Saltwater Casting Reels & Gear

A low-profile baitcasting reel built around an aluminum CT (Compact & Tough) frame, the Daiwa Fuego CT 100 delivers durability and performance at an accessible price point. The aluminum CT frame provides the rigidity needed for precise gear mesh and long-term durability, while the Air Rotation system delivers a silky-smooth, effortless retrieve by reducing rotor weight and rotational inertia. 

What sets the Fuego CT apart is the MagForce Z cast control system — a centrifugal-magnetic hybrid that automatically adjusts braking force throughout the cast. As the cast begins, the spool's inductor cup retracts from the magnets for lightning-fast spool start-up with no magnetic drag. As the spool approaches maximum speed, the inductor cup automatically moves into the magnet gap to apply smooth magnetic braking and prevent overrun. As the spool slows, the cup retracts again — allowing the spool to keep spinning longer, unhampered by magnetic braking. The result is longer, more manageable casts with dramatically reduced backlash risk.

Key Features

• MagForce Z Cast Control — Centrifugal-magnetic hybrid system automatically adjusts braking force throughout the cast; lightning-fast spool start-up, smooth mid-cast braking, and extended spool spin-down for maximum casting distance with minimal backlash.
• Aluminum CT (Compact & Tough) Frame — Rigid aluminum frame provides the structural integrity needed for precise gear mesh and long-term durability; more rigid than graphite frames at this price point.
• UT Drag (Ultimate Tournament Carbon Drag) — Oversized carbon drag washers deliver maximum fish-stopping power; consistent, smooth drag pressure for confident fish fighting.
• Air Rotation — Reduced rotor weight and rotational inertia for a silky-smooth, effortless retrieve; improves sensitivity and reduces fatigue during extended casting sessions.
• Low-Profile Design — Compact, ergonomic low-profile body sits comfortably in the palm for all-day casting without fatigue.
• Three Gear Ratios — H (high), HS (high-speed), and XS (extra-speed) to match your technique and preferred retrieve speed.
• Right & Left Hand Available — Multiple models available in both right-hand and left-hand retrieve.

Model Selection Guide

• FGCT100H — High (Right Hand): Standard high gear ratio for versatile freshwater bass applications; covers a wide range of techniques from slow-rolling swimbaits to moderate-speed retrieves.
• FGCT100HL — High (Left Hand): Same high gear ratio as the 100H for left-hand retrieve anglers.
• FGCT100HS — High-Speed (Right Hand): Faster gear ratio for burning lures, fast topwater, and applications where increased line recovery speed is needed.
• FGCT100HSL — High-Speed (Left Hand): Same high-speed performance as the 100HS for left-hand retrieve anglers.
• FGCT100XS — Extra-Speed (Right Hand): Maximum gear ratio for the fastest possible retrieve; ideal for burning lures, fast topwater, and situations where maximum line recovery speed is critical.

Best For

• Freshwater Bass — Aluminum CT frame, MagForce Z cast control, and three gear ratios cover the full range of freshwater bass techniques from finesse to power applications.
• Versatile Casting Applications — MagForce Z's automatic braking adjustment makes the Fuego CT forgiving across a wide range of lure weights without manual brake adjustment.
• Left-Hand Retrieve Anglers — 100HSL and 100HL left-hand models available for anglers who prefer left-hand retrieve on baitcasting reels.
• Value-Conscious Anglers — Aluminum CT frame, MagForce Z, and UT carbon drag at $129.99 deliver premium technology at an accessible price point.

The PENN Squall Low Profile Baitcasting Reels deliver legendary PENN durability in a compact, ergonomic design built for serious saltwater and freshwater anglers. Engineered with a full metal body and precision-machined brass gears, these reels provide the structural integrity and smooth performance needed to handle hard-fighting fish in demanding conditions.

