- High Efficiency Gearing (HEG)
- X-Ship Gear Support System for enhanced Efficiency, Power and Smoothness
- New Dartainium II Woven Carbon Fiber Drag for High Pressures and Durability
- Super Free for incredible freespool and castability
- E.I. Surface Treatment for extreme corrosion protection
- Ultra-Lightweight Cold Forged Aluminum Magnumlite Spool with E.I.
- Compact, One-Piece Cold Forged AL Frame and Left Sideplate Design with E.I.
- One-Piece Cold Forged and Machined AL Right Sideplate with E.I.
- S A-RB (Shielded A-RB Bearings)
- Super Stopper with Silent Twin Pawl Assist Stopper
- Manual Metal Clutch Lever with Corrosion Prevention Pad
- Adjustable Handle Shank
- Lightweight Ergonomic Handle Knob
- Chrome Plated Screws
- Clicker
- Cold Forged AL Drag Star with Micro-Click
- Metal Rod Clamp
- Approved for use in Saltwater
- Rated for Mono, Flurocarbon and PowerPro lines
Sort by:
53 products
53 products
The all-new Penn Fathom II 2-Speed Lever Drag Reels take a class leading reel and raise the bar even more. New models, sizing, features and optimized billfish models round out the assortment to give a model for every application. Integrating the palm side plate and frame allows the Fathom II Lever Drag reels to be more compact in hand, reduce weight, and increase strength, while the Pull-to-Turn preset knobs allows the angler to truly set it, and forget it. All new cosmetics also bring eye appeal to these reels, and will truly match any rod or boat.
Attention: Penn changed the handle on the 2-Speed Fathoms from the power handle to a football handle. They also removed the ported sections of the handle to make it stronger. We have mixed stock due to this, some have the power handle and some have the football handle. The pictures have been linked to show you which handle you will be getting when you click on the variant.
Features:
- Full Metal Body and Sideplate
- One piece frame and palm sideplate
- Removable Top Spacer Bar and Lugs (60 an 80 sizes only)
- Stainless steel main and pinion gear
- Quick Shift II 2 Speed System
- Pull to Turn preset adjustment
- Dura Drag Washers
- 5 Shielded stainless steel ball bearings
- Double-dog ratchet anti-reverse
- Line Capacity Rings
- Some models do not come with rod clamps
| MODEL NUMBER | FTHII10XNLD2 | FTHII15LD2 | FTHII15XNLD2 | FTHII15XNLD2LH | FTHII25NLD2 | FTHII25NLD2LH | FTHII30LD2 | FTHII30LD2LH | FTHII40NLD2 | FTHII40NLD2LH | FTHII60NLD2 | FTHII80LD2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKU | 1563174 | 1563175 | 1563176 | 1563177 | 1563178 | 1563179 | 1563180 | 1563181 | 1563182 | 1563183 | 1563184 | 1563185 |
| GEAR RATIO | 6.2:1 / 2.8:1 | 6.2:1 / 2.8:1 | 5.5:1 / 2.8:1 | 5.5:1 / 2.8:1 | 5.5:1 / 2.8:1 | 5.5:1 / 2.8:1 | 5.5:1 / 2.8:1 | 5.5:1 / 2.8:1 | 6.0:1 / 1.9:1 | 6.0:1 / 1.9:1 | 5.1:1 / 1.6:1 | 4.2:1 / 1.6:1 |
| REEL HANDLE POSITION | RIGHT | RIGHT | RIGHT | LEFT | RIGHT | LEFT | RIGHT | LEFT | RIGHT | LEFT | RIGHT | RIGHT |
| DRAG TYPE | LEVER DRAG | LEVER DRAG | LEVER DRAG | LEVER DRAG | LEVER DRAG | LEVER DRAG | LEVER DRAG | LEVER DRAG | LEVER DRAG | LEVER DRAG | LEVER DRAG | LEVER DRAG |
| BEARING COUNT | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
