Fishing Tools

Pitbull Tackle Braided Line Cutter 2.0

- For Cutting Braided Fishing Line, Monofilament, and Flourocarbon -

These cutters are designed to do one thing exceptionally well; cut braided line. These are the last line cutters you will ever need, period.

Meticulously designed and tested for surgical precision, these braided line cutters are the most precise and efficient cutters on the market. The Pitbull Tackle Braided Line Cutter 2.0 was originally designed to be the best braid cutter on the market, earning 10/10 in the Performance Category on Tackle Tour's Review of the product.

Many anglers see any regular pair of line cutting scissors and assume they'll do just fine, but that's just not the case. So many anglers have been plagued by frustration while dealing with braided lines as they have a tendency to kink and fray around each cut, especially in tight areas around knots and connections. Those troubles are a thing of the past as the Pitbull Tackle Braided Line Cutter 2.0 offers unparalleled cutting ability. The serrated edge design was created to slice through braid effortlessly, keeping a clean, fray-less edge on each cut of braid with no tension applied to the line. Gone are the days of your old cutters mashing the braid several times before finally slicing through. The Pitbull Tackle Braided Line Cutter 2.0 requires NO line tension while cutting braid giving you the cleanest and most precise cut the first time. With these braided line cutters you'll be able to produce smooth connections to leaders, swivels, split rings, hooks, lures etc...

All sorts of features have been included with these cutters to create the simplest, most efficient cutting tool on the market. The spring loaded handle allows for smooth repeated cuts while the locking clip lets any angler store the cutters safely and securely. In addition to all of these features these cutters are engineered with high-quality stainless steel which delivers superb corrosion resistance in both freshwater and saltwater.

Version 2.0
- See the Improvements on the 2.0 Version -

The Pitbull Tackle Braided Line Cutter 2.0 offers even more functionality than it's predecessor. The cutting edges and overall design of the cutter remains completely unchanged, but an integrated Monofilament/Flourocarbon Cutter was added at the base of the cutting blades as well as a lanyard attachment for safely securing your cutters. By adding the mono/flouro cutting area on each blade, the longevity of each cutter is greatly increased as repeated cuts with non-braided lines over time will dull the serrated cutting edge and diminish the effectiveness of the blades. The lanyard attachment is also a new addition as it allows any user to secure their cutter to a boat, backpack, line counter, or even themselves.

The Tackle Express Boomerang Fishing Line Cutter cuts clean and precise through braided line, mono line, and fluoro line. With the built-on carabiner, clip it to your hip or vest so it's always handy and never lost. Snip the fishing line and let it go, the built-in tether retracts back into place until you need it again, no more looking around the boat with your hands full for a set of fishing pliers or nippers. With a Boomerang SNIP Fishing line cutter you'll spend more time with your line in the water and less time looking for your tool. 

FEATURES AND BENEFITS:

• 36" retractable military grade type-II braided nylon fiber cord
• Integrated safety feature locks the blade close when not in use
• Cuts 50 lb. braided line, fluoro line and mono lines clean and smooth every time
• 420 Stainless steel cutters are corrosion resistant
• Easily attaches anywhere with the included carabiner

Set the story straight with Mustad’s Rollable Measure Band. Get an accurate measurement of your latest catch up to 55 inch long without a tangling measuring tape. With the built-in belt clip, you can keep it by your side ready for the next big one. The measuring band features both metric and imperial measurements. 

Mustad Braid Cutters with Split Ring Pliers provide versatility and convenience in one high-quality package. Able to slice through the toughest braids, the Mustad Braid Cutter with Split Ring Pliers are the perfect tool for trimming up tag ends and re-tying.

At the tip, the Mustad Braid Cutters with Split Ring Pliers feature a finesse split ring opener that comes in handy when tis time to swap out hardware. Made from durable stainless steel, the Mustad Braid Cutters with Split Ring Pliers feature a spring-loaded construction and soft touch handles that allow for easy, one-handed operation. Complete with a safety latch, the Mustad Braid Cutters with Split Ring Pliers provide convenient two-in-one performance.

The Fish Grip Jr. grabs the fish by the lip and holds it like pliers. Made for smaller fish or hands, it is approximately 7 inches long. Pictured in orange.

Like the Original Fish Grip, The Fish Grip Jr. is made of sturdy THRIVE composite which keeps it lightweight and allows it to float.

Features:

• Over-Center Locking - Grip to lock, flip to open
• Unique Jaw Design - Safely holds the lip of the fish
• Durable Construction - Plastic and stainless steel
• High Visibility - easy to see, day or night
• Weight Scale Slot - Attached scale and deduct 2 ounces for accurate measurement
• Wrist Lanyard - Secure Fish Grip to you or your boat

DaHo Hollow Spectra Threading Needles have been sized by their length so if a customer has more than one of them, they can stand them on their open end and find the one they want by its length, compared to all the other threating needles. Our smallest threading needle, the 10 to 20# size, has a length of 5.3". Each larger threading needle is .1" longer than the last, with our largest 400 to 500# size being 6.5" in length. When we started, we spent a year gathering all of the requested features for our new needles. Having some way to identify the threading needle sizes was one that was requested many times. Due to their size and materials, the length was the only way to address this request.

