Sort by:
73 products
73 products
The Penn Fathom and Torque Handle Knob Replacement is the original knob found on classic Fathoms and Torques, providing an ideal replacement for your damaged knob or T-bar handle on the new Fathom 2-speeds. Perfectly compatible for both Fathom and Torque reels.
Penn changed the design of the cap and it no longer has the two screws to attach it. It just pushes into the slot in the handle and stays in with friction making this change even easier.
Replace your Penn Fathom or Torque reel handle with this factory original knob, designed to fit both old and new Fathom reels. Some anglers don't like the T-Handle that comes with your new Penn Fathom Reel and this knob handle is OEM Penn so it's an easy swap. This handle is particularly wanted on the smaller 10 and 15 size reels since the stock handle can be a little bulky. Enjoy trusted performance and response with this reliable and durable knob. For perfect fit and long lasting performance, choose the genuine Penn replacement!
Keep your reels in top condition with the Penn Neoprene Conventional Reel Covers, designed specifically to shield your investment from the wear and tear of travel and storage. Crafted from durable 5mm neoprene, these covers offer a snug, secure fit for most conventional reels while providing exceptional protection against dings, salt, and scratches.
Each cover features a Velcro® closure for easy on-and-off access without needing to remove the reel from the rod—ideal for anglers on the move. Ventilation ports help prevent moisture build-up, reducing the risk of corrosion after long days on the water.
Key Features:
-
Premium 5mm neoprene construction for maximum protection
-
Easy-fit design works with rods still rigged
-
Reinforced seams for added durability
-
Vent ports reduce condensation and salt buildup
-
Available in multiple sizes to fit your Penn conventional reels
| Cover Size | Reel Models Covered |
|---|
| XXS | TRQ200, TRQ100, TRQ100LD, 965, 975, 975CS, 975CSLD, 975SLD, 112H, 310GTI, 310GT2, 525MAG, 525GS, 535GS, 545GS, 500L, 320GTI, 320GT2, 320LD, 555GS |
| XS | TRQ300, TRQ300LD |
| S | 30VSX, 16VSX, 16VS, 30TW, 30T, 20T, 16S, 12LT, 10KG, 113, 113H, 113H2, 113HSP, 113H2SP, 113HLW, 113H2LW, 113HN, 113MTL; GLD20II, 10LD, 220, 230, GLD20, 15LD, 330GTI, 330GT2, 330LD |
| M | 50VSX, 30VSW, 30VW, 50S, 50T, 50ST, 30SW, 30TW, 30T, 30S, 114, 114H, 114HLW, 340GTI, 340GT2, 345GTI, 345GT2, 15KG; GLD30, GLD30II, 24KG |
| L | 70VS, 50VSW, 50VW, 70VSL, 50SW, 50S, 50TW, 115L, GLD50II, 116L |
| XL | 80VSW, 80TW, 80T, 80STW, 80ST |
| XXL | 130VSX, 130ST, 117L |
Looking for a way to protect your Penn spinning reel, this Penn Neoprene Spinning Reel Cover will do the trick. It fits on your reel and rod or you can just put it on the reel for storage. The soft neoprene will protect it from scratches and keep the dirt out.
- 5mm Neoprene Covers
- Triple Stitched Seams
- Durable Velcro Closures
- Lug cut-out slots for easy storage
| NUMBER | SMLSRC | MEDSRC | LRGSRC | XLGSRC |
|---|---|---|---|---|
| SKU | 1203327 | 1203328 | 1203359 | 1203360 |
| Fits Reel Sizes | 1000-4000 | 4500-5500 |
6000 | 7000-8000 |
| COLOR | Black | Black | Black | Black |
| EQUIPMENT SIZE | Small | Medium | Large | Extra Large |
| PACKAGE COUNT | 1 | 1 | 1 | 1 |
Qty 1 per package
Penn Oil and Grease Combo Pack
1 oil and 1 grease
.5 oz each
Phenix Low Profile Reel Covers are designed to protect your reels from boat rash, deep scratches, and corrosive elements. They stay securely fastened with a quick-release Velcro closure and are designed in a pouch style to completely cover your reel. The covers are composed of durable neoprene material with dual stitch seams and a reel handle storage pocket.
These reel covers are made to last.
Features:
- Dual velcro closures
- Fits right hand retrieve reels
- Heavy duty dual stitch seams
- Multi use front mounted D-ring
- Fits both on or off rod for reel storage
- Reel clamp Cut-out for use on deckhand rods
| Reels Fit Guide | ||||
| SIZE | SMALL | MEDIUM | LARGE | X-LARGE |
| REEL SIZE | 50 | / | / | |
| TRANX SIZE | / | 150 & 200 | 300 & 400 | 500 |
| CURADO SIZE | / | 200 | 300 | |
| LEXA SIZE | / | 300 | 400 | |
Phenix Neoprene Reel Covers are designed to protect your reels from boat rash, deep scratches, and corrosive elements. They stay securely fastened with a quick-release Velcro closure and are designed in a pouch style to completely cover your reel. The covers are composed of durable neoprene material with dual stitch seams and a reel handle storage pocket.