At the core of the Squall LP is a robust 5+1 stainless steel bearing system that ensures smooth, corrosion-resistant operation cast after cast. The HT-100™ drag system delivers consistent stopping power, while the magnetic casting brake provides precise cast control to reduce backlash and improve accuracy. Line capacity rings on the aluminum spool make it easy to monitor remaining line during long fights.

Available in three sizes (200, 300, 400) with both standard and high-speed gear ratios, the Squall LP series offers versatility for everything from inshore casting to freshwater bass fishing. Left-hand retrieve models are available in standard gear ratios, giving anglers the flexibility to match their preferred fishing style.

Key Features:

• Full Metal Body: Provides maximum strength and precise gear alignment under heavy loads
• 5+1 Stainless Steel Bearing System: Ensures smooth, corrosion-resistant performance in saltwater and freshwater
• HT-100™ Drag System: Delivers powerful, consistent drag pressure for landing trophy fish
• Magnetic Casting Brake: Provides precise cast control and reduces backlash for improved accuracy
• Machined Brass Gears: Heavy-duty drivetrain built for power, smoothness, and long-term durability
• Line Capacity Rings: Visual indicators on spool help monitor remaining line during fights
• Instant Anti-Reverse: Eliminates rotor backplay for solid hooksets
• Aluminum Spool: Lightweight, durable construction with excellent line capacity
• Star Drag System: Smooth, precise drag adjustment for fighting fish

Whether you're targeting calico bass, white seabass, or freshwater species, the PENN Squall Low Profile Baitcasting Reels deliver the performance and reliability you need at an exceptional value.

Specifications

Line Capacity

Tournament-tough quality and superb dependability, the Shimano Curado 300 Casting Reel is for anglers who aren’t just chasing fish but those targeting quality over quantity. Incorporating a deep 300-size spool intended for heavy-pound line and the needed capacity for extra-long casts, the Curado 300 features a long handle with wide-grip knobs to provide anglers with the extra power that’s necessary when pulling on big fish.

At the backbone of the Shimano Curado 300 lies its rigid HAGANE Body that prevents flex when that giant finally decides to commit. Available in two gear-ratio options — a standard 4.7:1 and an HG 6.6:1 — the Curado 300 allows anglers to find the right reel to match their fishing style and needs. Engineered with power in mind, the standard 4.7:1 model pulls double-duty for anglers fishing slower, methodical presentations, or when fishing with Alabama rigs or magnum crank baits.

The HG’s 6.6:1 gear ratio provides a slightly faster retrieve and is ideal for anglers aggressively working baits or for quickly picking up topwater slack. Built to fish big baits for big fish, Shimano created the Curado 300 to perform and never back down.

Features:

Inshore anglers need no longer worry about baitcaster durability. The Shimano Tranx 200 Baitcast Reel represents the culmination of more than 10 years' study on the effects and prevention of corrosion. With advanced CoreProtect construction, the Tranx 200's body is impervious to saltwater, while additional technologies – including S-ARB Shielded Anti-Rust bearings and the rubber-gasketed Waterproof Drag system – further protect key internals from environmental degradation.

The Tranx 200 also boasts a number of high-performance features that bode well for anglers targeting inshore beasts. The all-metal HGN Hagane Body design translates to ultimate strength and rigidity, for maximum cranking power under heavy load; the S3D Shimano Stable Spool Design incorporates a thin, solid aluminum wall for smooth running on both the cast and retrieve.

• Super-durable, low-profile baitcaster
• Ideally suited for inshore use
• Saltwater-safe CoreProtect body
• S-ARB Shielded Anti-Rust bearings 
• Gasketed Waterproof Drag system
• All-metal HGN Hagane Body design 
• S3D Shimano Stable Spool Design
• High-efficiency 3+1 bearing system
• External-adjust SVS Infinity Brake
• Wide-ranging Cross Carbon Drag 
• Up to 13 lbs. of max drag 

The PENN Fathom Low Profile Casting Reels deliver uncompromising power and precision for serious saltwater anglers targeting hard-fighting species. Engineered with a full metal body and sideplate, these reels provide the structural rigidity needed to handle trophy fish while maintaining a compact, ergonomic profile that reduces fatigue during long days on the water.