The DaHo Hollow Spectra Threading Needles are hollow inside, except for the point, so monofilament or fluorocarbon line can be inserted into the needle. Then, the needle with the internal mono/fluoro line, is inserted, or threaded, into the hollow center section of the spectra braid. The needle, and attached mono/fluoro line, is typically inserted inside of the spectra from 3 to 5 feet to provide the best strength of the join. Because of the slick surface of the mono/fluoro line, the end point of the spectra must be finished to secure it to the mono/fluoro line. This finishing is usually done by gluing, serving,  crimping, or some combination of these attachments, to the spectra line end. This ensures the join will not slip before the compression pressure occurs in the braid of the hollow spectra line to hold the joined lines together.

The primary size of the threading needle is the ID, or Internal Diameter, indicating the approximate size of the mono/fluoro line that it will fit inside. The threading needle size you need is determined by the size of the mono/fluoro line you are using. The ID sizes of our threading needles can vary up to .002" due to the Stainless Steel Hypodermic tube manufacturing process. This is the standard acceptable size variance of the SS tubes we use to make our needles. As we receive new shipments of needles, the IDs may change up to this .002" size.  It is recommended that you select a needle that is at least .002" larger than your line for ease of use. It can also be difficult to fit an exact size of line into a needle. If you have a problem with your line not fitting into one of our needles, please send us an email and we will analyze and resolve the problem.

Developed with the demands of the seasoned fisherman in mind, Daiwa Lightweight Pliers and Cutters tools are well-suited for their important role in landing and releasing gamefish and cutting line both mono and braided.

With a choice of 6” and 8” longnose pliers and 6” and 7” cutters, these tools are designed for catches both large and small. Ease of handling is enhanced by designs that are 30% thinner and 30% lighter weight than standard pliers and cutters.

The Drilled Handles are Rubber Coated providing True Grip in wet and slippery conditions. The Heat Treated Carbon Steel is hardened to Rockwell “C” grade and Nickel coated for Corrosion Resistance.

To insure clean performance, the Cutter’s edge is safeguarded by a Double Tempering Process. Tools designed for professionals and week-enders alike, the Daiwa Lightweight Pliers and Cutters set new standards for sport fishing accessories.

• 30% Thinner and 30% Lighter
• Drilled Handle Arms
• True Grip Rubber Coated Handle
• Heat Treated Carbon Steel
• Rockwell “C” Hardness
• Nickel Finish ( corrosion resistant )
• Double Tempered Process Cutter

The Daiwa Deckhand Kit offers great value by bundling 3 Daiwa tool items together. The kit includes a 6 in. Diagonal Cutter, 6 in. Needle Nose Pliers, and a 6 in. Plier Sheath. The 2 Position Daiwa 6 in. Plier Sheath features a removable belt/pocket clip and durable nylon construction.

Dr. Fisherman is America's most versatile fishing tool! Made from stainless steel for long lasting use. This durable tool with its serrated scissors, cuts all fishing line including heavy monofilaments. 

For those that don't know, hemostats have a locking mechanism that will clamp onto your clothes, jacket, backpack, just about any fabric.  This keeps them in reach at all times for unhooking fish.  These are made of stainless steel so they are unlikely to rust.  The long handles and short teeth section allows for greater power in grabbing the hook.

These fishing hemostats can be used for light saltwater or just about any freshwater fish.  Most of the time they are used by trout or steelhead fisherman that run rivers or streams.

Especially useful for unhooking fish!!!

Overall Length: 6"

These Halco Split Ring Pliers truly unique and patented design has been developed and refined by Halco Tackle to give optimal performance and long lasting service as they do here in the factory. They are used in the factory for all our products, from our tiny #2 fish rings, right through to the large #7xx (95kg) fish rings. These fish ring pliers are also fine to use on any other commercially available split rings in the market.

Made out of hardened tool steel, the useful life of the product outdoors will be extended by rinsing in fresh water if it has been immersed in salt water, and applying a light coating of spray oil to the steel parts.

We like them because they work on tine split rings for trout or large split rings for tuna. The open the split ring with ease and create a wide enough gap for almost any hook or lure.  If you have to have one split ring plier in your box, the Halco Split Ring plier is it!

The Rapala Soft Grip Fillet Knife combines the legendary Rapala flexible blade with a non-slip, soft grip handle resulting in ultimate filleting comfort. Sturdy and super-sharp lower blade easily cuts through bone structure and tough skin. Progressive “double-taper” blade offers strength and directional stability while the strong flexible tip is unmatched for delicate fillet work. Enlarged finger guard provides added safety. Comes complete with coordinated black sheath with belt loop. Set also includes single-stage sharpener that quickly restores the original razor-sharp edge time after time.

Features

• Thermoplastic Soft Grip Handle
• Textured Finish for Sure Grip
• Safety Finger Guard
• Super Sharp Handground Stainless Steel Blade
• Longer Lasting Cutting Edge
• Progressive Double Taper Blade
• Includes Single-Stage Sharpener
• Actual blade length may vary slightly due to hand craftsmanship