| BRAID CAPACITY YD/LB | 425/15 345/20 260/30 | 550/20 410/30 335/40 | 710/20 535/30 435/40 | 710/20 535/30 435/40 | 675/30 555/40 475/50 | 675/30 555/40 475/50 | 740/40 635/50 525/65 | 740/40 635/50 525/65 | 785/50 355/65 565/80 | 785/50 355/65 565/80 | 820/80 700/100 580/130 | 980/100 815/130 600/200 |
| FISHING TYPE | INSHORE/NEARSHORE | INSHORE/NEARSHORE | NEARSHORE/OFFSHORE | NEARSHORE/OFFSHORE | NEARSHORE/OFFSHORE | NEARSHORE/OFFSHORE | NEARSHORE/OFFSHORE | NEARSHORE/OFFSHORE | NEARSHORE/OFFSHORE | NEARSHORE/OFFSHORE | NEARSHORE/OFFSHORE | NEARSHORE/OFFSHORE |
| MAX DRAG LB | 20LB | 9.0KG | 20LB | 9.0KG | 33LB | 14.9KG | 33LB | 14.9KG | 33LB | 14.9KG | 33LB | 14.9KG | 33LB | 14.9KG | 33LB | 14.9KG | 40LB | 18.1KG | 40LB | 18.1KG | 50LB | 22.6KG | 50LB | 22.6KG |
| MONO CAPACITY M/MM | 320/0.28 300/0.29 205/0.35 | 470/0.29 275/0.38 185/0.46 | 610/0.29 355/0.38 240/0.46 | 610/0.29 355/0.38 240/0.46 | 300/0.46 275/0.49 225/0.54 | 300/0.46 275/0.49 225/0.54 | 370/0.49 300/0.54 235/0.61 | 370/0.49 300/0.54 235/0.61 | 375/0.54 290/0.61 215/0.71 | 375/0.54 290/0.61 215/0.71 | 310/0.71 275/0.76 195/0.89 | 385/0.76 275/0.89 235/0.96 |
| MONO CAPACITY YD/LB | 350/8 325/10 220/12 | 515/10 300/15 200/20 | 670/10 390/15 260/20 | 670/10 390/15 260/20 | 330/20 300/25 245/30 | 330/20 300/25 245/30 | 405/25 330/30 255/40 | 405/25 330/30 255/40 | 410/30 315/40 235/50 | 410/30 315/40 235/50 | 340/50 300/60 215/80 | 420/60 300/80 260/100 |
| RECOVERY RATE | 32/14 | 32/14 | 38/19 | 38/19 | 38/19 | 38/19 | 38/19 | 38/19 | 50/16 | 50/16 | 50/16 | 41/16 |
| REEL SPOOL MATERIAL | ALUMINUM | ALUMINUM | ALUMINUM | ALUMINUM | ALUMINUM | ALUMINUM | ALUMINUM | ALUMINUM | ALUMINUM | ALUMINUM | ALUMINUM | ALUMINUM |
| WEIGHT | 15.8 OZ | 16.6 OZ | 18.7 OZ | 18.7 OZ | 20.1 OZ | 20.1 OZ |
Are you ready for some serious fishing with Avet HXW 5/2 Raptor Reels? This bad boy can handle massive catches like tuna and shark while still being compact. Whether you're jigging, bottom fishing, or trolling, the HXW Raptor's 40 lbs. at strike and 50 lbs. at full drag will have you reeling in anything that bites.
With its all metal body, eight ball bearings, and super smooth lever drag system, it's practically unstoppable. Don't let its diminutive size fool you, this reel packs a punch! Available in various colors, all you need is some braided line to unleash its full potential.
Pros:
- Great value
- Powerful lever drag
- Good speed in high gear
- Impressive cranking power in low gear
- Lightweight
Features:
- Features Our Patented, Powerful Dual Carbon Fiber Drag System Producing Twice The Drag Output Of Our Standard Series Reels
- Precision Machined 6061 T-6 Marine Grade Aluminum And Stainless Steel Components.
- Anodized For Superior Corrosion Resistance And Beautiful Finish.
- True One Piece Frame For The Ultimate In Strength Vs. Weight.
- Powerful Lever Drag System With Adjustable Strike Pre-Set.
- Precision Machined Stainless Steel Gears.
- Our Patented, Indestructible, SILENT Dog And Gear Anti-Reverse System, The Most Reliable In The Industry.
- Reliable Avedrag Dry Carbon Fiber Drags For Superior Stopping Power, Smoothness, And Wear Resistance.
- Up To 40 Lbs. At Strike, 50 Lbs. Full.
- 9 Related Stainless Steel Ball Bearings.
- Alarm Clicker.
- Offset Machined Handle Arm To Reduce Centerline Profile And Cranking Wobble.
- Large Comfortable Soft Touch Handle Knob.
- Matching Machined Aluminum Rod Clamp.