These reel covers are made to last.
Features:
- Dual velcro closures
- Fits right hand retrieve reels
- Heavy duty dual stitch seams
- Multi use front mounted D-ring
- Fits both on or off rod for reel storage
- Reel clamp Cut-out for use on deckhand rods
Phenix Neoprene Casting Reel Covers Fit Guide:
|
Reel Cover Size |
S |
M |
L |
LLong |
XL |
XXL |
XXXL |
|
Accurate |
Valiant 300 |
Valiant 400, 400 (2 speed), Fury FX 400N |
500, 500N, 600, 600N |
/ |
/ |
/ |
/ |
|
Avet |
SX Series |
MX Series, MXJ |
JX, LX |
/ |
HX |
EX 30, 50 |
/ |
|
Daiwa |
Saltiga – 10, 15, Saltist 20, Sealine 20, Seagate 20 |
/ |
Saltiga 35H, 40H, Salist 35, 40 |
/ |
Saltist 50, Saltiga 50 |
Saltiga SA LD60(2 speed) |
/ |
|
Shimano |
Trinidad – 10, 12,14, Torium 14 |
Trinidad 16, 16N, 20, Torium 20, Talica 8 & 10 |
Torium 30, Trinidad 20(Gold) , Talica 12 |
/ |
TLD 20, Talica 16, 20. 25 Tranx 500 |
TLD 30 (2 Speed), Talica 50 |
/ |
|
Okuma |
Metaloid/Andros 5 |
Metaloid/Andros 12 |
Makaira 10 & 15, Metaloid/Andros 16 |
/ |
Makira 16 & 20 |
30, 50 |
/ |
|
Penn |
/ |
Fathom 15, 25 |
Fathom 30, Fathom Levelwind 25 |
Fathom 30 |
Fathom 40, 40N, FTH40LW, VSX 16 |
VSX 20, 30 |
VSX 50 |
|
Calcutta |
/ |
300, 400 |
700 |
/ |
/ |
/ |
/ |
|
Trinidad |
/ |
/ |
/ |
30 |
/ |
/ |
/ |
Phenix Reel Covers are designed to protect your reels from boat rash, deep scratches, and corrosive elements. They stay securely fastened with a quick-release Velcro closure and are designed in a pouch style to completely cover your reel. The covers are composed of durable neoprene material with dual stitch seams and a reel handle storage pocket.
These reel covers are made to last.
Features:
- Quick-release Velcro closure
- Fits right hand retrieve reels
- Heavy-duty dual stitch seams
- Fits both on or off rod for reel storage
- Fits over trigger reel seats
| Reels Fit Guide | ||||
| XS | SMALL | MEDIUM | LARGE | |
| Reel Sizes | 500-750 | 1,000 – 2,500 | 4,000 – 6,000 | 8,000 – 20,000 |
This Rapala Lock 'n Hold Rod Rack has long lasting plastic jaws hold a variety of rod sizes without deforming or damaging the blank. Designed to keep up to six rods and combos organized and safe on any surface, in any orientation – horizontal, vertical – even on the ceiling. Simple base grip holder takes the pressure off rod eyes eliminating damage. Durable construction for a lifetime or use. All required mounting hardware included.
They work great for hanging in the garage, shed, or a room in the house. Each set comes with a bottom for the butt section of the rods and a top section for the mid to upper section. We recommend having the upper section near the middle of the rod where it is stronger. When the rod clicks into place, please be careful not to put too much strain on it. Once clicked in, it will be very secure and will not come out easily.
Shimano Bhaltair Reel Bag is a must-have for anglers on the go. With thick liners and premium fabric, it offers the ultimate protection for your favorite fishing reels. Its versatile design and corrosion-resistant zippers make it perfect for any fishing destination. Say goodbye to worries and hello to peace of mind with the redesigned Bhaltair Reel Bag.
Features:
- Heavy TPU Corrosion-Resistant Zippers
- Heavy Denier Rip-Stop Polyester Fabric
- Double-Reinforced Stitching at Seams
If you need a cover for your spinning, conventional, or bait casting reel, the Shimano Reel Cover fit's all Shimano reels but also other brands as well. It's made of neoprene material which will protect your reel from scratches and blemishes.
The padding is sufficient enough to protect it but thin enough so that it's not bulky. It attaches with a premium velcro strap and has vented holes to allow for moisture to escape.
