Saltwater Conventional Rods

One Composite Blank Family, 20 lb to 200 lb

Phenix Axis Conventional Rods are built from a composite blend of S-Glass and T-16 carbon fiber with multi-helix construction — a layup Phenix developed for the strength-to-weight demands of Southern California saltwater. The series runs fourteen models from 7'2" to 8', covering everything from a 20-40 lb flylined bait stick to an 80-200 lb rail rod, so you can build an entire spread out of one blank family.

Why Anglers Reach for the Axis

Glass gives you forgiveness and lifting power. Carbon gives you the light weight and responsiveness to fish all day and feel the bite. Most rods pick one. Every blank in the Axis series blends both, which is why the line diameter stays thin for the line class — you get castability that pure glass can't match and a backbone that pure graphite gives up.

The Problem With Single-Material Blanks

An all-graphite conventional rod feels great until a fish sounds under the boat and you need sustained lifting power — then it either folds or snaps. An all-glass rod will lift anything but casts like a broomstick and wears you out by mid-morning. Multi-helix composite construction wraps both materials so the blank resists twisting under angled pressure, which is the exact load a conventional rod sees when a fish runs down the side of the boat.

What Sets It Apart

• S-Glass and T-16 carbon fiber composite in every model
• Multi-helix construction engineered for saltwater loads
• Thin blank diameter for the line class across the whole range
• Fourteen models, 7'2" to 8', spanning 20-40 lb through 80-200 lb
• Extended-foregrip rail configurations available in the heavier classes
• Includes the 7'6" 50-100 lb Guadalupe Special

The Right Pick If…

• You fish SoCal sport boats, overnight trips, or long range
• You want one blank family covering inshore through offshore instead of a mismatched rack
• You want composite forgiveness without a telephone-pole blank
• You'd rather buy a rod rated honestly to your line class than overbuy

Choosing Your Model

• Medium Heavy, 20-40 lb (HAX-720MH, HAX-780MH): Flylined sardine and mackerel, inshore yellowtail, calico bass, white seabass. This is the bait stick, not a rail rod.
• Heavy, 25-60 lb (HAX-720H, HAX-780H): Larger baits, yo-yo iron, bigger yellowtail and school-grade tuna.
• Extra Heavy, 30-80 lb (HAX-720XH, HAX-780XH): Heavy iron and mid-grade tuna. The top of the range you can comfortably fish off the rod rather than off the rail.
• 2X Heavy, 40-100 lb (HAX-720X2H, HAX-760X2H Guadalupe Special, HAX-780X2H): Where the rail tier starts. Extended foregrip, built for bluefin off the rail.
• 3X Heavy, 60-130 lb (HAX-720X3H, HAX-760X3H, HAX-800X3H): Long-range bluefin. The 8'0" gives you the most blank outside the rail.
• 4X Heavy, 80-200 lb (HAX-C720X4H, HAX-760X4H): Top of the series. Cow-grade bluefin and the heaviest long-range work.

Why the Heavy Models Are So Long

On a rail rod, a large share of the length is foregrip. Once that foregrip is laid on the rail, you may have only four or five feet of blank actually fighting the fish. The more rod you have outside the rail on the water side, the more the fish has to work against — and the fulcrum becomes the boat instead of your arms and back. That's why the 2X Heavy and above run long, and why length on those models isn't about casting distance.

Best Techniques

• Flylined bait: Medium Heavy and Heavy models — enough tip to cast a live sardine, enough backbone to turn a yellowtail out of the kelp
• Yo-yo iron: Heavy and Extra Heavy — handles the load of ripping heavy iron up off the bottom all day
• Rail fishing: 2X Heavy and up — brace the extended foregrip on the rail and let the boat do the lifting
• Heavy live bait and kite: 3X and 4X Heavy — the 130 lb and 200 lb classes

Best Conditions

• Inshore kelp and structure where you have to turn a fish fast — lighter classes
• Offshore and overnight sport boat trips — mid classes
• Long range and Guadalupe Island grounds — 2X Heavy and up
• Any situation where fighting a fish off the rail beats fighting it off your arms