- Proudly Made In USA.
| Model | Line Class | Speed | Gear Ratio | Braided Line Capacity | Drag | Inches Per Crank | Weight |
| HXJ 5/2 Raptor | 50 -100 Lb. | TWO | H - 5.4:1 L - 1.9:1 |
80 Lb - 300 Yards | Strike: 40 Full: 50 |
H - 47 L - 17 |
27 oz. |
| HX 5/2 Raptor | 50 -100 Lb. | TWO |
H - 5.4:1 L - 1.9:1 |
80 Lb - 500 Yards |
Strike: 40 Full: 50 |
H - 47 L - 17 |
29 oz. |
| HXW 5/2 Raptor | 50 -100 Lb. | TWO |
H - 5.4:1 L - 1.9:1 |
100 Lb - 620 Yards |
Strike: 40 Full: 50 |
H - 47 L - 17 |
32 oz. |
Shimano SpeedMaster II 2-Speed Lever Drag Reels are all about power and performance. Anglers have been practically begging Shimano to come out with a lever drag reel at an incredible price and they have finally delivered. The SpeedMaster II is available in 4 sizes depending on the size of fish you are targeting. These two-speed reels are extremely powerful and are designed for nearshore and offshore fishing. It excels at bottom fishing in deep water as well as light trolling.
Shimano has a 5.7:1 and 1.3:1 gear ratios so you can really crank in big fish from deep water. The SpeedMaster II features an all metal body that is rigid and strong, and a powerful carbon drag system that puts out 40 lbs of drag at max. That is a lot of drag! Four ball bearings and a little Shimano engineering wizardry make this reel extremely smooth. If you're looking to buy a 2-speed bottom fishing reel or light trolling reel and you're a Shimano fan, buy a Shimano SpeedMaster II 2-Speed Lever Drag Reel. We think you're going to love it!
| MODEL | LOWER GEAR RATIO | LINE RETRIEVE PER CRANK | RETRIEVE | MONO LINE CAPACITY | MAX DRAG | GEAR RATIO | POWERPRO LINE CAPACITY | WEIGHT | BEARINGS |
|---|---|---|---|---|---|---|---|---|---|
| SPM12II | 3.1:1 | 42/23 | Right | 20/350, 25/280, 30/230 | 40 | 5.7:1 | 50/580, 65/400, 80/355 | 25.7 | 4 |
| SPM16II | 3.1:1 | 42/23 | Right | 20/440, 25/350, 30/300 | 40 | 5.7:1 |
50/750, 65/550, 80/450
|
26.5 | 4 |
| SPM20II | 2.3:1 | 52/23 | Right | 30/470, 40/320, 50/260 | 44 | 5.2:1 | 65/725, 80/575, 100/435 | 34.6 | |
| SPM25II | 2.3:1 | 52/23 | Right | 30/550, 40/420, 50/340 | 44 | 5.2:1 | 65/1010, 80/730, 100/470 | 36.2 |
The Daiwa Seagate Conventional Reel is an incredible reel considering the low price and great features. Boasting 20lbs of drag, this reel was designed with big, hard fighting fish in mind. The aluminum spool and light, yet strong, composite frame is perfect spending the entire day on the water.
We like this reel for several reasons. For the price, you just won't find a better, more reliable reel. The large handle and metal star drag is smooth and clicks when you turn it. The clicking is nice because it lets you know if you've accidentally turned the drag while on a fish and secures the star so it doesn't move under vibration from the boat. The incredible drag this puppy puts out is excellent allowing braid line to top shots that are far heavier than the designers intended. We spool it up with 65-80lb braid and top shots up to 80lbs which makes this reel a serious contender for bigger fish.
The castability is great with the Seagate and can be use for both a live bait rod and a jig stick. It's excellent for tuna, grouper, yellowtail, rockfish, white seabass, or any other medium to small game species. Pick one up today and get on the water!!!
| Model | Bearings | Ratio | Inches | oz | Mono | Braid | Drag |
| SGT20H | 3 CRBB + 1 | 6.1 : 1 | 35 | 14.3 | 12/420, 14/350, 20/210 | 40/330, 50/260 | 15.4 |
| SGT30H | 3 CRBB + 1 | 6.1 : 1 | 35 | 15 | 14/490, 20/295, 25/230 | 40/450, 50/370 | 15.4 |
| SGT35H | 3 CRBB + 1 | 6.4 : 1 | 48 | 20.4 | 20/300, 25/240, 30/200 | 50/390, 65/330 | 19.8 |
| SGT40H | 3 CRBB + 1 | 6.4 : 1 | 48 | 21.3 | 25/400, 30/270, 40/240 | 50/490, 65/430 | 19.8 |
| SGT50H | 3 CRBB + 1 | 6.4 : 1 | 48 | 21.9 | 30/350, 40/310, 50/220 | 80/460, 100/360 | 19.8 |
Avet MXL Raptor Series 2-Speed Lever Drag Reels
- Features Our Patented, Powerful Dual Carbon Fiber Drag System Producing Twice The Drag Output Of Our Standard Series Reels.
- Precision Machined 6061 T-6 Marine Grade Aluminum And Stainless Steel Components.
- Anodized For Superior Corrosion Resistance And Beautiful Finish.
