White Seabass Rods

One Composite Blank Family, 20 lb to 200 lb

Phenix Axis Conventional Rods are built from a composite blend of S-Glass and T-16 carbon fiber with multi-helix construction — a layup Phenix developed for the strength-to-weight demands of Southern California saltwater. The series runs fourteen models from 7'2" to 8', covering everything from a 20-40 lb flylined bait stick to an 80-200 lb rail rod, so you can build an entire spread out of one blank family.

Why Anglers Reach for the Axis

Glass gives you forgiveness and lifting power. Carbon gives you the light weight and responsiveness to fish all day and feel the bite. Most rods pick one. Every blank in the Axis series blends both, which is why the line diameter stays thin for the line class — you get castability that pure glass can't match and a backbone that pure graphite gives up.

The Problem With Single-Material Blanks

An all-graphite conventional rod feels great until a fish sounds under the boat and you need sustained lifting power — then it either folds or snaps. An all-glass rod will lift anything but casts like a broomstick and wears you out by mid-morning. Multi-helix composite construction wraps both materials so the blank resists twisting under angled pressure, which is the exact load a conventional rod sees when a fish runs down the side of the boat.

What Sets It Apart

• S-Glass and T-16 carbon fiber composite in every model
• Multi-helix construction engineered for saltwater loads
• Thin blank diameter for the line class across the whole range
• Fourteen models, 7'2" to 8', spanning 20-40 lb through 80-200 lb
• Extended-foregrip rail configurations available in the heavier classes
• Includes the 7'6" 50-100 lb Guadalupe Special

The Right Pick If…

• You fish SoCal sport boats, overnight trips, or long range
• You want one blank family covering inshore through offshore instead of a mismatched rack
• You want composite forgiveness without a telephone-pole blank
• You'd rather buy a rod rated honestly to your line class than overbuy

Choosing Your Model

• Medium Heavy, 20-40 lb (HAX-720MH, HAX-780MH): Flylined sardine and mackerel, inshore yellowtail, calico bass, white seabass. This is the bait stick, not a rail rod.
• Heavy, 25-60 lb (HAX-720H, HAX-780H): Larger baits, yo-yo iron, bigger yellowtail and school-grade tuna.
• Extra Heavy, 30-80 lb (HAX-720XH, HAX-780XH): Heavy iron and mid-grade tuna. The top of the range you can comfortably fish off the rod rather than off the rail.
• 2X Heavy, 40-100 lb (HAX-720X2H, HAX-760X2H Guadalupe Special, HAX-780X2H): Where the rail tier starts. Extended foregrip, built for bluefin off the rail.
• 3X Heavy, 60-130 lb (HAX-720X3H, HAX-760X3H, HAX-800X3H): Long-range bluefin. The 8'0" gives you the most blank outside the rail.
• 4X Heavy, 80-200 lb (HAX-C720X4H, HAX-760X4H): Top of the series. Cow-grade bluefin and the heaviest long-range work.

Why the Heavy Models Are So Long

On a rail rod, a large share of the length is foregrip. Once that foregrip is laid on the rail, you may have only four or five feet of blank actually fighting the fish. The more rod you have outside the rail on the water side, the more the fish has to work against — and the fulcrum becomes the boat instead of your arms and back. That's why the 2X Heavy and above run long, and why length on those models isn't about casting distance.

Best Techniques

• Flylined bait: Medium Heavy and Heavy models — enough tip to cast a live sardine, enough backbone to turn a yellowtail out of the kelp
• Yo-yo iron: Heavy and Extra Heavy — handles the load of ripping heavy iron up off the bottom all day
• Rail fishing: 2X Heavy and up — brace the extended foregrip on the rail and let the boat do the lifting
• Heavy live bait and kite: 3X and 4X Heavy — the 130 lb and 200 lb classes

Best Conditions

• Inshore kelp and structure where you have to turn a fish fast — lighter classes
• Offshore and overnight sport boat trips — mid classes
• Long range and Guadalupe Island grounds — 2X Heavy and up
• Any situation where fighting a fish off the rail beats fighting it off your arms

Best For

• Species by class: Calico bass, white seabass and inshore yellowtail on 20-60 lb models; wahoo, dorado and school tuna on 30-80 lb; bluefin and yellowfin tuna on 40-200 lb
• Techniques: Flylined bait, yo-yo iron, rail fishing, heavy live bait, kite fishing
• Environments: Kelp beds, inshore structure, offshore, sport boat, long range, Guadalupe and Mexican waters

Key Features

• S-Glass and T-16 carbon fiber composite construction
• Multi-helix blank layup
• Lengths from 7'2" through 8'
• Line ratings from 20-40 lb through 80-200 lb
• Six power classes: Medium Heavy through 4X Heavy
• Extended-foregrip rail builds in the 2X Heavy class and above
• Fourteen models in the series
• Guadalupe Special available in 7'6" 50-100 lb

Models & Specs

Tackle Express Tips

• Buy for the trip you actually book: If you're fishing half-days and overnights inshore, the Medium Heavy and Heavy do the job. The rail classes only earn their money on long range and heavy bluefin.
• Length on the heavy models is about the rail, not casting: The 7'6" and 8'0" heavy blanks aren't for bombing baits — they're for keeping blank on the water side of the rail during a fight.
• Match your line to the rating on the blank: A 40-100 lb rod fished with 130 lb line isn't a 130 lb rod. Fish it honestly and the composite does what it was designed to do.