At the heart of the Fathom LP is a robust drivetrain featuring a brass main gear and bearing-supported bronze pinion that delivers smooth, reliable cranking power under extreme loads. The HT-100™ drag system provides consistent stopping power, while the TiN-coated levelwind system resists corrosion and wear even under high drag settings. The 400 size features an exclusive synchronized drag and levelwind system for enhanced durability during intense battles.

Available in three sizes (200, 300, 400) with both standard and high-speed gear ratios, the Fathom LP series offers versatility for everything from jigging and bottom fishing to casting lures and live bait. Left-hand retrieve models are available in standard gear ratios.

Key Features:

• Full Metal Body & Sideplate: Provides maximum strength and precise gear alignment under heavy loads
• 6+1 Stainless Steel Bearing System: Ensures smooth, corrosion-resistant performance in saltwater conditions
• HT-100™ Drag System: Delivers powerful, consistent drag pressure for landing trophy fish
• TiN-Coated Levelwind System: Titanium nitride coating resists wear and corrosion for long-term reliability
• Dual Action Casting Brake: Combines magnetic and centrifugal braking for precise cast control and reduced backlash
• Brass Main Gear & Bronze Pinion: Heavy-duty drivetrain built for power and durability
• Synchronized Drag & Levelwind (400 size): Advanced system enhances durability under extreme drag settings
• Instant Anti-Reverse: Eliminates rotor backplay for solid hooksets
• Aluminum Spool: Lightweight, durable construction with excellent line capacity

Whether you're targeting yellowtail, white seabass, calico bass, or other hard-fighting saltwater species, the PENN Fathom Low Profile Casting Reels deliver the performance and reliability you need to land fish of a lifetime.

Specifications

Line Capacity

The battle-tested Lexa line has been upgraded and reintroduced as the Daiwa Lexa HD Casting Reel — built specifically for the rigors of big bait fishing where standard baitcasters fall short. A completely redesigned heavy-duty clutch system handles the demands of large swimbaits, heavy jigs, and big bait presentations that stress conventional clutch mechanisms. Paired with an all-grease bearing system for smooth, silent operation without sacrificing freespool or casting distance, stainless steel drive and pinion gears for long-term durability, and Magforce cast control for precise, adjustable braking. Available in 300 size (22 lb drag, $319.99) and 400 size (25 lb drag, $389.99) across multiple gear ratios and both right and left hand retrieve.

Key Features

• Redesigned Heavy-Duty Clutch System — Clutch mechanism specifically engineered for big bait fishing; handles the sustained stress of large swimbaits, heavy jigs, and big bait presentations that cause premature wear and failure in standard baitcaster clutch systems.
• All-Grease Bearing System — Full grease bearing system keeps the reel running smooth and silent without sacrificing freespool or casting distance; grease lubrication provides long-term bearing protection in heavy-use applications.
• Stainless Steel Drive Gear & Pinion Gear — Stainless steel main and pinion gears for maximum durability and corrosion resistance; maintains smooth, precise gear mesh under heavy drag loads and sustained big bait fishing pressure.
• 6CRBB + 1RB Bearing System — 6 corrosion-resistant ball bearings plus 1 roller bearing; CRBB placement at key load and exposure points for long-term smooth operation.
• UTD (Ultimate Tournament Carbon Drag) — Up to 22 lb max drag on 300 size and 25 lb max drag on 400 size; carbon drag washers for smooth, consistent drag pressure from the initial hookset through the full fight.
• Magforce Cast Control — Magnetic cast control system provides precise, adjustable braking for a wide range of lure weights and casting conditions; reduces backlash without sacrificing casting distance.
• Aluminum Frame & Side Plate (Gear Side) — Aluminum frame and gear-side side plate for precise bearing and gear alignment under load; reduces flex and binding during heavy drag applications.
• Swept Handle with Weight-Reducing Cutouts — Extended counterbalanced swept handle with machined cutouts for reduced weight and maximum power and torque; 100mm handle on 300 size, 120mm handle on 400 size.
• EVA Custom Handle Knob — EVA foam handle knob for comfortable grip during extended casting and retrieves; resists water absorption and maintains grip in wet conditions.

