Crimps

Izorline Single Premium Aluminum Sleeves are perfect for monofilament lines using the ratings below.  Simply match the sleeve with the slot in the crimper and give it a firm hand shake.  Be careful not to get close to the edges of the sleeve, just crimp the middle of the sleeve.

Need some chaffing tubes?  Click here.

Billfisher Aluminum Single Sleeve. Highest quality soft aluminum sleeves that work great with monofilament or fluorocarbon.  When crimping, make sure not to get close to the ends of each sleeve or it may cut into your line when fighting the fish.

Need chaffing tubes, click here.

The Sea Striker Billfisher Double Sleeves are great for attaching lures and hooks to heavy line without knots.  If crimped correctly, a sleeved line is stronger than a knot and has 100 percent breaking strength.  

You will notice on the line sizes below that there is no 100lb crimp.  It's because of the way that the sleeves are manufactured and aren't made at the 100lb diameter.  It is better to go with a little bigger crimp than a little smaller crimp, but they both will work.  

Another option is to use an aluminum sleeve since it's softer and has a greater tolerance to differing line sizes.  The The Sea Striker Billfisher Double Sleeves shown here are made of brass and are able to create a connection with a smaller profile.  Aluminum sleeves are longer so it comes into more contact with the line.  In the end, it's just personal preference as to what kind of sleeve you use.

Packs of 25

Recommended Line Usage:

1.0B - 60-80lb Mono

1.3B - 125-130lb Mono

1.6B - 150-200lb Mono

1.9B - 250lb Mono

2.2B - 300-400lb Mono

The Izorline Crimping Kit comes equipped with everything you need from fishing long range, heavy tuna fishing and even kite fishing. Comes with crimps as light as 80lb and as heavy as 400lb, and with all the corresponding braid tube chafe guards.

The sleeves in this kit are aluminum and will only work with monofilament or fluorocarbon line.  You don't have to squeeze it too hard, just a firm handshake is all it takes.  We also recommend not crimping all the way to the edge of the crimp.  Leave about a 1/16th of an inch to and 1/8th of an inch from both edges.  

The Izorline Crimp Kit also comes with an Izorline crimper for everything that comes in this heavily stocked crimp kit. Izorline's laboratory tests conclude that our anti-chafing springs increase monofilament break strength by up to 12%.

If you ever find yourself looking for new set of Toit Fishing Crimpers, Crimping Pliers or a Swagger, ask a couple of questions first. What is torque and compressive strength? Torque rotational force represents the capability of force to affect something in a rotational motion. Compressive strength is basically the amount of load a specific area of a material can bear.

These 2 areas were the most essential problems to solve with the design strategy of our crimping pliers. The reduced surface area at the business end, in conjunction with the short distance to the pliers fulcrum (pivot point where pliers rotate), has allowed us to maximize torque and deform crimps. This easily allows us to crimp 400lb Multi-strand Stainless Cable and 400lb Mono or Fluoro leader material using either aluminum, copper or brass crimps. And it fits in your pocket!

Designed specifically for crimping, they're perfect for fishing trips abroad and boat trips saving on space and weight. Take a look at our "Toit" crimping technique used for all suitable aluminum crimps

Features:

• Focused crimping surface area
• Suitable for crimping 400lb Mono, Fluoro Leader and 400lb Multi-strand Stainless Cable
• ø3mm Male Crimp Jaw
• ø2mm Female Crimp Jaw
• ø3mm Female Crimp Jaw
• Suited for oval aluminum crimps and single and double copper and brass crimps
• Stainless Steel 410 J1 drop forging
• Internally spring loaded for easy operation
• PVD Tialn surface coating
• Ergonomic hand finished design
• Designed for hand/grip comfort
• Lightweight
• Designed to fit the Toit Leather Sheath and Toit Pliers Holder (Sold separately)
• Environmentally friendly product, no rubber/plastic/silicone handle
• All metal design - No plastic to fall off, shrink or get damaged
• Highly polished surface finish

The Izorline Heavy Duty Crimper is ideal for crimping Aluminum mono crimps. It also features a side-cutter for cutting mono and wire. There are 4 positions for all of your crimping needs.  We like this crimper because it's well made and has the necessary slots for most crimps up 400lb line.

Slot 1 = .1mm to .5mm (10-25lb mono or fluorocarbon)

Slot 2 = .5mm to 1.0mm (30-80lb mono or fluorocarbon)

Slot 3 = 1.0mm to 2.0mm (100-300lb mono or fluorocarbon)

Slot 4 = 2.2 mm (400lb mono or fluorocarbon)

Billfisher Stainless Steel Thimbles

Small fits mono up to 200lb

Medium fits mono 200lb-400lb

AFW Double Leader Sleeves - the preferred choice of professional leader, lure, and tackle manufacturers. Designed with a burr-free, nonabrasive finish and high strength, corrosion-resistant materials, these black-finished sleeves are perfect for use with big game mono leader material. Transform your fishing experience with AFW's Double Sleeves.

The Billfisher Hand Crimper ECN10 is a three-position tool crimps wire and mono from 50 lb. to 450 lb. test. Complete with hardened side cutter. The perfect tools for a professional crimp on Sea Striker double sleeves. The Deluxe models feature special heat treated satin finish jaws and chrome handles for maximum corrosion resistance. Clam-packed individually.

Features:

• Quality Precision Hand Swager
• Crimps Double Sleeves up to 2.2mm
• Spring Loaded for Easy Jaw Opening
• Comfort Grip
• Hardened Jaw with Three Crimping Positions
• Crimps Wire and Mono from 50lb to 400lb
• Coated Jaws and Handles for Saltwater Resistance
• For Use with Aluminum and Copper Sleeves
• Safety and Release Lock