FAQ

Which Axis models are rail rods?
The 2X Heavy class and above — 40-100 lb, 60-130 lb, and 80-200 lb. Those get the extended foregrip designed to brace against the boat's rail. The Medium Heavy, Heavy, and Extra Heavy models are conventional rods fished off the rod, not off the rail.

What does the S-Glass and T-16 carbon blend actually do?
S-Glass adds forgiveness and lifting power under sustained load. T-16 carbon fiber keeps the blank light and responsive. Multi-helix construction wraps the material so the blank resists twisting under angled pressure. Every model in the series uses the same blend.

How do these ship?
Every rod is wrapped in bubble wrap at the crucial points and suspended inside a thick rod tube so it can't be crushed or knocked around in transit. Note that rods over 8' do not qualify for free shipping.

United Composites RCE Elite Composite Rods are the lightest weight composite rods we’ve ever built. They come standard with lightweight EVA grips, graphite reel seats, and ALPS S-6 Stainless Steel framed, braid proof, guides. Each rod is decoratively single wrapped with Silver trim bands and metallic red and blue accents. There are applications ranging from 12lb to as high as 60lb+.The Elite Composite line is also offer, the Elite Composite+ configuration. All wraps and guides will remain the same. The primary difference is that the more durable hypalon material is used for the grips and the lightweight graphite reel seat is changed out for the popular ALPS CAH design aluminum reel seat. 

Elite Composite – Conventional Upgrade W/ ALPS Aluminum Reel Seat & Hypalon

RCE Conventional+ and Spinning+ – Hypalon Grips, ALPS Aluminum Centra Lock Reel Seat, ALPS S-6 SS Deep Pressed Ring Guides, Single Black Wraps with Silver trim bands and Blue and Red Accents.

Elite Composite – Deckhand

High grade corktape grip with nylon cord inlay, finished with a bulb style butt cap and mariners turkshead knot, ALPS S-6 SS Deep Pressed Ring Guides, Single Black Wraps with Silver trim bands and Blue and Red Accents.

The Conventional Rod the West Coast Has Been Building Toward.

Conventional saltwater fishing puts a specific set of demands on a rod blank that most production rods can't fully satisfy: enough sensitivity to read bait and feel structure, enough backbone to turn big fish from kelp and deep water, and light enough to fish all day without arm fatigue compromising your technique. The Phenix Black Diamond Conventional Rod addresses all three through aerospace-grade blank construction — Toray high-strength carbon fiber combined with a proprietary resin system and layering process that creates a blank thinner in diameter and lighter in hand than anything else in its line class, while being stronger, not weaker, than the rods it replaces.

Aerospace Blank Construction. Not a Marketing Claim.

The Black Diamond blank starts with Toray carbon fiber — the material used in aerospace and structural applications where the strength-to-weight ratio is a hard engineering requirement, not a performance aspiration. Phenix combines it with a high modulus graphite blend and their proprietary "secret sauce" resin system, layered in a unique process that stiffens the blank inter-laminarly without adding wall thickness. The result: a blank that transmits bite information from depth, loads correctly under conventional fishing loads, and generates the lifting power to pump big fish up from structure without fatiguing you in the process.

Two Hardware Tiers. One Blank Standard.

The Black Diamond Conventional lineup uses two hardware configurations depending on model. The 7' and 7'6" models use Alps reel seats and Hypalon handles — the Alps seat is a premium conventional reel seat known for its secure lock and clean aesthetic, favored by custom rod builders and serious inshore anglers. The 8' models use Fuji reel seats and X-Wrap handles — the Fuji hardware is the industry standard for performance saltwater conventional builds. Guides are Fuji Alconite, Alps S-6, or Seaguide depending on the specific model, all selected for the line class and blank behavior of that configuration. The Deck Hand variant (PSW809XH-J) ships without a reel seat for custom builds.

Why It Beats the Competition

• Toray high-strength carbon with proprietary resin layering — aerospace-grade blank; thinner diameter, lighter, stronger than comparable conventional blanks
• Two hardware tiers — Alps reel seat/Hypalon on 7' models, Fuji seat/X-Wrap on 8' models; both are premium configurations used in custom builds
• Full line class coverage — 10-30lb through 30-80lb across 11 available models; one listing covers inshore finesse through heavy offshore conventional
• Deck Hand variant available — PSW809XH-J ships blank only (no reel seat) for anglers who want to mount their own hardware
• Fast to Moderate Fast actions — responsive through the tip for conventional jigging and live bait; enough backbone throughout to drive hooksets and pump fish

The Right Pick If...

• You fish West Coast conventional — yellowtail, white seabass, tuna, calico — and want a blank built specifically for those applications
• You're running 15-60lb conventional gear and want a rod that's noticeably lighter than what you're currently fishing without giving up strength
• You want Alps or Fuji hardware on a premium blank at a price point below a fully custom build
• You want the Deck Hand blank to build your own custom conventional rod on a proven Black Diamond blank
• You need a longer 8' conventional for open-water offshore applications where casting distance and fight leverage matter more than compactness