Product Specifications

Model Selection Guide

• 300 Size (22 lb drag, 12.3 oz) — Lighter, more compact platform for freshwater big bait applications; 12/240 mono or 30/240 braid capacity for swimbaits, large jigs, and heavy presentations in freshwater and light inshore applications. 100mm handle.
• 400 Size (25 lb drag, 17.1 oz) — Larger platform with more line capacity (17/245 mono, 40/300 braid) and 3 additional pounds of max drag for heavier big bait applications, calico bass on large swimbaits, and inshore saltwater use. 120mm handle.
• H (6.3:1) — Standard Retrieve — Balanced gear ratio for big bait fishing where a moderate retrieve speed is preferred; best for slow-rolling large swimbaits and heavy jigs where retrieve speed control is critical.
• HS/HSL (7.1:1–7.4:1) — High Speed — Fast retrieve for burning swimbaits, covering water quickly, and fast line recovery after long casts; HSL = left hand retrieve.
• XS (8.1:1) — Extra High Speed — Maximum retrieve speed for burning presentations and fast line recovery; best for techniques requiring the fastest possible retrieve or for anglers who prefer to slow down a fast reel rather than speed up a slow one.
• PWR (5.1:1) — Power Retrieve (400 only) — Lowest gear ratio for maximum cranking torque; best for deep-diving crankbaits, heavy bottom contact presentations, and situations where maximum power is needed to turn large fish away from structure.

Best For

• Big Bait Fishing — Heavy-duty clutch system and stainless steel gears are the defining advantage for large swimbait fishing; handles the sustained stress of 3–8 oz swimbaits that cause premature wear in standard baitcasters.
• Calico Bass — 400 size with 25 lb drag and 40–65 lb braid capacity for calico bass on large swimbaits and heavy jigs; Magforce cast control for precise casting accuracy around structure.
• Freshwater Bass — 300 size for freshwater bass on large swimbaits, heavy jigs, and big bait presentations; 22 lb drag and 30–40 lb braid capacity for heavy cover applications.
• Heavy Jig Fishing — UTD carbon drag and stainless steel gears handle the sustained pressure of heavy jig fishing; PWR model (5.1:1) for maximum torque when working heavy jigs in deep water or strong current.

Built specifically for saltwater inshore and coastal applications, the Daiwa Coastal SV TW 80 combines the casting versatility of the SV TW (Stress-free Versatile T-Wing System) spool with the full Hyper Drive Design platform for a low-profile baitcaster that handles the widest possible range of lure weights with minimal backlash and maximum casting distance. The SV TW spool's shallow, wide design reduces spool weight and rotational inertia for effortless casting of light to medium lures — the T-Wing System line guide further reduces line friction on the cast for longer, more accurate presentations. At just 6.5 oz, it is one of the lightest saltwater-capable low-profile baitcasters in the Daiwa lineup.

The Hyper Drive Design platform integrates four key technologies — HyperDrive Digigear, Hyper Double Support, Hyper Armed Housing, and Hyper Tough Clutch — for a gear system that is smoother, more powerful, and more durable than conventional baitcasting reel designs. The UTD (Ultimate Tournament Drag) system uses impregnated drag discs that are approximately 30 times more durable than conventional discs, delivering more effective drag power with significantly reduced start-up inertia. Available in right and left hand at $319.99.

