Rod and Reel Accessories

Abu Garcia Precision Grease is formulated specifically for high-performance fishing reel components — a low viscosity grease engineered to lubricate gears, bearings, and moving parts in baitcast reels without the drag and resistance of heavier general-purpose greases. Heat and cold resistant for consistent performance across a wide range of fishing conditions, with corrosion protection that extends component life in both freshwater and saltwater environments. 1 oz.

Key Features

• Low Viscosity Formula — Lower viscosity than general-purpose greases allows the lubricant to flow into tight tolerances between gears, bearings, and moving parts without creating drag or resistance; critical for high-performance baitcast reels where excess lubricant viscosity reduces casting distance and retrieve smoothness.
• High-Performance Parts — Formulated for the precision tolerances of high-performance reel components — main gears, pinion gears, level wind mechanisms, and bearing races; provides the lubrication film needed to protect metal-on-metal contact points under the sustained load of fighting large fish.
• Heat & Cold Resistant — Maintains consistent viscosity and lubrication performance across a wide temperature range; does not thin out and run in hot summer conditions or thicken and stiffen in cold water winter fishing — critical for year-round reel performance without seasonal re-lubrication.
• Corrosion Protection — Corrosion-inhibiting formula protects metal reel components from rust and oxidation in both freshwater and saltwater environments; extends the service life of gears, bearings, and moving parts exposed to water, humidity, and salt spray.
• Baitcast Reel Optimized — Specifically recommended for baitcast reels where gear and bearing lubrication directly affects casting performance and retrieve smoothness; compatible with Abu Garcia baitcast reels and other high-performance baitcasters requiring precision lubrication.

Best For

• Baitcast Reel Maintenance — Primary application for baitcast reel gear and bearing lubrication during routine maintenance; apply to main gear, pinion gear, level wind worm gear, and bearing races for smooth, quiet operation and maximum casting performance.
• Saltwater Reel Protection — Corrosion-inhibiting formula provides essential protection for reel components exposed to saltwater, salt spray, and high-humidity coastal environments; apply after saltwater use to displace moisture and protect metal components from corrosion.
• Year-Round Use — Heat and cold resistance makes the Precision Grease effective across all seasons without changing lubricants; consistent viscosity from cold water winter fishing through hot summer conditions eliminates the need for seasonal lubrication changes.
• Abu Garcia Reel Service — The manufacturer’s recommended grease for Abu Garcia baitcast reel service; using the correct viscosity and formulation maintains warranty compliance and ensures optimal performance from Abu Garcia reel components.

Lock down your Accurate Ascender reel with confidence using this complete Accurate Ascender Reel Clamp Kit. Designed specifically for Accurate's high-performance Ascender series, this kit delivers rock-solid mounting for battling tuna, yellowtail, and other hard-fighting saltwater gamefish.

What's Included:

• Heavy-duty reel clamp (black finish)
• Mounting studs
• Securing nuts
• Complete hardware for installation

Compatibility:

Important: Narrow versions of Ascender reels do not have stud holes and are not compatible with this clamp kit. Please verify your reel model before ordering.

Performance Advantages:

• Maximum Stability: Eliminates reel movement during high-torque cranking
• Secure Mounting: Rock-solid attachment to rod seat
• Professional-Grade: Trusted by serious saltwater anglers
• Corrosion Resistant: Durable black finish for harsh marine environments
• Complete Kit: All hardware included for installation
• Accurate-Specific Design: Engineered for Ascender series reels

Ideal Applications:

• Offshore fishing
• Tuna fishing
• Yellowtail fishing
• Hard-fighting saltwater gamefish
• High-torque cranking situations
• Heavy drag pressure fishing

Why Use a Reel Clamp?

When you're locked into a battle with powerful offshore species, the last thing you want is your reel shifting or loosening mid-fight. This clamp kit provides maximum stability during high-torque cranking and drag pressure, secure mounting that eliminates reel movement on the rod seat, professional-grade performance trusted by serious saltwater anglers, and durable black finish that resists corrosion in harsh marine environments.

When you need a reel clamp kit with heavy-duty construction and black finish, complete hardware including mounting studs and securing nuts, compatibility with Ascender 300/400 (small) and 500/600 (large) size reels, maximum stability during high-torque cranking and drag pressure, and professional-grade performance for battling tuna, yellowtail, and hard-fighting saltwater gamefish, the Accurate Ascender Reel Clamp Kit is the choice of serious offshore anglers.

Note: Available in Small (300/400) and Large (500/600) sizes. Complete hardware included. Black corrosion-resistant finish. Not compatible with narrow Ascender versions. Verify reel model before ordering.

The Accurate Knot Puller is a great tool to cinch your knots tight without the risk of injuring your hands. The Accurate Knot Puller comes in two different options; a 3 inch and a 4 inch option to choose from! It consists of two pieces that screw together to be compact to fit in a pocket or tackle box.