Best Fishing Techniques

• Conventional live bait (sardine, mackerel, anchovy): The 7' ML and M models (10-40lb) load correctly for live bait pitches and provide the tip sensitivity to feel subtle takes before the fish commits
• Yo-yo and surface iron: The 7' H and XH models (20-80lb) and the 7'6" XH provide the blank stiffness to work heavy iron and drive hooksets at depth
• Open-water offshore (tuna, yellowtail): The 8' MH through XHJ models (15-60lb) are the primary offshore conventional options — fast action with Fuji hardware for extended fight conditions
• Heavy offshore and jigging: The PSW809XHJ (20-60lb) and PSW760XH (30-80lb) are the dedicated heavy offshore and jigging models where maximum blank strength is the priority
• Custom conventional builds: The PSW809XH-J Deck Hand blank allows rod builders to spec their own reel seat, handle, and guides on the Black Diamond blank

Best Conditions

• Southern California sportboat and long-range — yellowtail, white seabass, calico, tuna
• Open-water offshore — larger tuna and pelagics on 20-60lb conventional gear
• Kelp structure and inshore reef — lighter models (ML, M) for finesse conventional live bait applications
• Heavy jigging and deep-water applications — heavier models (H, XH) for sustained pressure at depth

Best For

• Target Species: Yellowtail, White Seabass, Calico Bass, Halibut, Bluefin Tuna, Yellowfin Tuna, Amberjack, Rockfish
• Techniques: Live Bait, Yo-Yo Iron, Surface Iron, Conventional Jigging, Offshore Trolling
• Angler Level: Intermediate to Advanced — the blank sensitivity and fast action reward proper conventional technique; a natural step up from mid-grade production conventional rods

Key Features

• Toray high-strength carbon + high modulus graphite with proprietary resin layering
• Thinner diameter, lighter, stronger than comparable class conventional blanks
• Fuji Alconite, Alps S-6, and Seaguide guides depending on model
• Alps reel seat / Hypalon handle (7' models) or Fuji reel seat / X-Wrap handle (8' models)
• Deck Hand variant available — blank only, no reel seat, for custom builds
• 11 available models — 7' to 8', 10-80lb line class coverage

Currently Available Models

Full Series Reference

Tackle Express Tips

• Choose your reel seat tier based on your primary application: Alps reel seat models (7' and 7'6") are optimized for inshore and near-shore conventional applications where a lighter, more balanced setup is the priority. The Fuji reel seat models (8') are built for offshore and extended fight scenarios where reel security under sustained load matters more than weight savings. Both tiers use the same Black Diamond blank — the hardware difference is about application fit, not quality level.
• The PSW809H vs PSW809H-XF decision is about hookset style: The 809H (Fast action) gives you a quicker hookset response for reaction bites on conventional gear. The 809H-XF (Moderate Fast) has a softer tip that loads more gradually — better for live bait presentations where you want the fish to fully commit before you feel the load. Both are 20-50lb Heavy models; the action is the only difference.
• Run 40-65lb braid to a heavy fluorocarbon leader on the XH models: The PSW700XH, PSW760XH, and PSW809XHJ are built for heavy applications where braid is the main line. A 15-25ft fluorocarbon top shot in 40-60lb keeps the leader out of your guides on the cast while presenting monofilament to the fish near the terminal tackle. Keep connections clean — a FG or PR knot minimizes guide friction on the cast better than a swivel-to-braid connection.

FAQ

What's the difference between the Alps reel seat models and the Fuji reel seat models?
The Alps reel seat is used on the 7' and 7'6" models — it's a premium conventional reel seat preferred by custom rod builders for its secure lock and low-profile design. The Fuji reel seat is used on the 8' models — Fuji's industry-standard hardware for performance saltwater conventionals. Both are excellent; the distinction reflects the application and rod build philosophy for each length group. The Alps models pair well with lighter to mid-weight conventional reels; the Fuji models are designed for larger conventional reels used in offshore fishing.

What is the Deck Hand variant (PSW809XH-J)?
The Deck Hand variant ships as a finished Black Diamond blank with guides installed but no reel seat fitted — it's for rod builders or anglers who want to mount their own reel seat and handle configuration. If you have a preferred conventional seat or want a custom wrap, this is the model to start with. All other components (guides, blank finish) are identical to the standard PSW809XHJ.

How does the Black Diamond Conventional compare to the Black Diamond Spinning lineup?
Same Toray carbon blank technology and proprietary resin system across both lines. The conventional versions use Alps or Fuji conventional reel seats and are built for conventional fishing applications (live bait, iron, offshore). The spinning versions use Fuji DPS spinning seats and are configured for spinning reels and casting-style fishing. Both deliver the same thin-diameter, lightweight blank performance — choose based on your reel style and technique preference.

United Composites GUSA Graphite Conventional Rods are in a league of their own. Each blank is made up of 100% Multi-Modulus Carbon Construction and utilizing the Dual Carbon Helix Core. They represent the highest quality and construction in our product line. Unlike nearly all of its competitors, these blanks are made of 100% Carbon Graphite. There is no fiberglass in the construction at all.

The rods are fitted with hypalon grips, ALPS aluminum reel seats, and aluminum gimbals as well as 316 Stainless Steel frame ALPS guides. Each rod is wrapped with a metallic blue base wrap and a black top wrap with silver and red detail.

All Rods are packaged with extreme care!

We have a 99% no-breakage delivery rate.

Being fisherman ourselves we take pride in not having rods break during shipping, to ensure they'll be enjoyed and fished. We make sure every rod is wrapped tightly with bubble wrap in the crucial areas and are suspended in a thick rod tube, to keep from being crushed or banged around.

GUSA Graphite Conventional – Hypalon

Saltwater-Ready. Confidence-Built. Axis Series.