- Patented M.C. Cast Control System.
- True One Piece Frame For The Ultimate In Strength Vs. Weight.
- Powerful Lever Drag System With Adjustable Strike Pre-Set.
- Precision Machined Stainless Steel Gears.
- Our Patented, Indestructible, SILENT Dog And Gear Anti-Reverse System, The Most Reliable In The Industry.
- Reliable Avedrag Dry Carbon Fiber Drags For Superior Stopping Power, Smoothness, And Wear Resistance.
- Up To 21 Lbs. At Strike, 31 Lbs. Full.
- 9 Related Stainless Steel Ball Bearings.
- Alarm Clicker.
- Offset Machined Handle Arm To Reduce Center Line Profile And Cranking Wobble.
- Large Comfortable Soft Touch Handle Knob.
- Matching Machined Aluminum Rod Clamp.
- Proudly Made In USA
The Shimano Trinidad is a name that resonates with all Saltwater Anglers. It has earned an impeccable reputation for power and reliability world wide. Shimano's quest to make the ultimate Trinidad A was no easy task. Lighter, smaller and more compact were the key physical characteristics and they were accomplished. The performance goal was to build the best casting reel in this category. We shattered our targets and have built a reel for casting which all others will be measured by.
Features
Unleash serious power in a compact design with the Avet HX Raptor 2-Speed Lever Drag Reel — the perfect reel for anglers who demand durability, high performance, and precision in every strike. Engineered for big game, trolling, vertical jigging, and saltwater fishing, this reel delivers exceptional drag control, smooth retrieve, and superior line capacity in a rugged package.
Avet HX Raptor 2-Speed Series Lever Drag Reels
- Features Our Patented, Powerful Dual Carbon Fiber Drag System Producing Twice The Drag Output Of Our Standard Series Reels
- Precision Machined 6061 T-6 Marine Grade Aluminum And Stainless Steel Components.
- Anodized For Superior Corrosion Resistance And Beautiful Finish.
- True One Piece Frame For The Ultimate In Strength Vs. Weight.
- Powerful Lever Drag System With Adjustable Strike Pre-Set.
- Precision Machined Stainless Steel Gears.
- Our Patented, Indestructible, SILENT Dog And Gear Anti-Reverse System, The Most Reliable In The Industry.
- Reliable Avedrag Dry Carbon Fiber Drags For Superior Stopping Power, Smoothness, And Wear Resistance.
- Up To 40 Lbs. At Strike, 50 Lbs. Full.
- 9 Related Stainless Steel Ball Bearings.
- Alarm Clicker.
- Offset Machined Handle Arm To Reduce Centerline Profile And Cranking Wobble.
- Large Comfortable Soft Touch Handle Knob.
- Matching Machined Aluminum Rod Clamp.
- Proudly Made In USA.
| Model | Line Class | Gear Ratio | Braid | Drag | IPC |
|
HXJ 5/2 Raptor |
50 -100 Lb. | H - 5.4:1 L - 1.9:1 |
80 Lb - 300 Yds | Strike: 40 Full: 50 |
H - 47 L - 17 |
|
HX 5/2 Raptor |
50 -100 Lb. |
H - 5.4:1 L - 1.9:1 |
80 Lb - 500 Yds |
Strike: 40 Full: 50 |
H - 47 L - 17 |
|
HXW 5/2 Raptor |
50 -100 Lb. |
H - 5.4:1 L - 1.9:1 |
100 Lb - 620 Yds |
Strike: 40 Full: 50 |
H - 47 L - 17 |
Avet LX Raptor Series 2-Speed Reels
- Features Our Patented, Powerful Dual Carbon Fiber Drag System Producing Twice The Drag Output Of Our Standard Series Reels.
- Precision Machined 6061 T-6 Marine Grade Aluminum And Stainless Steel Components.
- Anodized For Superior Corrosion Resistance And Beautiful Finish.
- True One Piece Frame For The Ultimate In Strength Vs. Weight.
- Powerful Lever Drag System With Adjustable Strike Pre-Set.
- Precision Machined Stainless Steel Gears.
- Our Patented, Indestructible, SILENT Dog And Gear Anti-Reverse System, The Most Reliable In The Industry.
- Reliable Avedrag Dry Carbon Fiber Drags For Superior Stopping Power, Smoothness, And Wear Resistance.
- Up To 28 Lbs. Of Drag At Strike, 38 Lbs. Full
- 9 Related Stainless Steel Ball Bearings.
- Alarm Clicker.
- Offset Machined Handle Arm To Reduce Centerline Profile And Cranking Wobble.
- Large Comfortable Soft Touch Handle Knob.
- Matching Machined Aluminum Rod Clamp.