There is a hole at the top for a key ring and a slot that can be used to put a hook through for cinching down knots at that location. For line connections, the two pieces of the knot puller have a black rubber coating for ease of holding while cinching down knots and to give something for the line to “bite” in to.

Accurate Reel Clamp Kits for Boss series reels also fits all Valiant, Extreme, Dauntless, Fury, and Tern reel models. Select the Narrow option for narrow reels including 400N, 500N, and 600NN.

Accurate Reels has developed a custom reel cover for your reel that fits like a glove.  It's made from neoprene and features a heavy duty composite ring for hooking lures or hooks when used on a rod and reel.  

The rear cover wraps around the back of the reel or rod and secures it so it won't get lost.  It features the accurate logo and signature red and black for a sleek look.

Small: Fits 300

Medium: Fits 400, 400N, 500N and 500

Large: Fits 600N, 600, 600W, 30N and ATD-6

X-Large: Fits BX2-30, ATD-12, ATD-30 and ATD-50

The AFTCO Alijo Fighting Day Belt is designed for use with 20-lb. to 50-lb.lines and is the perfect "day belt" for stand-up fishing against sailfish, dolphin, kingfish, small tuna, yellowtail and other smaller to medium-sized gamefish.  Stamped from pure marine grade gold anodized aluminum with a super-comfortable over-molded, closed cell polyurethane pad, the Alijo fishing belt accommodates the same "Quick Clip" nylon straps as the larger AFTCO fighting belts.  The stainless steel gimbal cross pin is removable, but unique is the thermal-formed nylon liner inside the aluminum gimbal pocket that helps resist scarring.  The Alijos fishing rod holder belt is lightweight and easy to wear, yet offers the same heavy-duty features of the larger AFTCO fishing rod holder belts.

• The premier day belt for use with 20-lb to 50-lb tackle.
• Thick, closed-cell EVA foam pad is molded on backside with vent slots and contours engineered for superior comfort.
• Stainless steel gimbal pin can be removed.
• Gimbal pocket lined with thermal-formed nylon to resist scarring.
• Double box-stitched ultra heavy-duty adjustable 2” nylon web straps.
• Lightweight stamped aluminum front plate deeply anodized in a rich gold finish for extreme durability and corrosion resistance.
• Adjustable one size fits most (28-50” waist).

The AFTCO Goldfinger Outrigger release clip should be attached directly to the outrigger halyard without the use of swivels. The adjustment-slider end of the clip needs to be "up" towards the tip of the outrigger. For fixed position bait trolling,the fishing line should be twisted 5 to 10 times before hooking loop over the clip's bail. The line may also be passed over the bail without twists to allow for adjustment of baits or lures.

1 Clip Per Pack

• Super lightweight design
• 12 Tension settings
• Oversized, polished, Gold Titanium-Nitride Coate

The AFTCO Roller Troller Outrigger Clips helps you position a trolling lure from an outrigger by simply reeling in or letting out line right through the clip, where the line rides safely on a roller that features silky-smooth action. The clip's micro-tension adjustment is positive yet sensitive over a wide range of settings, and once the tension is set, our precision-engineered latching system releases your line repeatedly at exactly the same pull to assure fewer missed strikes and less broken line and gear.

2 Clips Per Pack

• AFLON™ bearing
• Improved Micro-tension adjustment

Atlas Mike’s Magic Thread is the ultimate solution for securing bait quickly and easily—no knots needed! Whether you're wrapping roe bags, liver, shrimp, or soft baits, this elastic thread gives you a strong, secure hold with just a few wraps and a quick pull to tighten. Ideal for freshwater and saltwater anglers alike, Magic Thread keeps your bait in place longer so you can focus on fishing.

Key Features:

• No Knots Required – Simply wrap, pull, and it holds tight!

• Versatile Use – Perfect for securing roe, liver, shrimp, or soft baits.

• Strong & Stretchy – Durable elastic thread stretches and grips securely.

• Mess-Free Application – Keeps your hands clean while baiting.

• Available in Multiple Colors – Choose the color that best matches your bait presentation.

Perfect for salmon, steelhead, trout, catfish, and more, Atlas Mike’s Magic Thread is a must-have in every angler's tackle box. Fast, easy, and reliable—just wrap it up and fish on!

Quantity 1

Avet Reel Bags are high-quality padded nylon soft-sided cases built to organize and protect your reels during travel and storage. The main cargo area features movable padded dividers with hook-and-loop attachments so you can configure the compartments to fit your reels. Multiple roomy zippered pockets handle leaders, tools, manuals, and accessories. A wide, comfortable adjustable shoulder strap with quick-release buckles makes transport easy.

Made from heavy-duty black nylon with a color-embroidered Avet marlin logo on the front. Removable shoulder strap included.

Please review dimensions carefully before ordering — customers are often surprised by the size of the Large case.