There's a specific kind of confidence that comes from picking up a rod and knowing it won't fail you when a yellowtail surges or a white seabass makes a hard run toward the kelp. The Phenix Axis Series Spinning Rod is engineered for exactly that moment. A multi-helix construction using S-glass, T-16 carbon fiber, and graphite composite keeps the blank light and sensitive while giving it the structural backbone to handle saltwater's biggest demands — heavy braid loads, long fights, and repeated punishment in a marine environment.

Why Standard Graphite Falls Short in Saltwater

Pure high-modulus graphite is brittle under impact and lateral stress — exactly the kind of load a big yellowtail or bull calico puts on a rod when it bulldogs toward structure. The Axis solves this with S-glass woven into the composite matrix. S-glass adds flex memory and impact resistance without meaningfully increasing weight or reducing sensitivity. The result is a blank that reads light bites clearly, loads smoothly on long casts, and recovers from the kind of bend that would crack a brittle single-material rod. The multi-helix layup adds hoop strength so the blank doesn't compress or oval under extreme load.

Built for Southern California — and Anywhere Else It's Tough

The HAX lineup was designed around the conditions Southern California saltwater anglers face: kelp paddy fishing for yellowtail, live bait presentations for white seabass, deep drop calico bass, and open-water tuna. Five models cover 7'2" to 8'2", from Medium Heavy (20-40lb) to Medium Light (12-30lb), with moderate-fast action across the board — the action taper that loads smoothly on a live bait pitch and still delivers a fast, decisive hookset. Fuji DPSSD reel seat with EVA handles gives you a secure, lightweight connection that won't rattle or corrode.

Why It Beats the Competition

• S-glass / T-16 carbon / graphite composite — multi-material blank; more impact-resistant and durable than single-material graphite rods in this class
• Multi-helix construction — adds hoop and torsional strength; the blank doesn't twist or compress under heavy load
• Moderate-fast action — the right taper for live bait and iron; loads on the cast, recovers fast on the set
• Fuji DPSSD reel seat — corrosion-resistant, secure, and compatible with the full range of spinning reels used in saltwater
• Thin diameter, lightweight build — fishes all day without fatigue; Phenix's benchmark for the series

The Right Pick If...

• You fish Southern California kelp and offshore structure for yellowtail, white seabass, or calico bass
• You need a spinning rod that handles both live bait presentations and iron jigs without compromising either
• You want a rod built tough enough for repeated saltwater use, not one that needs babying between trips
• You're stepping up from a mid-grade saltwater spinning rod and want to understand what composite construction actually feels like under load
• You run 40-60lb braid and need a guide and reel seat system that handles it reliably

Best Fishing Techniques

• Live bait — anchovy, sardine, mackerel: The moderate-fast action loads naturally on a soft pitch; the fish feels minimal resistance on the take
• Iron jigs (surface iron and yo-yo iron): The 720H and 780H handle heavier iron loads; the stiffness through the mid-section drives long casts and controlled retrieves
• Dropper loop and deep drop rigs: 820MH (20-45lb) is the natural choice for deep calico and rockfish on dropper rigs
• Topwater lures: 820ML (12-30lb) works well for smaller surface presentations; lighter line classes and lure weights

Best Conditions

• Kelp paddy fishing — the backbone handles fish that want to run back into the paddy
• Open-water offshore — surface iron, live bait, and light to medium jig applications
• Rocky reef and structure fishing — the S-glass composite handles the lateral stress of turning fish away from cover
• All-day trips and multi-day sportfishing — the lightweight build reduces fatigue; the durability handles repeated use

Best For

• Target Species: Yellowtail, White Seabass, Calico Bass, Halibut, Tuna, Rockfish
• Techniques: Live Bait, Iron Jigging, Dropper Loop, Topwater, Yo-Yo Iron
• Angler Level: Intermediate to Advanced — the moderate-fast action rewards proper casting and hookset timing; a natural step up for anglers moving from freshwater or entry-level saltwater gear

Key Features

• S-glass, T-16 carbon fiber, and graphite composite blank — impact-resistant and sensitive
• Multi-helix construction — hoop and torsional strength under heavy load
• Moderate-fast action — optimal for live bait and iron applications
• Fuji DPSSD reel seat with EVA handles — corrosion-resistant, secure fit
• Thin diameter, lightweight build — all-day fishability without fatigue
• Five-model lineup — 7'2" to 8'2", Medium Light through Heavy

Models & Specs

Tackle Express Tips

• Match the model to your primary bait size: Anchovy and small sardine fishing? The 720MH (20-40lb) is the most versatile. Larger mackerel or big sardine presentations for white seabass? Step up to the 720H or 780H — the heavier line rating gives you more control on a surging fish near structure.
• Run 40-65lb braid to a 20-40lb fluorocarbon leader for live bait: The Fuji DPSSD guides handle the braid-to-leader connection cleanly. Keep the leader long enough (12–15ft) to stay out of your guides on the cast so you're presenting mono/fluoro to the fish, not braid.
• Don't fight the moderate-fast action — use it: When a yellowtail hits and runs, let the blank load and absorb the initial surge rather than locking down immediately. The S-glass composite gives the rod enough flex memory to recover; the backbone through the lower section will turn the fish when you apply pressure at the right angle.

FAQ

What's the difference between the 720H and 780H — when should I choose the longer rod?
The 780H (7'8") gives you extra casting distance and more leverage on long-range presentations — useful for surface iron at distance or when fishing from a high rail position on a sportboat. The 720H (7'2") is more manageable in tight quarters like a crowded rail or kayak deck. Both handle the same 25-60lb line class.

