gear that is double supported with ball bearings. The frictionless main shaft design provides smooth operation day in and day out, while the dual anti-reverse system provides maximum strength and reliability.
The rigid machined aluminum screw-in handle design provides direct feedback when turning the handle and locks solidly into place. A rotor brake system works in conjunction with the Tesoro's manual bail trip design for precise control. There are six total models within the Tesoro Spinning reel lineup: 6,000, 8,000, 10,000, 14,000, 18,000, and 20,000 sizes. The three smaller sizes feature high-speed gearing at 5.8:1 with retrieval of 49" of line per turn of the handle. The three larger sizes feature 4.4:1 gear ratio and pick up close to 42" of line per handle turn. All models have an interchangeable screw-in handle system that can be changed from left to right-hand retrieve.
Key Features:
- Alumilite Body & Side Plate: Unparalleled strength with lightweight construction
- IPX-7 Waterproof Technology: Ultimate protection against water intrusion
- 12HPB + 1RB Bearing System: Corrosion-resistant stainless-steel bearings for smooth operation
- Carbonite High Output DFD Drag: Over 55 lbs of fish-stopping drag with Cal's drag grease
- Custom Titanium Spool Shaft: Reduces flex and weight for improved performance
- Oversized Brass Main Gear: C-6191 brass pinion gear double supported with ball bearings
- Frictionless Main Shaft Design: Smooth operation day in and day out
- Dual Anti-Reverse System: Maximum strength and reliability
- Rigid Machined Aluminum Handle: Screw-in design provides direct feedback and solid lock
- Rotor Brake System: Works with manual bail trip design for precise control
- Cyclonic Flow Rotor (CFR): Enhanced airflow to minimize drying time
- Interchangeable Handle: Can be changed from left to right-hand retrieve
Specifications:
- Body Material: Alumilite body and side plate
- Waterproof Rating: IPX-7 waterproof technology
- Bearings: 12HPB + 1RB corrosion-resistant stainless-steel
- Drag System: Carbonite high output DFD with Cal's drag grease
- Max Drag: Over 55 lbs
- Spool Shaft: Custom titanium for reduced flex and weight
- Gearing: Oversized brass main gear with C-6191 brass pinion
- Target Species: Yellowtail, tuna, calico bass, stripers, large inshore and offshore species
Size Options & Gear Ratios:
- 6,000, 8,000, 10,000 Sizes: High-speed 5.8:1 gear ratio, 49" line retrieval per handle turn
- 14,000, 18,000, 20,000 Sizes: Power 4.4:1 gear ratio, 42" line retrieval per handle turn
Performance Advantages:
- IPX-7 Waterproof Protection: Ultimate defense against saltwater intrusion
- 55+ Pounds of Drag: Stops trophy fish in their tracks
- Titanium Spool Shaft: Reduces flex during hard fights
- Double Supported Pinion: Ball bearings on both sides for maximum strength
- Frictionless Design: Smooth operation season after season
- Dual Anti-Reverse: Rock-solid hooksets every time
Ideal Applications:
- Offshore fishing for yellowtail, tuna, and pelagic species
- Heavy inshore fishing for large stripers and calico bass
- Surf fishing for trophy-class fish
- Fishing in harsh saltwater environments
- Situations requiring maximum drag power and waterproof protection
- Long-range fishing trips
- Targeting large, hard-fighting saltwater species
When you need a premium saltwater spinning reel with IPX-7 waterproof technology, Alumilite construction, over 55 lbs of drag, and titanium spool shaft for battling trophy fish, the Okuma Tesoro Spinning Reels are the choice of serious offshore and inshore anglers.
The Okuma PCH Custom Spinning Popping Rods are designed specifically for West Coast anglers. The PCH Custom is lightweight and sensitive with enough strength and backbone to get fish to the boat, making it the perfect choice for popping and surface lure fishing.
The backbone to the PCH Custom rods is the patented blank construction process, called Unidirectional Fiber Reinforcement or UFR-II. This patented process blends unidirectional fiber over 24-ton carbon in the extended tip section of the rod to increase lifting strength and power. UFR-II provides strength without sacrificing sensitivity, so anglers can feel the lightest of bites while having the power to battle trophy fish.