Best For

• Species by class: Calico bass, white seabass and inshore yellowtail on 20-60 lb models; wahoo, dorado and school tuna on 30-80 lb; bluefin and yellowfin tuna on 40-200 lb
• Techniques: Flylined bait, yo-yo iron, rail fishing, heavy live bait, kite fishing
• Environments: Kelp beds, inshore structure, offshore, sport boat, long range, Guadalupe and Mexican waters

Key Features

• S-Glass and T-16 carbon fiber composite construction
• Multi-helix blank layup
• Lengths from 7'2" through 8'
• Line ratings from 20-40 lb through 80-200 lb
• Six power classes: Medium Heavy through 4X Heavy
• Extended-foregrip rail builds in the 2X Heavy class and above
• Fourteen models in the series
• Guadalupe Special available in 7'6" 50-100 lb

Models & Specs

Tackle Express Tips

• Buy for the trip you actually book: If you're fishing half-days and overnights inshore, the Medium Heavy and Heavy do the job. The rail classes only earn their money on long range and heavy bluefin.
• Length on the heavy models is about the rail, not casting: The 7'6" and 8'0" heavy blanks aren't for bombing baits — they're for keeping blank on the water side of the rail during a fight.
• Match your line to the rating on the blank: A 40-100 lb rod fished with 130 lb line isn't a 130 lb rod. Fish it honestly and the composite does what it was designed to do.

FAQ

Which Axis models are rail rods?
The 2X Heavy class and above — 40-100 lb, 60-130 lb, and 80-200 lb. Those get the extended foregrip designed to brace against the boat's rail. The Medium Heavy, Heavy, and Extra Heavy models are conventional rods fished off the rod, not off the rail.

What does the S-Glass and T-16 carbon blend actually do?
S-Glass adds forgiveness and lifting power under sustained load. T-16 carbon fiber keeps the blank light and responsive. Multi-helix construction wraps the material so the blank resists twisting under angled pressure. Every model in the series uses the same blend.

How do these ship?
Every rod is wrapped in bubble wrap at the crucial points and suspended inside a thick rod tube so it can't be crushed or knocked around in transit. Note that rods over 8' do not qualify for free shipping.

The Okuma PCH Custom Conventional Rods are designed specifically for West Coast anglers. The PCH Custom is lightweight and sensitive with enough strength and backbone to get fish to the boat, making it the perfect choice for offshore trolling and conventional fishing applications.

The backbone to the PCH Custom rods is the patented blank construction process, called Unidirectional Fiber Reinforcement or UFR-II. This patented process blends unidirectional fiber over 24-ton carbon in the extended tip section of the rod to increase lifting strength and power. UFR-II provides strength without sacrificing sensitivity, so anglers can feel the lightest of bites while having the power to battle trophy fish.

Updated Models: Okuma changed to updated models that have a light gray Okuma aluminum reel seat instead of the previous dark gray ALPS reel seat (January 2026).

Key Features:

• UFR-II Technology: Unidirectional Fiber Reinforced rod tip increases lifting strength and power
• 24-Ton Carbon Blanks: Extremely lightweight and responsive construction
• 3K-Woven Carbon Wrap: Outer blank wrap improves hoop strength
• Fuji K-Guides: M, MH, and H models feature Alconite inserts
• ALPS HXN Guides: XH models feature Zirconium inserts for heavy-duty applications
• Machined Aluminum Reel Seats: Updated light gray Okuma aluminum reel seats on all models
• Tapered TPE Grips: 7' rods feature fore and rear grips for comfort
• Tapered Shrink Tube: 8' rods feature durable, comfortable grip material
• ALPS Non-Skid Butt Caps: Rubber butt caps on all PCH models
• Limited Lifetime Warranty: Backed by Okuma quality assurance

Specifications:

• Blank Material: 24-ton carbon with UFR-II technology
• Blank Wrap: 3K-woven carbon for improved hoop strength
• Guide System: Fuji K-guides with Alconite inserts (M, MH, H) or ALPS HXN with Zirconium (XH)
• Reel Seat: Machined aluminum Okuma reel seats (updated light gray finish)
• Grip Material: Tapered TPE (7' models) or tapered shrink tube (8' models)
• Butt Cap: ALPS non-skid rubber
• Target Species: Yellowtail, white seabass, tuna, and other pelagic species