Is this rod suitable for tuna?
Yes for lighter tuna applications — schoolie bluefin, yellowfin in the 20-40lb range. The 720H and 780H (25-60lb) are the appropriate models. For larger tuna or heavy-duty chunking situations, you'd want to step up to a heavier-rated rod built specifically for that application.

How does S-glass compare to pure graphite in saltwater use?
S-glass adds impact resistance and flex memory that pure graphite lacks. In saltwater — where you're frequently bouncing rods off rails, fighting big fish at odd angles, and dealing with corrosive conditions — the composite outperforms single-material graphite for durability. You give up a small amount of raw sensitivity, but the Axis's T-16 carbon component keeps sensitivity at a level that's fully adequate for all live bait and iron applications.

Built to Go Where the Fish Are Hardest to Stop.

Saltwater fishing puts a different kind of demand on a rod than freshwater does. The fish are bigger, the line classes heavier, the environments more corrosive, and the margin for blank failure much narrower. The Phenix Black Diamond Spinning Rod is built for exactly that environment. Using Toray's high-strength carbon fibers with a proprietary layering process and Phenix's own resin system, the Black Diamond achieves a blank that's thinner in diameter and lighter in hand than any comparable saltwater rod in its class — while being stronger, not weaker, than what it replaced.

Aerospace Technology, Applied to Saltwater Blanks

The Black Diamond's construction starts with Toray carbon fiber — the same raw material used in aerospace and defense applications where strength-to-weight ratio is non-negotiable. Phenix combines it with a unique layering process and a proprietary resin blend that bonds the fibers differently than standard production rods. The result is a super-strong blank with a thinner wall section and less total weight than previous-generation saltwater graphite blanks. What this means in practice: you fish 15-50lb line without the rod feeling overbuilt in your hands, and the blank telegraphs lure action and fish behavior at a sensitivity level that heavier saltwater rods can't match.

Built for Southern California Saltwater and Beyond

The four-model PSW lineup covers the two primary inshore/offshore spinning applications: a 7'–7'6" Medium range (15-40lb) optimized for live bait, light iron, and versatile inshore use, and an 8' Medium Heavy through Heavy range (15-50lb) for longer presentations, surface iron, open-water tuna applications, and situations where casting distance and fish-fighting leverage matter. Fuji Alconite guides handle braid loads without heat buildup or wear, and the Fuji DPS reel seat provides a corrosion-resistant, secure connection for the full-size spinning reels the 15-50lb line class demands.

Why It Beats the Competition

• Toray high-strength carbon fiber — aerospace-grade raw material; higher tensile strength per gram than standard graphite composites
• Proprietary layering process and resin system — Phenix's "secret sauce"; thinner diameter and lighter weight than comparable saltwater blanks without sacrificing strength
• Fuji Alconite guides — lighter than SiC with excellent heat dissipation; fully compatible with heavy braid in saltwater environments
• Fuji DPS reel seat — corrosion-resistant, secure under heavy reel loads; the standard for quality saltwater spinning builds
• Inshore and offshore capable — 4 models covering 7' to 8', Medium through Heavy; one lineup that bridges live bait and open-water applications

The Right Pick If...

• You fish Southern California inshore and offshore — yellowtail, white seabass, calico, tuna — and want a spinning rod that handles all of it
• You run 30-50lb braid to a fluorocarbon leader and need guides and a reel seat that hold up to that load over time
• You want a saltwater spinning rod that's noticeably lighter in hand than what you're used to without giving up strength or backbone
• You fish surface iron, live bait, and poppers from a sportboat or kayak and need one rod that covers those scenarios
• You're ready to upgrade from a mid-grade saltwater blank and want to feel the difference Toray carbon makes under load

Best Fishing Techniques

• Live bait (anchovy, sardine, mackerel): The 700M and 760M (15-40lb, Moderate Fast / Fast) load softly on a live bait pitch and absorb the initial surge of a yellowtail or white seabass without ripping the bait
• Surface iron and yo-yo iron: The 808MH (Medium Heavy, Fast) delivers the backbone to work surface iron at distance and drive hooksets on long-range retrieves
• Poppers and topwater lures: The 8' models give you the rod length and tip recovery speed to work poppers with authority; the Alconite guides handle repeated braid-to-lure stress
• Open-water tuna (schoolie to mid-range): The 809H (Heavy, Fast, 20-50lb) is the dedicated tuna model — the backbone turns fish that run hard and the tip recovers fast enough for a quick reset
• Calico bass and halibut: The 700M is the most versatile near-shore model; works equally well on dropper rigs, live bait, and iron for calico and halibut

Best Conditions

• Southern California kelp and offshore structure — yellowtail, white seabass, calico bass
• Open-water offshore — tuna on surface iron, poppers, and live bait
• Sportboat and long-range fishing — the lightweight blank reduces fatigue over multi-day trips
• Shore and jetty fishing — the 8' models give you the reach and power for longer shore presentations

Best For

• Target Species: Yellowtail, White Seabass, Calico Bass, Halibut, Bluefin Tuna, Yellowfin Tuna, Rockfish
• Techniques: Live Bait, Surface Iron, Yo-Yo Iron, Poppers, Topwater, Dropper Loop
• Angler Level: Intermediate to Advanced — the blank sensitivity and fast action reward proper technique; an excellent choice for serious SoCal saltwater anglers stepping up to a premium spinning rod