- Proudly Made In USA.
All models are right hand unless specified otherwise.
Avet SX Raptor Series 2-Speed Lever Drag Reels feature Avet's patented, powerful Dual carbon fiber drag system producing Twice the drag output of Avet's standard series reels. Avet's conventional lever drag reels are precision machined 6061 T-6 marine grade aluminum and stainless steel components. Anodized for superior corrosion resistance and beautiful finish. The Avet SX Raptor Series 2-Speed Lever Drag Reels are a true one piece frame for the ultimate in strength vs. weight. With a powerful lever drag system with an adjustable strike pre-set. The SX Raptor series have up to 17 lbs. at strike, 26 lbs. full.
Features:
- Avet's patented M.C. Cast Control System.
- Precision machined stainless steel gears.
- Indestructible, SILENT dog and gear anti-reverse system, the most reliable in the industry.
- Reliable Avedrag dry carbon fiber drags for superior stopping power, smoothness, and wear resistance.
- 9 stainless steel ball bearings.
- Alarm clicker.
- Offset machined handle arm to reduce centerline profile and cranking wobble.
- Large comfortable soft touch handle knob.
- Matching machined aluminum rod clamp.
- Proudly made in USA.
Line Capacity:
Mono: 300/25, 220/30 (yd/lb)
Braid: 880/40, 630/50, 420/65, 330/80 (yd/lb)
If you are looking for a powerful, lightweight, and durable two speed reel, the Avet JX Raptor might be the perfect match. This reel is made of billet aluminum and uses the highest quality components to give you a very powerful reel that will land big fish.
The Raptor series reels have great cast ability and the Magic Cast dial will help you cast further with fewer backlashes. The increased drag in the Raptor and the use of braided line with a top shot will allow you to hook and boat fish you would have never thought possible with a smaller reel.
The handle is very comfortable and has excellent grip for when your hands are wet or slippery. Check out the many sizes of Avet Raptor 2 speed reels, there is one sure to match your fishing needs.
- Features a Patented, Powerful Dual Carbon Fiber Drag System Producing Twice The Drag Output Of Our Standard Series Reels.
- Precision Machined 6061 T-6 Marine Grade Aluminum And Stainless Steel Components.
- Anodized For Superior Corrosion Resistance And Beautiful Finish.
- True One Piece Frame For The Ultimate In Strength Vs. Weight.
- Powerful Lever Drag System With Adjustable Strike Pre-Set.
- Precision Machined Stainless Steel Gears.
- Our Patented, Indestructible, SILENT Dog And Gear Anti-Reverse System, The Most Reliable In The Industry.
- Reliable Avedrag Dry Carbon Fiber Drags For Superior Stopping Power, Smoothness, And Wear Resistance.
- Up To 28 Lbs. At Strike, 38 Lbs. Full.
- 8 Stainless Steel Ball Bearings.
- Alarm Clicker.
- Offset Machined Handle Arm To Reduce Centerline Profile And Cranking Wobble.
- Large Comfortable Soft Touch Handle Knob.
- Light, Narrow Spool Design For Optimal Jig Casting Efficiency And Less Line Leveling While Retrieving.
- Matching Machined Aluminum Rod Clamp.
- Proudly Made In USA.
Avet MXJ RAPTOR Series Lever Drag Reels
- Precision Machined 6061 T-6 Marine Grade Aluminum And Stainless Steel Components.
- Anodized For Superior Corrosion Resistance And Beautiful Finish.
- Re-Designed, True One Piece Frame For The Ultimate In Strength Vs. Weight.
- Powerful Lever Drag System With Adjustable Strike Pre-Set.
- Ratcheting Glide Plate, And Strike Stop Button (OPTIONAL )
- Precision Machined Stainless Steel Gears.
- Our Patented, Indestructible, SILENT Dog And Gear Anti-Reverse System, The Most Reliable In The Industry, Re-Designed With More Engagement Teeth To Reduce Handle Back-Play.
- Reliable Avedrag Dry Carbon Fiber Drags For Superior Stopping Power, Smoothness, And Wear Resistance.
- Re-Designed, Loud Alarm Clicker
- Offset Machined Handle Arm To Reduce Centerline Profile And Cranking Wobble.
- Large Comfortable Soft Touch Handle Knob.
- Raptor Series: 9 Related Stainless Steel Ball Bearings.
- Proudly Made In USA.
- Features Our Patented, Powerful Dual Carbon Fiber Drag System.
- Patented M.C. Cast Control System.