Key Features

• SV TW (Stress-free Versatile T-Wing System) Spool — Shallow, wide spool reduces rotational inertia for effortless casting of light to medium lures with minimal backlash; T-Wing System line guide reduces line friction on the cast for longer, more accurate presentations across a wide range of lure weights.
• HyperDrive Digigear — Redesigned gear tooth profile transfers power more efficiently for a smoother, more powerful retrieve with reduced gear noise compared to conventional gear designs.
• Hyper Double Support — Two-bearing support system for the pinion gear eliminates flex under load for an ultra-smooth retrieve and precise gear rotation at all retrieve speeds.
• Hyper Armed Housing — Aluminum frame and side plate provide maximum rigidity for precise internal component alignment and long-term durability in saltwater environments.
• Hyper Tough Clutch — Redesigned and reinforced clutch mechanism increases durability and engagement reliability for consistent performance over extended use.
• UTD (Ultimate Tournament Drag) — Impregnated drag discs approximately 30 times more durable than conventional discs; delivers more effective drag power with significantly reduced start-up inertia for smooth, consistent drag from the first moment of hookup.
• 4CRBB + 1 Bearing System — 4 corrosion-resistant ball bearings plus 1 roller bearing; CRBB placement at key saltwater exposure points for long-term durability in inshore and coastal saltwater environments.
• 6.5 oz Lightweight — One of the lightest saltwater-capable low-profile baitcasters in the Daiwa lineup; reduces fatigue during extended casting sessions.

Product Specifications

Best For

• Calico Bass & Inshore Saltwater — SV TW spool handles the wide range of lure weights used for calico bass — from light swimbaits to heavier jigs — with minimal backlash adjustment; 4CRBB corrosion-resistant bearings for saltwater durability.
• Light to Medium Lure Casting — SV TW spool's reduced rotational inertia makes it exceptionally forgiving with lighter lures that would cause backlash on conventional baitcasting spools.
• All-Day Casting Sessions — 6.5 oz lightweight and SV TW spool's effortless casting reduce fatigue during extended inshore sessions from the boat or shore.
• Left-Hand Retrieve Anglers — CLTW80HL left-hand model available for anglers who prefer left-hand retrieve on baitcasting reels.

The upgraded evolution of one of Daiwa's most proven saltwater baitcasting platforms, the Daiwa Lexa TW combines the battle-tested Lexa foundation with Daiwa's industry-leading T-Wing System (TWS) line guide for a heavy-duty round baitcasting reel purpose-built for saltwater applications. The T-Wing System's T-shaped line guide dramatically reduces line friction on the cast compared to conventional level-wind guides, delivering longer casts and smoother line flow with heavy braid — the critical advantage for yellowtail, calico bass, and inshore saltwater fishing where casting distance and braid performance matter.

The Lexa TW is built around a stainless steel pinion gear and high-grade brass main gear for long-term durability under sustained saltwater loads, housed in an aluminum frame and side plate for maximum rigidity and precise internal component alignment. The swept Power handle with custom EVA knob delivers maximum power and torque for fighting large fish and retrieving heavy rigs. 8 corrosion-resistant ball bearings + 1 roller bearing provide ultra-smooth operation at all retrieve speeds. Available in 300 and 400 sizes across Power, High Power, Extra High Power, and Left Hand configurations.

Key Features

• T-Wing System (TWS) — T-shaped line guide dramatically reduces line friction on the cast compared to conventional level-wind guides; delivers longer casts and smoother line flow with heavy braid for saltwater applications.
• Stainless Steel Pinion Gear + High-Grade Brass Main Gear — Premium gear materials provide long-term durability under sustained saltwater loads and heavy fish pressure; smoother, more powerful retrieve than conventional gear combinations.
• Aluminum Frame & Side Plate — Rigid aluminum construction provides maximum frame rigidity for precise internal component alignment and long-term durability in saltwater environments.
• 8CRBB + 1RB Bearing System — 8 corrosion-resistant ball bearings plus 1 roller bearing; CRBB placement at key saltwater exposure points for long-term smooth operation in inshore and offshore saltwater environments.
• Swept Power Handle + Custom EVA Knob — Swept handle design and custom EVA knob deliver maximum power and torque for fighting large fish and retrieving heavy rigs from depth.
• 28.7 lb Maximum Drag — High drag capacity for large yellowtail, calico bass, and inshore saltwater species; XH models rated at 24.2 lb drag.
• 300 & 400 Size Options — 300 size for lighter line classes (12–14 lb mono, 30–50 lb braid); 400 size for heavier line classes (17–20 lb mono, 40–50 lb braid) and larger fish.