Key Features

• Toray high-strength carbon fiber with proprietary layering and resin system
• Thinner diameter and lighter weight than comparable class saltwater blanks
• Fuji Alconite guides — lightweight, heat-resistant, braid-compatible
• Fuji DPS reel seat — corrosion-resistant, secure under heavy spinning reel loads
• Four models — 7' to 8', Medium through Heavy, inshore and offshore applications

Models & Specs

Tackle Express Tips

• Match the model to your primary species and presentation: The 700M (Moderate Fast) is the most versatile live bait and inshore model — the softer tip loads on a sardine pitch and absorbs the take. The 760M (Fast) adds a little more backbone for iron and larger baits. The 808MH and 809H are dedicated to power applications — surface iron, poppers, and open-water tuna where you need casting distance and fish-fighting leverage.
• Run 40-65lb braid to a 25-40lb fluorocarbon leader: The Black Diamond's Fuji Alconite guides handle the braid-to-leader connection cleanly. Keep the leader long enough (12–15ft) to stay out of your guides on the cast — the fish see fluorocarbon, not braid, and the leader absorbs chafe from structure and teeth.
• Rinse thoroughly after every saltwater use: The Fuji DPS seat and Alconite guides are corrosion-resistant, not corrosion-proof. A freshwater rinse after every trip — especially around the reel seat hood and guide feet — extends the hardware life significantly on a rod in this price range.

FAQ

What's the difference between the 700M Moderate Fast and the 760M Fast action?
The 700M's Moderate Fast action has a more forgiving tip that loads better on soft live bait presentations — it's the better choice when you're pitching anchovies or sardines and want the fish to take the bait without feeling the rod load. The 760M's Fast action stiffens the tip for better iron control and a quicker hookset on reaction strikes. If you fish primarily live bait, start with the 700M. If you split time between live bait and iron, the 760M is more versatile.

Is the Black Diamond suitable for shore fishing?
Yes — the 8' models (808MH, 809H) are particularly well-suited for shore and jetty fishing where casting distance and line management from elevation matter. The extra length gives you clearance over rocks and structure, and the heavier line ratings handle the larger terminal tackle typically used from shore.

How does the Black Diamond compare to other Phenix saltwater spinning rods like the Axis?
The Black Diamond uses a more advanced blank construction — Toray high-strength carbon with Phenix's proprietary layering and resin system — compared to the Axis's S-glass/T-16 carbon composite. The Black Diamond is thinner in diameter, lighter in hand, and built for higher-end saltwater applications where blank performance justifies the price premium. The Axis is a strong mid-tier saltwater option; the Black Diamond is the step up for serious offshore use.

Purpose-Built for West Coast Inshore Saltwater

The Shimano Teramar West Coast Inshore Casting Rods are purpose-built for the unique demands of West Coast inshore saltwater fishing. Designed specifically for targeting California halibut, calico bass, white seabass, and other hard-fighting inshore gamefish, these casting rods deliver the power, sensitivity, and durability needed for everything from working swimbaits to throwing surface irons. The Teramar West Coast represents Shimano's commitment to creating specialized tools for West Coast inshore anglers.

Advanced Blank Technology

• TC4 Construction: High-modulus carbon fiber blank provides exceptional strength-to-weight ratio for powerful hooksets and fish-fighting capability
• Spiral-X Core Technology: Multi-directional carbon fiber construction eliminates blank twist and increases power transmission for better control
• Hi-Power X: Additional layer of carbon tape reinforcement prevents blank ovalization under load for maximum power and responsiveness
• Tapered Blank Design: Progressive taper optimized for West Coast inshore techniques provides ideal balance of power and sensitivity
• Lightweight Construction: Reduced weight minimizes fatigue during long days of casting

Premium Components and Construction

• Fuji Alconite Guides: Lightweight, corrosion-resistant guides with smooth inserts reduce friction and improve casting distance
• Fuji Reel Seat: Durable, corrosion-resistant reel seat provides secure reel mounting in saltwater conditions
• EVA Grips: Comfortable, non-slip EVA foam grips provide secure handling even when wet
• Saltwater-Resistant Hardware: All components selected for maximum corrosion resistance in harsh saltwater environments
• Quality Construction: Precision manufacturing ensures consistent performance and long-term durability

West Coast Inshore Applications

The Teramar West Coast Inshore excels across the full range of West Coast inshore techniques. Work swimbaits for California halibut in the surf and bays, throw surface irons for calico bass around kelp, cast live bait for white seabass, fish soft plastics around structure, or target any inshore species from San Diego to the Bay Area. The specialized design handles the unique demands of West Coast inshore fishing with precision and power.

Multiple Models for Specific Applications

Available in multiple lengths and power ratings to match your specific West Coast inshore fishing applications. From medium-power models for finesse presentations to heavy-power rods for big swimbaits and trophy fish, each model is optimized for specific techniques while maintaining the premium performance that defines the Teramar West Coast series.

Key Features

Shimano Quality and Innovation

Shimano has been the global leader in fishing tackle innovation for decades, and the Teramar West Coast continues this proud tradition with technologies specifically designed for West Coast inshore saltwater fishing. Every component is engineered to exacting standards and tested under real-world conditions from Southern California to Northern California to ensure reliable performance season after season. From weekend anglers to serious inshore specialists, the Teramar West Coast delivers the precision and durability that West Coast anglers demand.