Performance Advantages:

• Lightweight & Sensitive: Feel the lightest bites while maintaining power
• Increased Lifting Strength: UFR-II technology provides superior fish-fighting power
• West Coast Specific: Designed for California and West Coast fishing conditions
• Improved Hoop Strength: 3K-woven carbon wrap prevents blank failure
• Versatile Guide Options: Alconite for lighter models, Zirconium for heavy-duty XH

Ideal Applications:

• West Coast offshore trolling for yellowtail and tuna
• Conventional fishing for white seabass and pelagic species
• Offshore fishing requiring lightweight rods with maximum power
• Targeting trophy fish from boats
• Situations requiring sensitivity and strength
• Fishing from boats where conventional tackle is preferred

When you need a premium conventional rod with UFR-II technology for increased lifting strength, 24-ton carbon construction, and West Coast-specific design for yellowtail, tuna, and white seabass, the Okuma PCH Custom Conventional Rods are the choice of serious West Coast anglers.

Shipping charges may apply at checkout due to an oversized package if the rod is over 8 feet.

The United Composites RCE Elite Composite Conventional Rod is the lightest composite conventional rod United Composites has ever built — engineered for serious offshore and inshore saltwater anglers who demand sensitivity, strength, and a featherlight feel without sacrificing backbone.

Why the RCE Elite Belongs in Your Quiver

When you're working a jig at depth, fighting a tuna on the surface, or soaking bait for halibut, rod weight matters. The RCE Elite's composite blank construction delivers a noticeably lighter feel than comparable fiberglass rods while maintaining the power needed to handle fish from 12lb to 60lb+. It's the rod serious anglers reach for when they want to fish all day without arm fatigue.

Built for the Water, Not the Wall

Every RCE Elite ships standard with lightweight EVA grips, a graphite reel seat, and ALPS S-6 Stainless Steel deep-pressed ring guides that are fully braid-proof. Single black wraps with silver trim bands and metallic red and blue accents give it a clean, premium look. Three configurations let you match the rod to your exact fishing style:

• Elite Composite (C) — EVA grips, graphite reel seat, ALPS S-6 SS guides
• Elite Composite+ (C+) — Hypalon grips, ALPS CAH aluminum Centra Lock reel seat, ALPS S-6 SS guides — for anglers who want maximum durability and a premium reel seat
• Elite Composite Deckhand (CT) — High-grade cork tape grip with nylon cord inlay, bulb-style butt cap, mariner's Turk's head knot — the charter and deckhand-ready build

The Problem It Solves

Most composite rods in this class either sacrifice sensitivity for power or add unnecessary weight. The RCE Elite hits the sweet spot — light enough to feel every bite, stiff enough to drive hooks and turn fish. The wide model range (7' to 10', 12lb to 60lb+) means you're not compromising on the right tool for the job.

Edge Over the Competition

Compared to standard fiberglass conventional rods, the RCE Elite blank is significantly lighter, reducing fatigue on long trips. The ALPS S-6 guides are a step above standard stainless guides — deep-pressed ring design keeps braid from cutting into the frame. The C+ upgrade with ALPS aluminum reel seat is a feature typically found on custom rods at twice the price.

The Right Pick If…

• You're fishing tuna, wahoo, or yellowtail on long-range or day trips and want a lighter rod that still has the backbone to fight big fish
• You're a deckhand or charter angler who needs a rod that can take daily abuse — the CT Deckhand build is made for you
• You want a versatile conventional rod that covers jig fishing, surface iron, live bait, and dead bait across a wide line class range
• You're upgrading from a basic fiberglass rod and want the feel of a composite blank without going full graphite