Product Specifications

Model Selection Guide

• 300 Size (12/260 mono, 30/310 braid) — Best for lighter saltwater applications: calico bass on 30–50 lb braid, inshore finesse, and situations where a slightly smaller frame is preferred. 12.0 oz.
• 400 Size (17/220 mono, 40/260 braid) — Best for heavier saltwater applications: yellowtail, larger calico bass, and situations requiring more line capacity on 40–50 lb braid. 12.2 oz.
• P (6.3:1) — Standard power retrieve; best for cranking heavy lures, swimbaits, and applications where maximum torque is more important than retrieve speed.
• HP (7.1:1) — High-speed retrieve; best for fast-moving lures, covering water quickly, and applications requiring a balance of speed and power.
• XHP (8.1:1) — Extra high-speed retrieve; best for fast-moving surface lures, burning lures quickly, and situations where maximum retrieve speed is the priority. Note: 24.2 lb drag vs. 28.7 lb on P and HP models.
• HLP / HL-P (7.1:1 Left Hand) — Left-hand retrieve versions of the HP model for anglers who prefer left-hand retrieve on round baitcasting reels.

Best For

• Yellowtail & Inshore Saltwater — T-Wing System delivers longer casts with heavy braid for yellowtail on iron and live bait; 28.7 lb drag and aluminum frame handle the sustained pressure of large yellowtail.
• Calico Bass — 8CRBB corrosion-resistant bearings and aluminum frame handle saltwater exposure; T-Wing System improves casting distance with 30–50 lb braid for calico bass around kelp and structure.
• Heavy Braid Applications — T-Wing System's reduced line friction is most impactful with heavy braid (30–50 lb); stainless steel pinion and brass main gear handle the sustained loads of heavy braid fishing.
• Offshore & Big Game — 400 size with 40–50 lb braid capacity and 28.7 lb drag for offshore species requiring maximum line capacity and drag power from a round baitcasting platform.

Built for anglers who demand maximum line capacity, 30 lb drag, and a full aluminum frame in a baitcasting platform, the Daiwa Lexa 500 HD is a heavy-duty conventional-style baitcasting reel engineered for saltwater and freshwater big-game applications — tuna, yellowtail, calico bass, white seabass, and any situation where you need serious line capacity and drag power in a baitcasting form factor. The aluminum frame and side cover provide a rigid, corrosion-resistant foundation that maintains precise gear mesh under the sustained loads of hard-fighting fish.

MagForce cast control delivers smooth, precise casting across a wide range of lure weights without manual adjustment, while the stainless steel drive gear ensures long-lasting performance under heavy load. The Ultimate Tournament Drag (UTD) system provides consistent, smooth drag pressure up to 30 lbs, and the 130mm swept handle delivers the leverage needed to work large lures and fight powerful fish. Available in 5 gear ratio options from 5.1:1 (Power) to 8.1:1 (Extra-High), including a left-hand retrieve model. 