Experience the purpose-built performance that West Coast inshore specialists trust. The Shimano Teramar West Coast Inshore Casting Rods aren't just fishing rods—they're precision tools designed specifically for California inshore gamefish.

Dominate West Coast inshore waters with Shimano Teramar—where specialized design meets saltwater performance.

The Major Craft Triplecross Seabass Series Spinning Surf Rods, consisting of 5 models ranging from ML to M power and 8'6'' to 10'6'' in length. Each rod is outfitted with FUJI SIC K-guides and reel seat. Choose the most suitable model based on the desired lure weight and fishing conditions. 

With the TCX-902ML & TCX-962ML being the most ideal for fishing the local surf here in California with your favorite jerkbaits or jigs, targeting white seabass, halibut, calico bass and whatever wants to bite.

TCX-902ML - Length: 9'0", Lure: 10g-30g (Aprx. 1/4oz-1oz), Line: 0.8 P.E.-2.0 P.E. (10-20lb Braid) , Action: Regular Fast

TCX-962ML - Length: 9'6", Lure: 10g-30g (Aprx. 1/4oz-1oz) , Line:0.8 P.E.-2.0 P.E. (10-20LB Braid) Action: Regular Fast

Purpose-Built for West Coast Saltwater Fishing

The Shimano Teramar WC West Coast C Conventional Rods are purpose-built for the unique demands of West Coast saltwater fishing. Designed specifically for targeting California yellowtail, tuna, dorado, and other hard-fighting Pacific gamefish, these conventional rods deliver the power, sensitivity, and durability needed for everything from surface iron fishing to deep-water jigging. The Teramar WC represents Shimano's commitment to creating specialized tools for West Coast anglers.

Advanced Blank Technology

• TC4 Construction: High-modulus carbon fiber blank provides exceptional strength-to-weight ratio for powerful hooksets and fish-fighting capability
• Spiral-X Core Technology: Multi-directional carbon fiber construction eliminates blank twist and increases power transmission for better control
• Hi-Power X: Additional layer of carbon tape reinforcement prevents blank ovalization under load for maximum power and responsiveness
• Tapered Blank Design: Progressive taper optimized for West Coast techniques provides ideal balance of power and sensitivity
• Lightweight Construction: Reduced weight minimizes fatigue during long days of casting and jigging

Premium Components and Construction

• Fuji Alconite Guides: Lightweight, corrosion-resistant guides with smooth inserts reduce friction and improve casting distance
• Fuji Reel Seat: Durable, corrosion-resistant reel seat provides secure reel mounting in saltwater conditions
• EVA Grips: Comfortable, non-slip EVA foam grips provide secure handling even when wet
• Saltwater-Resistant Hardware: All components selected for maximum corrosion resistance in harsh saltwater environments
• Quality Construction: Precision manufacturing ensures consistent performance and long-term durability

West Coast Fishing Applications

The Teramar WC Conventional Rods excel across the full range of West Coast saltwater techniques. Work surface irons for yellowtail and tuna with powerful hooksets, drop yo-yo jigs to deep-feeding fish with precision, cast live bait to feeding schools with accuracy, fish heavy jigs around kelp and structure, or target trophy gamefish from party boats to private vessels. The specialized design handles the unique demands of West Coast fishing from San Diego to the Channel Islands and beyond.

Multiple Models for Specific Applications

Available in multiple lengths and power ratings to match your specific West Coast fishing applications. From lighter models for finesse presentations to heavy-duty rods for trophy fish and deep-water jigging, each model is optimized for specific techniques while maintaining the premium performance that defines the Teramar WC series.

Tackle Express Tips:

• Pair the Shimano Teramar rod with a Shimano Tranx 300 or Tranx 400 for the best fit
• Protect your rod with a Stick Jacket and keep it from getting scratched or breaking guides while in transit

Key Features

Shimano Quality and Innovation

Shimano has been the global leader in fishing tackle innovation for decades, and the Teramar WC continues this proud tradition with technologies specifically designed for West Coast saltwater fishing. Every component is engineered to exacting standards and tested under real-world conditions from Southern California to Baja to ensure reliable performance season after season. From weekend anglers to tournament professionals, the Teramar WC delivers the precision and durability that serious West Coast anglers demand.

Experience the purpose-built performance that West Coast specialists trust. The Shimano Teramar WC West Coast Conventional Rods aren't just fishing rods—they're precision tools designed specifically for Pacific gamefish.

Dominate West Coast waters with Shimano Teramar WC—where specialized design meets saltwater performance.

Purpose-Built for West Coast Inshore Finesse

The Shimano Teramar West Coast Spinning Rods are purpose-built for the unique demands of West Coast inshore finesse fishing. Designed specifically for targeting California halibut, calico bass, spotted bay bass, and other hard-fighting inshore gamefish, these spinning rods deliver the sensitivity, power, and versatility needed for everything from finesse soft plastics to live bait presentations. The Teramar West Coast represents Shimano's commitment to creating specialized tools for West Coast inshore anglers.