The Avet JX G2 Lever Drag Reel is one of the most versatile sizes due to the line capacity, drag, narrow spool, and excellent performance. The reel is a little taller than the MX series reel which increases the line capacity but it also does several other things. The taller narrower spool makes it easier to put the line back on since you don't have to go from side to side as far. It also increases the inches per crank since the spool is taller, more line comes in with each crank. That taller spool however doesn't decrease the torque enough to make it noticeable.
I really like this reel for vertical fishing since it does have that taller spool. For the fishing I do, I don't really use this reel for casting but it does cast well. The MC Cast control knob uses magnets to slow the spool down and has 5 settings. Number 1 gives you the lest control and number 5 the most. Slowing the spool down under the cast helps prevents back lashes (birds nest) will actually let you cast farther, especially if you're new to casting a conventional reel.
I really like this reel for vertical fishing since it does have that taller spool. For the fishing I do, I don't really use this reel for casting but it does cast well. The MC Cast control knob uses magnets to slow the spool down and has 5 settings. Number 1 gives you the lest control and number 5 the most. Slowing the spool down under the cast helps prevents back lashes (birds nest) will actually let you cast farther, especially if you're new to casting a conventional reel.
Having the 2 speed option is great for several reasons. If you have a sizable fish on and it is doing circles under the boat, it can be difficult to bring it in since you're fighting the resistance of the fish horizontal to the boat. Putting the reel in low gear brings it in slower but increases the amount of torque you have. Rest the rod and the rail and slowly crank it in.
Avet JX G2 LEVER DRAG CASTING REEL
- Precision machined 6061 T-6 marine grade aluminum and stainless steel components.
- Anodized for superior corrosion resistance and beautiful finish.
- Re-designed, True one piece frame for the ultimate in strength vs. weight.
- Powerful lever drag system with adjustable strike pre-set ratcheting glide plate, and strike stop button.
- Precision machined stainless steel gears.
- Our patented, indestructible, SILENT dog and gear anti-reverse system, the most reliable in the industry, re-designed with more engagement teeth to reduce handle back-play.
- Reliable Avedrag dry carbon fiber drags for superior stopping power, smoothness, and wear resistance.
- 40% more drag output than our Classic Series, Up to 12 lbs. of drag at strike, 20 lbs. full.
- 8 stainless steel ball bearings.
- Re-designed, loud Alarm clicker.
- Offset machined handle arm to reduce centerline profile and cranking wobble.
- Large comfortable soft touch handle knob.
- Matching machined aluminum rod clamp.
- Proudly made in USA.
SPECIFICATIONS
| SPEED | 2-Speed | LINE CLASS | 25-50 Lb. |
|---|---|---|---|
| JERRY BROWN - LINE ONE BRAID | 65 Lb. - 400 Yards | MAXIMUM DRAG (LBS.) |
Strike: 21 Full: 28 |
| INCHES PER CRANK |
H - 46 L - 22 |
HARNESS LUGS | None |
| SPOOL WIDTH (IN.) | 2" |
GEAR RATIO | |
| CRANK HANDLE | REEL DIAMETER (IN.) | 2-3/4" | |
| WEIGHT (OZ.) | 23 |
FRAME | Vaires |
Avet SXJ Raptor Series 2-Speed Lever Drag Reels feature Avet's patented, powerful Dual carbon fiber drag system producing Twice the drag output of Avet's standard series reels. Avet's conventional lever drag reels are precision machined 6061 T-6 marine grade aluminum and stainless steel components. Anodized for superior corrosion resistance and beautiful finish. The Avet SXJ Raptor Series 2-Speed Lever Drag Reels are a true one piece frame for the ultimate in strength vs. weight. With a powerful lever drag system with an adjustable strike pre-set. The SXJ Raptor series have up to 17 lbs. at strike, 26 lbs. full.
Features:
- Avet's patented M.C. Cast Control System.
- Precision machined stainless steel gears.
- Indestructible, SILENT dog and gear anti-reverse system, the most reliable in the industry.
- Reliable Avedrag dry carbon fiber drags for superior stopping power, smoothness, and wear resistance.
- 9 stainless steel ball bearings.
- Alarm clicker.
- Offset machined handle arm to reduce centerline profile and cranking wobble.
- Large comfortable soft touch handle knob.
- Matching machined aluminum rod clamp.
- Proudly made in USA.
Line Capacity Braid (yds/lb): 350/20 • 300/30 • 230/50
Unmatched Power, Precision, and Performance for Serious Saltwater Anglers.
The Shimano Torium A Star Drag Reel delivers incredible cranking power and smooth performance in a lightweight, compact frame. Built for offshore, bottom, and jigging applications, this reel handles everything from tuna and grouper to snapper and amberjack with ease.
Key Features:
-
Star Drag System – Provides smooth, consistent drag pressure under heavy loads.