Best Fishing Techniques

• Jig fishing — The moderate and mod-fast actions load well for iron jigs and slow-pitch style presentations
• Surface iron — The 7' models in M-C and H-C are ideal for working surface iron on yellowtail and tuna
• Live bait & dead bait — Moderate action models (MAG-C, MEGA-C) excel at bait fishing with natural presentation
• Wahoo & Del Mar fishing — The Wahoo-C and Del Mar-C models are purpose-built for high-speed trolling and heavy bait applications
• Ulua & surf — The 9' and 10' Deckhand models cover long-range casting and surf applications

Best Conditions

• Offshore: open water tuna, wahoo, and yellowtail fishing from 20–60lb line class
• Inshore: halibut, white seabass, and rockfish on 12–40lb line
• Charter and party boat: Deckhand models built for daily use in demanding environments
• Long-range trips: lightweight blank reduces fatigue over multi-day trips

Best For

• Bluefin, yellowfin, and albacore tuna
• Wahoo (high-speed trolling and bait)
• Yellowtail and white seabass
• Halibut (bait fishing)
• Ulua and surf fishing (9'–10' Deckhand models)
• Jig fishing and surface iron
• Live bait and dead bait conventional fishing

Key Features

• Lightest composite blank in the United Composites lineup
• ALPS S-6 Stainless Steel deep-pressed ring guides — fully braid-proof
• Three configurations: Standard (C), Premium+ (C+ w/ALPS aluminum reel seat), Deckhand (CT)
• Available in 7', 8', 9', and 10' lengths
• Line class range: 12lb to 60lb+
• Single-piece construction
• Single black wraps with silver trim bands and metallic red and blue accents
• EVA grips (C), Hypalon grips (C+), Cork tape with nylon cord inlay (CT Deckhand)
• Graphite reel seat (C), ALPS CAH aluminum Centra Lock reel seat (C+)

Models & Specs

Elite Composite – Conventional (C)

Elite Composite+ – w/ALPS Aluminum Reel Seat & Hypalon (C+)

Elite Composite – Deckhand (CT)

Note: Oversize shipping fees may apply for 8' and longer single-piece rods. 9' rods may be available in-store but are not always shown on the website.

Tackle Express Tips

• Match the action to your technique: Moderate action models (MAG-C, Mega-C) are ideal for live bait and slow jigs — they load smoothly and give fish time to eat. Mod-Fast and Fast models (Monster-C, Wahoo-C, Del Mar-C) are better for iron, surface, and high-speed applications where you need instant power transfer.
• Upgrade to C+ if you fish heavy: The ALPS aluminum Centra Lock reel seat on the C+ models locks your reel down with zero play — critical when you're fighting big tuna or wahoo and can't afford any slop in the connection.
• Deckhand models for charter fishing: The CT Deckhand build with cork tape grip and Turk's head knot is designed to handle daily abuse on party boats. If you're a deckhand or fish charters regularly, this is the build that holds up.

Frequently Asked Questions

What's the difference between the C, C+, and CT Deckhand configurations?
All three share the same composite blank and ALPS S-6 SS guides. The C is the standard build with EVA grips and a graphite reel seat. The C+ upgrades to Hypalon grips and an ALPS CAH aluminum Centra Lock reel seat for added durability and a more premium feel. The CT Deckhand replaces the grip with high-grade cork tape and a nylon cord inlay, finished with a bulb butt cap and mariner's Turk's head knot — built for charter and commercial use.

Are these rods available in 9' and 10' lengths?
Yes — 9' and 10' models are available in the Deckhand (CT) configuration. Note that 9' rods may be available in-store but are not always listed on the website. Contact us directly if you're looking for a specific 9' or 10' model.

What species and techniques are these rods best suited for?
The RCE Elite line covers a wide range: tuna (bluefin, yellowfin, albacore), wahoo, yellowtail, white seabass, halibut, and ulua. Techniques include jig fishing, surface iron, live bait, dead bait, and high-speed trolling. The wide model range (12lb to 60lb+) means there's an RCE Elite for nearly every saltwater conventional application.

Heavy-Duty Jigging Power for Offshore Big Game

The Phenix Megalodon Jigging Casting Rods deliver heavy-duty jigging power designed for serious offshore big game anglers. Built with Phenix's advanced blank technology and premium components, these rods provide exceptional power, sensitivity, and durability for working heavy jigs in deep water for tuna, amberjack, grouper, and other powerful offshore gamefish. The Megalodon represents Phenix's commitment to creating specialized rods for offshore jigging specialists.