As with all the models, they can be attached to your reel and remain on the rod. The spinning version actually wraps around the rod keeping it and your reel secure and safe. These fit both left and right hand reels but the logo may be upside down on left handed reels. Shimano puts a "1" on the left hand reels model number to indicate they are left handed. For example, the right hand is a Tranx 400 is left hand and the 401. Wondering what size you need for your reel, check out the information below.
The medium round cover will fit Shimano 300 size and 400 size Curado and Tranx reels but it will be loose fitting. As of February 2024, Shimano doesn't make a cover to fit these reels tightly.
| ANRC820 | BAITCAST | Calcis 100, 200 series, Callisto 100 series, Castaic 200 series, Chronarch 100, 50 Series, Citica 200 Series, Coriolis 100 Series, Crestfire 100 Series, Curado 100 |
| ANRC830 | SMALL | Calcutta 250, 200 150, 100, 50 Series, Calcutta TE 300, 200, 100, 50 Series, Calcutta TE DC 250, 200, 100 Series, Cardiff 300, 200, 100 Series, Corvalus 300, 200 Series |
| ANRC840 | MEDIUM | Calcutta 700, 400 Series, Calcutta TE 700, 400 Series, Cardiff 400 series, Catala 400, 300 series, Corsair 400A, 300A series, Corvalus 400 Series, Tekota 600, 500, TLD Star 20/40S, 15/30S, Torium 20, 30, 16, Speedmaster IV, Trinidad 40N, 30, 20, 16, 16N, 14, 12, TR2000LD, 1000LD, TRN200G, 100G, Charter Special, Tranx 500 and Tranx 501, Curado 300 and 301(loose fit), Tranx 300, 301, 400, 401(loose fit) |
| ANRC850 | LARGE | Tekota 800/700, Tiagra 20, 16, 12, TLD 25, 20, 25, TLD-Star 30, TLD 2 Speed 30II, 20II, Trinidad 50, 40 |
| ANRC860 | XL | Tiagra 50WLRS, 50W, 50, 30W, 30WLRS, 30, TLD 2-Speed 50llLRS, 50ll |
Quantity 1 per pack
| ITEM NAME | Size | Color | Fits |
|---|---|---|---|
| Shimano Spinning Reel Cover | Small | Blue/Black | 500-1500 |
| Shimano Spinning Reel Cover | Medium | Blue/Black | 2000-6000 |
| Shimano Spinning Reel Cover | Large | Blue/Black | 8000 and Up |
This Shimano Official T-Bar Handle Replacement Kit is designed for Talica and Speedmaster reels, allowing you to gain more leverage and improved ergonomics when retrieving big fish. This kit contains original Shimano parts and is easy to install, simply requiring a screw driver to change out your smaller handle. You will need all these parts to change the handle. The original parts won't allow for the larger handle to be installed. They look similar to your original parts, but there are differences in the dimensions and the length of the small parts in the kit. Enjoy increased comfort and control while reeling in a catch.
Shimano T-Bar Handle Upgrade Fits:
Speedmaster II
- SPM12II
- SPM16II
- SPM20II
- SPM25II
Talica ll
- TAC12II
- TAC16II
- TAC20II
- TAC25II
The T-shaped knob has a 9 degree offset to increase grip and torque. With a 110mm arm length the Shimano T-Bar Handle Upgrade allows for more power while cranking on a fish. A great upgrade for your jigging setup, making for more comfort and ease while fishing vertically and winching big fish out of the depths.
When fishing long hours grinding large jigs, the T-Bar Handle's comfortable grip will help relieve cramping. When that "cow" tuna does bite, you'll be ready for the long battle.
Includes:
(1) T-Bar Handle
(1) Plastic Spacer
(1) Metal Cover Plate
(2) Phillips Screws
All Shimano OEM Parts
Specifications:
Arm Length: 110mm / 4.33in
Handle Length: 102mm / 4.02in
Handle width: 72mm / 2.83in
Handle top-side Diameter: 25mm / 0.98in
Handle bottom-side Diameter: 36mm / 1.42in
Handle Weight: 7.3oz
Installation:
First, you must remove the two Phillips screws on each side of the 2-speed button. Gently remove the switch cover, small plastic spacer with switch (Leave switch and spring in the plastic spacer, for reverence) and then remove handle.
You will have to transfer the switch and spring from the old plastic washer to the new one. (Look at old one for reference, only goes one way).
Then slide handle over the post, followed by the new plastic spacer and original switch, then the new cover plate, tighten with new longer screws (Blue theadlocker 242 recommended).
Unfortunately this Item does not qualify for any discount or sale.