Advanced Blank Technology

• TC4 Construction: High-modulus carbon fiber blank provides exceptional strength-to-weight ratio for powerful hooksets and fish-fighting capability
• Spiral-X Core Technology: Multi-directional carbon fiber construction eliminates blank twist and increases power transmission for better control
• Hi-Power X: Additional layer of carbon tape reinforcement prevents blank ovalization under load for maximum power and responsiveness
• Tapered Blank Design: Progressive taper optimized for West Coast inshore finesse techniques provides ideal balance of power and sensitivity
• Lightweight Construction: Reduced weight minimizes fatigue during long days of casting and finesse fishing

Premium Components and Construction

• Fuji Alconite Guides: Lightweight, corrosion-resistant guides with smooth inserts reduce friction and improve casting distance
• Fuji Reel Seat: Durable, corrosion-resistant reel seat provides secure reel mounting in saltwater conditions
• EVA Grips: Comfortable, non-slip EVA foam grips provide secure handling even when wet
• Saltwater-Resistant Hardware: All components selected for maximum corrosion resistance in harsh saltwater environments
• Quality Construction: Precision manufacturing ensures consistent performance and long-term durability

West Coast Inshore Finesse Applications

The Teramar West Coast Spinning excels across the full range of West Coast inshore finesse techniques. Work soft plastics for California halibut in the surf and bays, fish finesse presentations for calico bass and spotted bay bass around structure, cast live bait for white seabass, throw light lures for bonito and barracuda, or target any inshore species with finesse presentations from San Diego to the Bay Area. The specialized design handles the unique demands of West Coast inshore finesse fishing with exceptional sensitivity and control.

Multiple Models for Specific Applications

Available in multiple lengths and power ratings to match your specific West Coast inshore fishing applications. From light-power models for ultra-finesse presentations to medium-heavy models for larger baits and trophy fish, each model is optimized for specific techniques while maintaining the premium performance that defines the Teramar West Coast series.

Key Features

Shimano Quality and Innovation

Shimano has been the global leader in fishing tackle innovation for decades, and the Teramar West Coast continues this proud tradition with technologies specifically designed for West Coast inshore saltwater fishing. Every component is engineered to exacting standards and tested under real-world conditions from Southern California to Northern California to ensure reliable performance season after season. From weekend anglers to serious inshore specialists, the Teramar West Coast delivers the precision and sensitivity that West Coast finesse anglers demand.

Experience the purpose-built finesse performance that West Coast inshore specialists trust. The Shimano Teramar West Coast Spinning Rods aren't just fishing rods—they're precision tools designed specifically for California inshore finesse fishing.

Dominate West Coast inshore finesse with Shimano Teramar—where specialized design meets saltwater sensitivity.

Saltwater-Tough Performance for Inshore Dominance

The Shimano Teramar Inshore Series Spinning Rods deliver the perfect combination of power, sensitivity, and corrosion-resistant durability needed to excel in demanding saltwater environments. Engineered specifically for inshore fishing with advanced Spiral X Core and Hi-Power X blank technology, these versatile spinning rods provide the backbone to handle hard-fighting coastal gamefish while maintaining the sensitivity to detect subtle bites and feel structure with precision.

Advanced Blank Technology

• Spiral X Core Construction: Multi-directional carbon fiber layering eliminates blank twist and maximizes power transmission for solid hooksets and fish-fighting control
• Hi-Power X Reinforcement: X-wrap carbon tape in critical stress zones prevents blank deformation under load and increases lifting power
• High-Modulus Graphite: Responsive blank delivers exceptional sensitivity for detecting strikes while providing the backbone to control powerful inshore species
• Optimized Taper Design: Progressive action provides versatility across multiple inshore techniques and lure types

Saltwater-Ready Components

• Fuji Alconite Guides: Corrosion-resistant stainless steel frames with smooth, durable inserts handle the rigors of saltwater fishing
• Fuji Reel Seat: Corrosion-resistant construction with cushioned hoods provides secure reel mounting in harsh saltwater conditions
• Premium Cork Grips: High-density cork provides superior grip control even when wet
• Saltwater-Resistant Finish: Durable coating protects the blank from corrosion and UV damage

Built for Inshore Versatility

Whether you're working soft plastics for redfish in shallow grass flats, casting topwater plugs for explosive speckled trout strikes, throwing jerkbaits for snook along mangrove shorelines, fishing live bait for flounder in coastal bays, or battling striped bass in rocky surf, the Teramar Inshore delivers the performance serious saltwater anglers demand. Multiple power ratings and lengths provide options for everything from finesse presentations to power fishing applications in challenging inshore environments.

Technique-Specific Performance

The Teramar Inshore series offers specialized models optimized for specific inshore techniques. Lighter power ratings excel with soft plastics, topwater lures, and finesse presentations, while medium-heavy and heavy models provide the backbone needed for working larger swimbaits, throwing heavy jigs, and controlling powerful fish around structure. The responsive blanks telegraph every bottom contact, strike, and head shake with clarity, giving you the information needed to adjust your presentation and trigger more strikes.

Why Inshore Anglers Choose Teramar

Professional guides and serious inshore enthusiasts trust the Teramar series because it consistently delivers reliable performance in harsh saltwater conditions. The combination of advanced blank technology, corrosion-resistant components, and proven Shimano quality creates a rod that performs flawlessly day after day, season after season. The exceptional sensitivity lets you feel subtle bites and structure changes, while the powerful blank provides the authority to drive hooks home and control hard-fighting gamefish in current, around structure, and in open water.

Experience the difference that saltwater-specific engineering makes on the water. The Shimano Teramar Inshore Series isn't just an inshore rod—it's a purpose-built tool designed to help you dominate coastal waters.

Conquer inshore waters with Shimano Teramar Inshore Series Spinning Rods—where saltwater toughness meets refined performance.