Key Features

• Aluminum Frame & Side Cover — Full aluminum construction provides a rigid, corrosion-resistant frame that maintains precise gear mesh under the sustained loads of hard-fighting saltwater and freshwater species.
• MagForce Cast Control — Magnetic cast control system delivers smooth, precise casting across a wide range of lure weights; reduces backlash without manual spool tension adjustment.
• Stainless Steel Drive Gear — Stainless construction ensures long-lasting gear performance under heavy load; resists corrosion in saltwater environments.
• Ultimate Tournament Drag (UTD) — 30 lb maximum drag with consistent, smooth drag pressure throughout the fight; engineered for the sustained demands of large saltwater and freshwater species.
• 130mm Swept Handle — Long, swept handle provides maximum leverage for working large lures and fighting powerful fish; reduces fatigue during extended sessions.
• 6CRBB + 1 Bearing System — 6 corrosion-resistant ball bearings plus 1 roller bearing for smooth, reliable operation in saltwater environments.
• Massive Line Capacity — 60/380 and 80/200 J-Braid capacity handles the heavy braid needed for deep water and offshore applications.

Product Specifications

Gear Ratio Selection Guide

• LX-HD500P-P — 5.1:1 / 27.1" per crank (Power): Maximum torque for slow-rolling large swimbaits, deep jigging, and applications where cranking power matters more than retrieve speed. Best for heavy lures and deep water.
• LX-HD500-P — 6.3:1 / 33.4" per crank (Standard): The most versatile gear ratio; covers a wide range of techniques from medium-speed retrieves to moderate jigging applications.
• LX-HD500H-P — 7.1:1 / 37.7" per crank (High): High-speed retrieve for burning lures, fast jigging, and applications where line recovery speed is critical. Right-hand retrieve.
• LX-HD500HL-P — 7.1:1 / 37.7" per crank (High — Left Hand): Same high-speed performance as the 500H-P for left-hand retrieve anglers.
• LX-HD500XH-P — 8.1:1 / 43" per crank (Extra-High): Maximum line recovery speed for fast presentations, burning topwater, and situations where the fastest possible retrieve is needed.

Best For

• Tuna & Yellowtail — 30 lb UTD drag and 60–80 lb braid capacity handle the demands of tuna and yellowtail on heavy baitcasting setups.
• Calico Bass & White Seabass — Aluminum frame rigidity and MagForce cast control for precise presentations on calico bass and white seabass in kelp and structure.
• Heavy Freshwater — 30 lb drag and massive line capacity for muskie, pike, and large freshwater species on heavy braid.
• Left-Hand Retrieve Anglers — LX-HD500HL-P left-hand model available at 7.1:1 for anglers who prefer left-hand retrieve on baitcasting reels.

The all new Accurate Tern 2 Conventional Star Drag Reels have the same solid features as its predecessor with new improvements taking it to another level of Star Drag reel. The Tern 2 has the Twin Star Drag technology that is the first of its type in a star drag reel. The udal surface drag is smoother and more powerful.

The Tern 2 also has an (MGBS) Main Gear Bearing support system for a smoother, stronger operation.  This has been tested all over the world with excellent results. The new Tern 2 is ready for time on the water and putting fish in the hold.

• First TwinStarDrag® (TSD) Technology for a smooth, powerful drag
• Accurate Xtreme Casting Technology® (XCT) for ease of casting for increased distance with less backlashes
• Accurate CVX Technology for lightweight and strong reels
• Main Gear Bearing Support (MBS) Patent Pending for smoother, stronger operation
• Stainless steel gears for strong cranking power
• 6 ABEC 5 Bearings
• Made of 6061 T6 aircraft aluminum for strength and lightweight
• Side spool tension adjustment for fine tuning of spool

The Shimano Tranx 500 Baitcast Reel is in a class of its own. This powerhouse reel delivers 25 pounds of drag, a super-strong levelwind, a comfortable power handle, and X-Ship technology for increased torque and casting distance. Built to handle big fish in both saltwater and freshwater, the Tranx 500 is the ultimate choice for anglers targeting trophy-caliber species.