The Shimano Talica Reel Covers are specifically designed for the Shimano Talica line of reels. A great way to make sure your reel looks brand new out of the box for many years to come, and making sure that style and good looks is a main priority. Fitting all sizes Talica reels from the 8 through the 50. Protect your investment in style. The Shimano Talica Reel Covers are built to preserve the quality and appearance of your Shimano Talica reels, from the 8 to 50 sizes. With its durable design and sleek look, you can trust these covers to keep your reels looking as good as new for years to come.
Shimano Talica-A T-Bar Handle Replacement is the T-Bar handle that comes stock on the new redesigned Talica 20IIA & 25IIA, producing unparalleled winding power. The new T-Bar Handle replacements will fit previous 2 speed model Talica II allowing you to gain more leverage and improved ergonomics when retrieving big fish. Original Shimano part and is easy to install, simply requiring a screw driver and wrench to change out your smaller handle. Enjoy increased comfort and control while reeling in a catch.
Shimano Talica A T-Bar Handle Replacement Fits:
Talica ll & Talica IIA
- TAC12II
- TAC16II
- TAC20II
- TAC25II
The T-shaped knob has a 9 degree offset to increase grip and torque. With a 101mm arm length the Shimano Talica A T-Bar Handle Replacement allows for more power while cranking on a fish. A great upgrade for your jigging setup, making for more comfort and ease while fishing vertically and winching big fish out of the depths.
When fishing long hours grinding large jigs, the T-Bar Handle's comfortable grip will help relieve cramping. When that "cow" tuna does bite, you'll be ready for the long battle.
Shimano OEM Part
Specifications:
Arm Length: 101mm / 4in
Handle Length: 98mm / 3.88in
Handle width: 66mm / 2.63in
Handle top-side Diameter: 24mm / 0.95in
Handle bottom-side Diameter: 32mm / 1.25in
Handle Weight: 3.4oz
Installation:
First, you must remove the two Phillips screws on each side of the 2-speed button. Gently remove the switch cover, small plastic spacer with switch (Leave switch and spring in the plastic spacer, for reverence)
With a wrench unscrew the two-speed button (set aside) and then remove handle.
Then slide new handle over the post, followed by the two-speed button (tighten well, to help line up spacer screwholes) Place the plastic spacer and switch, then the cover plate and screws and tighten (Blue theadlocker 242 recommended).
The Shimano Tiagra Reel Covers features include: 5mm neoprene sides, Gold logo and stitches over shiny black fabric match the color of Tiagra reels and Tallus rods. All reel covers fit perfectly to specific size of Tiagra reels.
We like these reel covers because they allow you to see the reel size right on the cover. If you have a bunch of reels in your reel case or on the rods, you can easily see what setup you are grabbing. They not only look classy, they protect your reels from scratches, dents, digs and fading from the sun.
They have been sized for each reel perfectly so it's a snug fit and won't blow off in the wind while you're heading to the fishing grounds. If you're going to spend the money on the great Tiagra reel, it's best to take care of it with a Shimano Tiagra Reel Cover.
Looking to change the handle on your Shimano Tranx Reel? This Shimano Tranx Paddle Handle is OEM and is made to fit all Tranx 300A and 400A size reels. This handle fits the Tranx 300, 301, 300HG, 301HG, 400, 401, 400HG, 401HG.
This Shimano made handle is easy to replace, just remove your existing nut lock screw, the nut lock plate, and the chrome nut. Remove your existing handle and replace it with the new handle. Be careful that the drag star doesn't pop off, it has a spring under it which gives it pressure from below. Replace the parts you took off making sure not to over tighten the chrome nut. The nut lock plate might take a little adjustment so the plate nut screw lines up with the screw hole.
The power handle version is a single knob to give you a better grip and more power on bigger fish. The power handle works best when you need more power and torque on bigger fish. We find the power handle is better on bigger fish or if you have a problem with your hand slipping off on an aggressive bite. On the west coast, we like the power handle for fishing surface irons and yoyo irons like the Salas 7X, Salas 6X or Tady 45 and Tady 4/0.
Qty 1 per package
The Shimano Velcro Rod Wraps feature an adjustable elastic nylon band to increase flexibility and functionality. The integrated EVA strips improve grip for added security. The Shimano Rod Wraps are great for both freshwater and saltwater rod bundles with an overall length of 13 inches that can secure a rod bundle with a 4-inch diameter. Each package of Shimano Rod Wraps includes two wraps.
Features:
- Integrated EVA Strips Improve Grip for
- Added Security
- Adjustable Elastic Nylon Band Increases
- Flexibility and Functionality
- Overall Length: 13 in. (33 cm) / Max
- Diameter: 4 in. (10 cm)
- Each Package Contains Two Rod Wraps
Showing 64/73