Key Features

• Padded nylon construction — heavy-duty protection for travel and storage
• Movable padded dividers — hook-and-loop attachments for custom reel compartment configuration
• Multiple zippered pockets — store leaders, tools, manuals, and accessories
• Adjustable shoulder strap — wide, comfortable, with quick-release buckles; removable
• Color-embroidered Avet marlin logo on front
• 2 sizes available — Medium and Large

Size Guide

Note: Free returns are not available on this product. Oversize shipping charges will be applied at checkout.

Avet Reel Clamp Kits are precision-machined from the same 6061-T6 aircraft-grade billet aluminum as Avet reels themselves, providing a strong, corrosion-resistant connection between your reel and rod. Available in three kit types across three reel size classes, with colored clamp kits offered in multiple anodized finishes to match your reel.

Important: These clamp kits do NOT fit SXJ Raptor or HXJ reels. All other clamps fit Raptor and G2 series reels. HX clamp kits cover the full HX series including HXJ and HXW. Colors may vary and photos may not represent color accurately.

Kit Types

• Screw Set — Replacement screws only. Fits SX, MXJ, MXL reels.
• Stud and Nut Set — Replacement studs and nuts only. Fits JX, LX, HX or EX reels (select correct size).
• Colored Clamp Kit — Full clamp with hook/jig holder (no screws or tools included). Available in multiple anodized colors. 1 kit per bag.

Compatibility Guide

The Avet Reel Cover is custom-made for Avet reels but fits most other brands as well. Constructed from neoprene — the same material used in wetsuits — it provides durable, form-fitting protection for your reel. A Velcro band wraps around the handle to keep the cover secure, and a ring on top lets you clip your lure or hook while the reel is still on the rod. Available in five sizes to fit everything from compact baitcasters to large offshore reels.

The Small size also works great on low-profile baitcasting reels — we've used it on everything from Daiwa 300s to Shimano Curados with a solid fit.

Key Features

• Neoprene construction — durable, form-fitting protection
• Velcro handle band — wraps around the handle to keep cover in place
• Top lure ring — clip your hook or lure while the reel is on the rod
• 5 sizes available — fits Avet SX through EX50/EXW50 and most other brands

Size Guide

Easily measure your catches with the compact and lightweight Battlestar 28" Fish Measure Tape. With a slim 3" width and minimal memory, it unrolls and lays flat, taking up minimal space in your surf pack. Get ready to qualify a legal White Sea Bass with ease.

• 3" wide
• 0.93oz
• Measures to 28"

Keep your favorite bottled or canned beverage cold with these neoprene coolers. Features the original one color Calcutta logo and solid bottom.

Calcutta Can Cooler Features:

• 3mm Neoprene
• Solid Round Bottom
• One color Original Calcutta Logo

The Cork Puppy Reel Clamp is designed for west coast jig fishermen and long-cast anglers using deckhand-style rods with no reel seat. These rods require a rod clamp to mount the reel, and the Cork Puppy solves that problem cleanly — locking the reel in place without twisting, turning, or crushing the blank, in a low-profile design that keeps the setup comfortable and balanced for longer casts.

Machined from 6061-T6 aluminum with type II anodizing. Available in three sizes measured by the rod's diameter at the intended mount point.

Key Features

• Locks reel in place — won't twist or turn
• Won't crush the blank
• Low profile — comfortable, balanced feel
• Machined 6061-T6 aluminum with type II anodizing
• 3 sizes: 25mm, 28mm, 31mm
• Color: Black only

Size Guide

Measure the rod's diameter at the point where you intend to mount the reel. To convert inches to mm, multiply by 25.4. If you don't have calipers, wrap a piece of string around the rod at the mount point, mark where it meets, measure the length, and divide by 3.14 to get the diameter.

Costa Hermit Cloth Wipe makes  always having a lens cloth handy. keep one in your car, another in the boat, RV, backpack, purse, etc.  The soft plastic case has the cloth attached inside so you can't loose it.  This keeps the cloth from getting dirty so when you clean your glasses you won't scratch them or smear.  The clip allows you to attach it to waders or anywhere you may need it within easy reach.  Try one out, we love them at Tackle Express and we think you will too.

FEATURES

• Branded Silicone Casing
• Attached Clasp
• Solid Microfiber Cleaning Cloth

Description:

The Costa Megapren Retainer slides onto frame arms and grip tight. The wide design makes them comfortable when glasses are on, or hanging around your neck.

FEATURES

• 3mm Thick Neoprene Retainer
• 1.25” wide x 17” long
• Sublimated Graphic with Costa Logo and Wordmark
• Embroidered Costa Logo

Description:

Costa Recycled Microfiber Pouch.

FEATURES

• Regular Fit
• Men's Cut
• Taped neck and shoulder seams
• Printed Design
• 100% Preshrunk Cotton. 6 OZ
• Machine wash cold, inside out, with like colors. Tumble dry low. Iron inside out on low setting. Do not use bleach. Do not dry clean.

Details:

Color: 

Costa Blue

Item No: 

KC 01PK

Description:

• Costa Clarity Kit
• Micro-Fiber Cleaning Cloth
• Anti-reflective lens cleaner for glass or plastic lenses
• Durable carrying case