Key Features:
- UFR-II Technology: Unidirectional Fiber Reinforced rod tip increases lifting strength and power
- 24-Ton Carbon Blanks: Extremely lightweight and responsive construction
- 3K-Woven Carbon Wrap: Outer blank wrap improves hoop strength
- Fuji K-Guides: M, MH, and H models feature Alconite inserts
- ALPS HXN Guides: XH models feature Zirconium inserts for heavy-duty applications
- Machined Aluminum Reel Seats: ALPS CAH reel seats on all models
- Tapered TPE Grips: 7' rods feature fore and rear grips for comfort
- Tapered Shrink Tube: 8' rods feature durable, comfortable grip material
- ALPS Non-Skid Butt Caps: Rubber butt caps on all PCH models
- Limited Lifetime Warranty: Backed by Okuma quality assurance
Specifications:
- Blank Material: 24-ton carbon with UFR-II technology
- Blank Wrap: 3K-woven carbon for improved hoop strength
- Guide System: Fuji K-guides with Alconite inserts (M, MH, H) or ALPS HXN with Zirconium (XH)
- Reel Seat: Machined aluminum ALPS CAH on all models
- Grip Material: Tapered TPE (7' models) or tapered shrink tube (8' models)
- Butt Cap: ALPS non-skid rubber
- Target Species: Yellowtail, white seabass, tuna, and other pelagic species
Performance Advantages:
- Lightweight & Sensitive: Feel the lightest bites while maintaining power
- Increased Lifting Strength: UFR-II technology provides superior fish-fighting power
- West Coast Specific: Designed for California and West Coast fishing conditions
- Improved Hoop Strength: 3K-woven carbon wrap prevents blank failure
- Versatile Guide Options: Alconite for lighter models, Zirconium for heavy-duty XH
Ideal Applications:
- Popping and surface lure fishing for yellowtail and tuna
- West Coast offshore fishing for pelagic species
- Working large poppers and stickbaits
- Targeting white seabass and other trophy fish
- Situations requiring lightweight rods with maximum power
- Fishing from boats where sensitivity and strength are critical
When you need a premium spinning popping rod with UFR-II technology for increased lifting strength, 24-ton carbon construction, and West Coast-specific design for yellowtail, tuna, and white seabass, the Okuma PCH Custom Spinning Popping Rods are the choice of serious West Coast anglers.
Shipping charges may apply at checkout due to an oversized package if the rod is 8' or over.
The Okuma Convector Levelwind Reels revolutionized the fishing tackle industry, offering a powerful gearing and drag system platform previously unattainable at the Convector's value-oriented price. Today, the Convector has grown to a position as a staple in salmon fisheries from Alaska to the Great Lakes, and everywhere in between.
The Convector's no-nonsense design features aluminum and stainless steel components at all critical stress points, along with Okuma's patented Mechanical Stabilization System that maintains parts alignment over the long term. Line counter models are available in both right and left hand retrieve to serve all anglers.
Key Features:
- Lightweight Corrosion-Resistant Frame: Frame and side plates built for durability
- Machined Aluminum Spool: Gun smoke anodized finish
- Stainless Steel Reinforcing Rings: Side plate rings for added strength
- Multi-Disc Carbonite Drag: Powerful, smooth drag system
- Ratcheting Drag Star: Precise drag settings
- 2BB+1RB Bearing System: Stainless steel bearing drive
- Quick-Set Anti-Reverse: Roller bearing for instant hooksets
- Dual Anti-Reverse System: Mechanical and roller bearing
- Speed Lock Pinion Gear: System for reliable operation
- Stainless Steel Gears: Durable main and pinion gear system
- XL Gearing: Drop down gear box on 20, 30, 45 sizes
- Self-Lubricating Gear System: All models for smooth operation
- Wide Mouth Levelwind: "L" models with clearance for copper line
- Ergo Grip Handle Knobs: Featured on all models
- Stainless Steel Body Armor: On CV-55L model
- MSS: Mechanical Stabilizing System: Increased durability and parts alignment
- 1-Year Warranty: Backed by Okuma quality assurance
Specifications:
- Frame Material: Lightweight, corrosion-resistant construction
- Spool: Machined aluminum with gun smoke anodized finish
- Drag System: Multi-disc Carbonite with ratcheting drag star
- Bearings: 2BB + 1RB stainless steel
- Gearing: Stainless steel main and pinion with XL gearing on select sizes
- Levelwind: Wide mouth on "L" models for copper line compatibility
- Target Species: Salmon, trout, walleye, and various freshwater and saltwater species
Performance Advantages:
- Value-Oriented Price: Powerful gearing and drag previously unattainable at this price point
- Salmon Fishery Staple: Proven from Alaska to the Great Lakes
- MSS Technology: Maintains parts alignment over the long term
- Copper Line Compatible: Wide mouth levelwind on "L" models
- Dual Anti-Reverse: Maximum reliability for hooksets
- Self-Lubricating: Reduced maintenance requirements
Ideal Applications:
- Salmon fishing from Alaska to the Great Lakes
- Trolling for trout and walleye
- Freshwater and saltwater applications
- Copper line trolling with "L" models
- Downrigger fishing
- Situations requiring powerful drag at exceptional value
When you need a powerful levelwind reel with multi-disc Carbonite drag, Mechanical Stabilizing System, and exceptional value for salmon fishing from Alaska to the Great Lakes, the Okuma Convector Levelwind Reels are the choice of serious trolling anglers.