Advanced Heavy-Duty Blank Technology

• Heavy-Duty Construction: Designed specifically for heavy jigging and powerful offshore gamefish
• Exceptional Power: Strong backbone provides maximum power to work heavy jigs and fight big fish
• Responsive Tip: Sensitive tip section detects strikes while maintaining power
• Advanced Materials: High-quality carbon fiber provides strength and sensitivity
• Durable Design: Built to withstand the demands of offshore jigging

Premium Components and Construction

• Heavy-Duty Guides: Premium guides handle braided line and heavy loads
• Reinforced Reel Seat: Heavy-duty reel seat provides secure connection under extreme pressure
• Comfortable Grip: Ergonomic handle design provides secure handling during extended battles
• Quality Hardware: Premium components ensure reliable performance
• Professional Construction: Quality materials and craftsmanship ensure long-term durability

Offshore Jigging Applications

The Megalodon excels in demanding offshore jigging applications. Target trophy tuna with heavy vertical jigs, work for amberjack around wrecks and reefs, pursue grouper on deep structure, fish for yellowtail and other powerful gamefish, or handle any situation requiring heavy-duty jigging power. The exceptional power and durable construction allow you to work heavy jigs effectively while maintaining the strength needed to battle powerful offshore gamefish.

Key Features

Phenix Quality and Innovation

Phenix has been creating innovative fishing rods for serious anglers, and the Megalodon Jigging Casting Rods continue this tradition with heavy-duty construction and premium components. Every component is carefully selected and tested to ensure reliable performance season after season. From weekend anglers to serious offshore specialists, the Megalodon delivers the power and durability that offshore jigging anglers demand.

Experience the heavy-duty offshore jigging performance that serious anglers trust. The Phenix Megalodon isn't just a rod—it's a precision tool built specifically for offshore jigging success.

Dominate offshore jigging with Phenix Megalodon—where heavy-duty power meets offshore performance.

The United Composites Xtreme Composite Rail Rods are an anomaly. They are a complete departure from the other blanks on the market designed for the same use. These purpose-built rods have a smaller tip, more recoil, and more lifting power than conventional rail rods.

The Xtreme Composite Rail Rod line is comprised of 10 different models in two lengths: 7'0" and 7'6". The 7'6" models have become the go-to for big tuna fishing on long-range type boats. Each model has its own preferred use and application, but they are all of the same high quality and finish standards that go into each and every UC product.

They feature Heavy Duty Fuji BHBNG black stainless guides, Alps CAH reel seats, triple wrapping, and Randy's innovative hybrid cold shrink handle. This handle combines the durability of 3M cold shrink with the comfort of hypalon in areas where an angler may be required to grab and pull for those last two feet of line!

Key Features:

• Smaller Tip Design: More recoil and lifting power than conventional rail rods
• Heavy Duty Fuji BHBNG Guides: Black stainless steel for maximum durability
• Alps CAH Reel Seats: Premium reel seat on all models
• Triple Wrapped: Extra reinforcement for big game fishing
• Hybrid Cold Shrink Handle: Randy's innovative design combining 3M cold shrink with hypalon
• Two Length Options: 7'0" and 7'6" models available
• Five Power Ratings: Raptor, Centaur, Viper, Invictus, and Gladiator
• Purpose-Built Design: Specifically for big tuna on long-range boats
• 1-Piece Construction: Maximum strength and sensitivity

Specifications Table:

All models are 1-piece rods with Fuji BHBNG guides and Alps CAH reel seats.