Available in two gear ratios to match your fishing style and conditions. The HG (High Gear) model features a 6.6:1 ratio with 43 inches per crank, perfect for throwing lures like irons, Waxwings, or Rapala X-Raps where faster line retrieval keeps your lure at the optimal speed. The PG (Power Gear) model offers a 4.6:1 ratio with 30 inches per crank, delivering maximum torque and power for deep structure fishing where you need serious cranking power to turn big fish away from cover.

The Tranx 500's compact yet robust design houses advanced Shimano technologies including HAGANE Body for rigidity, MicroModule Gear for smooth retrieval, and Cross Carbon Drag for consistent stopping power. Pair it with PowerPro Maxcuatro braid to maximize line capacity and target fish up to 100 lbs with confidence. Whatever you're fishing for, this bulldozer of a reel will get the job done.

Key Features:

• HAGANE Body
• X-Ship
• MicroModule Gear
• Cross Carbon Drag
• S3D Spool
• 25 lb Max Drag
• Super Strong Levelwind
• Comfortable Power Handle

Specifications

Line Capacity

Daiwa's flagship star drag jigging reel, the Saltiga SD15 is built for serious offshore jigging — tuna, yellowtail, amberjack, and large pelagic species — where sustained power, gear stability, and precise drag control are non-negotiable. The full HyperDrive Design system — Hyper Armed Housing, HyperDrive Digigear, Hyper Tough Clutch, and Hyper Double Support — delivers the rigidity, gear precision, and cranking smoothness that defines the Saltiga line.

MagSeal ball bearing locks out saltwater intrusion for lasting smooth performance, while 8 CRBB corrosion-resistant ball bearings ensure long-term durability in harsh offshore environments. The waterproof ATD drag system delivers 22 lbs of smooth, reliable drag pressure with a drag clicking mechanism for precise adjustments and a spool lock mechanism for controlled presentations. The 85mm custom “T” shape handle provides a strong, ergonomic grip for working jigs and fighting fish. Braid-only design — no mono capacity. Available in Right Hand and Left Hand.

Key Features

• HyperDrive Design System — Four-part system: Hyper Armed Housing for rigid frame integrity, HyperDrive Digigear for smooth/durable gear teeth, Hyper Tough Clutch for crisp engagement, and Hyper Double Support for stabilized pinion gear cranking power.
• Waterproof ATD Drag System — 22 lbs of smooth, reliable drag pressure; waterproof construction maintains consistent drag performance in saltwater environments.
• MagSeal Ball Bearing — Magnetic oil seal locks out saltwater, sand, and debris at the bearing level for lasting smooth performance in harsh offshore environments.
• 8 CRBB + 1 Bearing System — 8 corrosion-resistant ball bearings plus 1 roller bearing for ultra-smooth operation and long-term saltwater durability.
• Drag Clicking Mechanism — Audible, tactile drag clicks for precise drag adjustments during the fight without looking away from the water.
• Spool Lock Mechanism — Locks the spool for controlled presentations and prevents accidental line release.
• 85mm Custom “T” Shape Handle — Ergonomic handle provides a strong, secure grip for sustained jigging cadence and powerful fish-fighting leverage.
• Braid-Only Design — Optimized spool geometry for braided line; no mono capacity.
• Saltiga Executive 5-Year Warranty & Service — Daiwa’s finest service warranty and experience, exclusive to Saltiga reel owners.

Product Specifications

Best For

• Offshore Jigging — HyperDrive gearing, ATD drag, and 85mm T-handle purpose-built for sustained jigging cadence targeting tuna, yellowtail, and amberjack.
• Slow Pitch Jigging — 6.3:1 gear ratio and 40.5" per crank deliver the torque needed for controlled slow pitch presentations at depth.
• Large Pelagic Species — 22 lb ATD drag and CRBB bearing durability built for the sustained power demands of tuna and large amberjack.
• Left-Hand Retrieve Anglers — SAGSD15L left-hand model available for anglers who prefer left-hand retrieve on conventional jigging reels.