Shimano Talica-A T-Bar Handle Replacement

Shimano Talica-A T-Bar Handle Replacement is the T-Bar handle that comes stock on the new redesigned Talica 20IIA & 25IIA, producing unparalleled winding power. The new T-Bar Handle replacements will fit previous 2 speed model Talica II allowing you to gain more leverage and improved ergonomics when retrieving big fish. Original Shimano part and is easy to install, simply requiring a screw driver and wrench to change out your smaller handle. Enjoy increased comfort and control while reeling in a catch.

Shimano Talica A T-Bar Handle Replacement Fits:

Talica ll & Talica IIA

• TAC12II
• TAC16II
• TAC20II
• TAC25II

The T-shaped knob has a 9 degree offset to increase grip and torque.  With a 101mm arm length the Shimano Talica A T-Bar Handle Replacement allows for more power while cranking on a fish.  A great upgrade for your jigging setup, making for more comfort and ease while fishing vertically and winching big fish out of the depths. 

When fishing long hours grinding large jigs, the T-Bar Handle's comfortable grip will help relieve cramping.  When that "cow" tuna does bite, you'll be ready for the long battle.

Shimano OEM Part

Specifications:

  Arm Length: 101mm / 4in 

  Handle Length: 98mm / 3.88in

  Handle width: 66mm / 2.63in

  Handle top-side Diameter: 24mm / 0.95in

  Handle bottom-side Diameter: 32mm / 1.25in

  Handle Weight: 3.4oz

Installation:

First, you must remove the two Phillips screws on each side of the 2-speed button. Gently remove the switch cover, small plastic spacer with switch (Leave switch and spring in the plastic spacer, for reverence)

With a wrench unscrew the two-speed button (set aside) and then remove handle.

Then slide new handle over the post, followed by the two-speed button (tighten well, to help line up spacer screwholes) Place the plastic spacer and switch, then the cover plate and screws and tighten (Blue theadlocker 242 recommended).