Construction Details:

• Guide System: Heavy Duty Fuji BHBNG black stainless steel
• Reel Seat: Alps CAH for premium performance
• Wrapping: Triple wrapped for maximum reinforcement
• Handle: Hybrid cold shrink combining 3M cold shrink with hypalon
• Blank Design: Smaller tip for more recoil and lifting power

Performance Advantages:

• More Recoil: Smaller tip design provides superior hooksets
• More Lifting Power: Purpose-built for big tuna battles
• Hybrid Handle: Grab and pull for those last two feet of line
• 7'6" Models: Go-to choice for long-range big tuna fishing
• Complete Departure: Anomaly design unlike other rail rods

Ideal Applications:

• Long-range big tuna fishing
• Cow tuna and triple-digit bluefin
• Flatfall and rail fishing techniques
• Situations requiring maximum lifting power
• Big game fishing from long-range boats
• Trophy tuna targeting

When you need a premium rail rod with smaller tip design for more recoil and lifting power, Heavy Duty Fuji BHBNG guides, triple wrapping, and hybrid cold shrink handle for big tuna on long-range boats, the United Composites RCX Xtreme Composite Rail Rods are the choice of serious long-range anglers.

Oversize shipping fee may apply! This is especially true with 8' and longer single piece rods.

All Rods are packaged with extreme care! Being fisherman ourselves we take pride in not having rods break during shipping, to ensure they'll be enjoyed and fished. We make sure every rod is wrapped tightly with bubble wrap in the crucial areas and are suspended in a thick rod tube, to keep from being crushed or banged around.

Unfortunately due to High Demand and Limited Stock, no coupon code or discounts can be applied.

The United Composites RGP GUSA Premium Conventional Rods represent the most advanced, most innovative product to have ever come from the production shop at United Composites. United Composites USA has taken West Coast saltwater fishing rods in a very different direction with this groundbreaking series.

Each premium rod incorporates the trademarked dual helix design element for incredible strength and durability, plus a flat tow woven carbon reinforcing layer that brings a level of beauty along with enhanced strength and power to an already extraordinary product. The GUSA Premium series is the first in company history dating back to the original innovation by Richard Kantner where up to four different materials are used to create the right actions at incredibly light weights.

Available in two configurations: GUSA Premium Conventional (standard) and GUSA Premium Conventional+ (upgraded with hypalon grips and ALPS CAH aluminum reel seats).

Key Features:

• Dual Helix Design: Trademarked construction for incredible strength and durability
• Flat Tow Woven Carbon Layer: Enhanced strength, power, and beauty
• Four Material Construction: First in company history to use up to four different materials
• Incredibly Light Weight: Right actions at minimal weight
• Two Configurations: Standard and Premium+ options available
• Premium+ Upgrades: Hypalon grips and ALPS CAH aluminum reel seats
• Fast Action: All models feature fast action for power and control
• Richard Kantner Heritage: Continuing the tradition of industry innovation
• 1-Piece Construction: Maximum strength and sensitivity

GUSA Premium – Conventional (Standard):

GUSA Premium – Conventional+ (Upgraded):

Upgraded with Hypalon Grips and ALPS Aluminum Centra Lock Reel Seats

All models are 1-piece rods with fast action. Premium+ models feature upgraded hypalon grips and ALPS CAH aluminum reel seats.

Construction Details:

• Blank Technology: Dual helix design with flat tow woven carbon reinforcing layer
• Material Count: Up to four different materials for optimal performance
• Action: Fast on all models
• Standard Configuration: Lightweight graphite reel seat
• Premium+ Configuration: Hypalon grips and ALPS CAH aluminum reel seats

Performance Advantages:

• Most Advanced Design: Most innovative product in UC history
• Enhanced Strength & Power: Flat tow woven carbon reinforcing layer
• Incredibly Light Weight: Four material construction for optimal weight
• Richard Kantner Legacy: Continuing the tradition of innovation
• Beautiful Finish: Flat tow woven carbon adds visual appeal

Ideal Applications:

• West Coast saltwater fishing
• Tuna, yellowtail, and white seabass fishing
• Situations requiring lightweight rods with maximum power
• Premium conventional fishing applications
• Anglers seeking the most advanced rod technology
• Trophy fish targeting requiring strength and sensitivity

When you need the most advanced, most innovative conventional rod with dual helix design, flat tow woven carbon reinforcing layer, four material construction for incredibly light weight, and Richard Kantner heritage, the United Composites RGP GUSA Premium Conventional Rods are the choice of elite West Coast anglers.