-
High-Efficiency Gearing (HEG) – Maximizes torque for effortless retrieves.
-
Lightweight Aluminum Frame – Strong, corrosion-resistant, and compact.
-
Saltwater-Ready Construction – Withstands harsh offshore environments.
-
High Gear Ratio Options – Delivers speed and power for a range of techniques.
-
Ideal for offshore, bottom, and jigging setups.
Whether you’re dropping deep jigs, bottom fishing for grouper, or chasing fast-moving pelagics, the Shimano Torium A offers the power and reliability you need.
| Model | Shimano Torium A Star Drag Conventional Reel |
|---|---|
| Series | Torium A |
| Reel Type | Conventional Star Drag |
| Retrieve | Right-Hand (select models also in Left-Hand) |
| Frame Material | Diecast Aluminum |
| Gear Ratio | 6.2:1 (varies by model) |
| Max Drag | 24–27 lbs (depending on size) |
| Line Retrieve per Crank | Up to 46 inches |
| Bearings | 3+1 Shielded A-RB Bearings |
| Line Capacity (Mono) | 20 lb / 420 yds (Torium 20A) |
| Line Capacity (Braid) | 50 lb / 580 yds (Torium 20A) |
| Weight | 19.0 oz (Torium 20A) |
| Drag Type | Star Drag System |
| Usage | Saltwater, Offshore, Bottom Fishing, Jigging |
| Warranty | 1-Year Limited Warranty |
The Penn International 2 Speed VISX Silver Reel is designed and manufactured in the USA of domestic and imported components. Precision machined from high-strength, lightweight, aircraft grade aluminum in our Philadelphia machining center. Our experienced crew has been designing and producing durable, high-quality reels in this facility since 1932. The VI consists of a large stainless steel gear train for strength and speed, and a Dura-Drag system which results in a smoother start up and virtually eliminates hesitation, even under extreme drag settings.
- Machined and anodized aluminum body and side-plates
- Stainless steel main and pinion gears
- Quick-Shift II™ 2-speed system
- Dura-Drag™ system
- Versa-Strike Adjustable Strike stop
- Double-dog ratchet anti-reverse
- Line Capacity Rings
- Made in the USA of domestic and imported components
| MODEL NUMBER | INT12VISXS | INT16VISXS | INT20VISXS | INT30VISXS | INT50VISXS |
|---|---|---|---|---|---|
| SKU | 1419187 | 1419229 | 1419230 | 1419232 | 1419234 |
| BEARING COUNT | 5 | 5 | 5 | 5 | 5 |
| BRAID CAPACITY M/MM | 1465/0.29 1105/0.36 900/0.38 | 810/0.39 700/0.49 600/0.51 | 685/0.51 570/0.64 420/0.72 | 825/0.51 685/0.64 505/0.72 | 1215/0.51 1010/0.64 745/0.72 |
| BRAID CAPACITY YD/LB | 985/40 840/50 700/65 | 890/65 765/80 655/100 | 750/100 625/130 460/200 | 905/100 750/130 555/200 | 1330/100 1105/130 815/200 |
| DRAG MATERIAL | Dura Drag | Dura Drag | Dura Drag | Dura Drag | Dura Drag |
| GEAR RATIO | 5.1:1 / 1.8:1 | 4.6:1 / 1.6:1 | 4.1:1 / 1.4:1 | 4.1:1 / 1.4:1 | 3.5:1 / 1.3:1 |
| MAX DRAG LB | 40lb | 18.1kg | 45lb | 20.4kg | 50lb | 22.6kg | 55lb | 24.9kg | 60lb | 27.2kg |
| MONO CAPACITY M/MM | 130/0.20 110/0.23 80/0.25 | 680/0.46 505/0.54 260/0.76 | 450/0.61 335/0.71 295/0.76 | 540/0.61 400/0.71 355/0.76 | 795/0.61 590/0.71 525/0.76 |
| MONO CAPACITY YD/LB | 1510/10 1030/12 880/15 | 745/20 555/30 280/60 | 490/40 365/50 325/60 | 590/40 440/50 390/60 | 870/40 645/50 575/60 |
| RECOVERY RATE | 40/14 | 40/14 | 41/14 | 41/14 | 40/15 |
| WEIGHT | 32 oz | 36 oz | 51 oz | 53 oz | 63 oz |
The completely redesigned Dawia Saltiga 2-Speed Lever Drag Reel series features the smoothest, most powerful and dependable lever-drag reels available today. Six single-speed models, Seven 2-speed models, plus Two special-purpose tournament style sailfish single speed designs cover all the bases for saltwater anglers from inshore and near shore to offshore and the canyons.
All Daiwa Saltiga LD reels feature a one-piece machined aluminum frame and side plate to assure precise alignment of bearings and gears for amazingly smooth performance, less flex, more power and reduced binding even during the fiercest battles. Oversized, super-hard, polished and meshed stainless steel main and pinion gears fit together perfectly to drive the kicking gear with extra strength and nearly silent precision while large spool bearings reduce side load so anglers can concentrate on fighting fish rather than the reel.
| Model | Bearings | Gear Ratio | Low Gear Ratio | Line Per Turn | Line Per Low Gear Turn | Weight (oz) | Mono Capacity | J Braid Capacity | Drag Max Strike |
| SALTIGA® LEVER DRAG 2-SPEED SAGLD15-2SPD | 6CRBB | 6.3 | 3.1 | 39.9 | 19.1 | 18.2 | 12/310, 14/270 | 30/330, 40/260 | 15.5/26 |
| SALTIGA® LEVER DRAG 2-SPEED SAGLD20-2SPD | 6CRBB | 6.3 | 3.1 | 39.9 | 19.1 | 18.8 | 14/350, 20/210 | 40/330, 50/260 | 15.5/26 |
| SALTIGA® LEVER DRAG 2-SPEED SAGLD35-2SPD | 6CRBB | 5.8 | 3.1 | 42.8 | 22.6 | 24.7 | 20/300, 25/240 | 65/330, 80/230 | 28.6/40 |
| SALTIGA® LEVER DRAG 2-SPEED SAGLD40-2SPD | 6CRBB | 5.8 | 3.1 | 42.8 | 22.6 | 26.3 | 25/400, 30/270 | 65/480, 80/350 | 28.6/40 |
| SALTIGA® LEVER DRAG 2-SPEED SAGLD50-2SPD | 6CRBB | 5.8 | 3.1 | 45.6 | 24.1 | 29.8 | 20/640, 30/440 | 65/610, 80/460 | 28.6/40 |
| SALTIGA® LEVER DRAG 2-SPEED SAGLD55-2SPD | 6CRBB | 5.2 | 2.3 | 46.3 | 20.6 | 37 | 30/440, 40/340 | 80/550, 100/440 | 33.1/45 |
| SALTIGA® LEVER DRAG 2-SPEED SAGLD60-2SPD | 6CRBB | 5.2 | 2.3 | 46.3 | 20.6 | 38.4 | 30/550, 40/420 | 80/660, 100/550 | 33.1/45 |
Features:
ATD-DRAG: Daiwa’s Automatic Tournament Drag uses an improved drag grease that exhibits a low viscosity at rest, yet becomes more viscous immediately after drag start up. This reduces initial drag start-up inertia and combined with the structural changes of the ATD Drag System results in a smoother drag from the initial hook up.
CRBB: Lasting 12 times longer than standard stainless steel bearings Daiwa’s CRBBs feature specially treated stainless steel, and a protective shield on the bearing race that seals out sand, fine grit, salt crystals and other abrasives. The result is a longer lasting bearing that’s protected from the corrosive elements that destroy traditional bearings.
DIGIGEAR: Daiwa’s first generation of digitally engineered gear design ensures a perfect mesh between ultra-tough alloy drive gears and marine bronze pinion gears for optimized speed, power, durability and smoothness.
Saltiga Executive 5 Year Warranty & Service
Daiwa protects your investment with an exceptional plan for our Saltiga reel owners. When purchasing a Saltiga reel you will receive the finest service warranty and experience in the industry. Listed below are the service/warranty incentives exclusive to your Saltiga purchase.
Your Saltiga purchase includes a 5-year Limited Warranty against manufacturing defects and a FREE 5 Year Clean and Service!
-
Executive Saltiga 5 Year Limited Warranty against manufacturing defects with proof of purchase.
- Reels being repaired will receive expedited service pending parts availability
- FREE expedited return shipping (2nd Day Air or Priority Mail)
- If the damage is determined to not be warranty eligible (missing parts, accidental damage, misuse, inadequate care, wear and tear) we will contact you with a price estimate before starting any work.
-
FREE 5 Year Clean and Service for original owner with proof of purchase
- Reels being cleaned and serviced will be shipped back in a special Saltiga signature bag within 1 Business Day upon arrival to our Daiwa Service Department
- FREE expedited return shipping (2nd Day Air or Priority Mail)
- If the damage is determined to be excessive upon inspection, (missing parts, accidental damage, misuse, inadequate care) we will contact you with a price estimate before starting any work.
*This applies to all US model Saltiga reels with valid proof of purchase (2020 Saltiga Spinning, 2020 Saltiga LD and all previous models of Saltiga spinning and Star Drag reels with valid proof of purchase)
Showing 16/53