Being fisherman ourselves we take pride in not having rods break during shipping, to ensure they'll be enjoyed and fished. We make sure every rod is wrapped tightly with bubble wrap in the crucial areas and are suspended in a thick rod tube, to keep from being crushed or banged around.

The Conventional Rod the West Coast Has Been Building Toward.

Conventional saltwater fishing puts a specific set of demands on a rod blank that most production rods can't fully satisfy: enough sensitivity to read bait and feel structure, enough backbone to turn big fish from kelp and deep water, and light enough to fish all day without arm fatigue compromising your technique. The Phenix Black Diamond Conventional Rod addresses all three through aerospace-grade blank construction — Toray high-strength carbon fiber combined with a proprietary resin system and layering process that creates a blank thinner in diameter and lighter in hand than anything else in its line class, while being stronger, not weaker, than the rods it replaces.

Aerospace Blank Construction. Not a Marketing Claim.

The Black Diamond blank starts with Toray carbon fiber — the material used in aerospace and structural applications where the strength-to-weight ratio is a hard engineering requirement, not a performance aspiration. Phenix combines it with a high modulus graphite blend and their proprietary "secret sauce" resin system, layered in a unique process that stiffens the blank inter-laminarly without adding wall thickness. The result: a blank that transmits bite information from depth, loads correctly under conventional fishing loads, and generates the lifting power to pump big fish up from structure without fatiguing you in the process.

Two Hardware Tiers. One Blank Standard.

The Black Diamond Conventional lineup uses two hardware configurations depending on model. The 7' and 7'6" models use Alps reel seats and Hypalon handles — the Alps seat is a premium conventional reel seat known for its secure lock and clean aesthetic, favored by custom rod builders and serious inshore anglers. The 8' models use Fuji reel seats and X-Wrap handles — the Fuji hardware is the industry standard for performance saltwater conventional builds. Guides are Fuji Alconite, Alps S-6, or Seaguide depending on the specific model, all selected for the line class and blank behavior of that configuration. The Deck Hand variant (PSW809XH-J) ships without a reel seat for custom builds.

Why It Beats the Competition

• Toray high-strength carbon with proprietary resin layering — aerospace-grade blank; thinner diameter, lighter, stronger than comparable conventional blanks
• Two hardware tiers — Alps reel seat/Hypalon on 7' models, Fuji seat/X-Wrap on 8' models; both are premium configurations used in custom builds
• Full line class coverage — 10-30lb through 30-80lb across 11 available models; one listing covers inshore finesse through heavy offshore conventional
• Deck Hand variant available — PSW809XH-J ships blank only (no reel seat) for anglers who want to mount their own hardware
• Fast to Moderate Fast actions — responsive through the tip for conventional jigging and live bait; enough backbone throughout to drive hooksets and pump fish

The Right Pick If...

• You fish West Coast conventional — yellowtail, white seabass, tuna, calico — and want a blank built specifically for those applications
• You're running 15-60lb conventional gear and want a rod that's noticeably lighter than what you're currently fishing without giving up strength
• You want Alps or Fuji hardware on a premium blank at a price point below a fully custom build
• You want the Deck Hand blank to build your own custom conventional rod on a proven Black Diamond blank
• You need a longer 8' conventional for open-water offshore applications where casting distance and fight leverage matter more than compactness

Best Fishing Techniques

• Conventional live bait (sardine, mackerel, anchovy): The 7' ML and M models (10-40lb) load correctly for live bait pitches and provide the tip sensitivity to feel subtle takes before the fish commits
• Yo-yo and surface iron: The 7' H and XH models (20-80lb) and the 7'6" XH provide the blank stiffness to work heavy iron and drive hooksets at depth
• Open-water offshore (tuna, yellowtail): The 8' MH through XHJ models (15-60lb) are the primary offshore conventional options — fast action with Fuji hardware for extended fight conditions
• Heavy offshore and jigging: The PSW809XHJ (20-60lb) and PSW760XH (30-80lb) are the dedicated heavy offshore and jigging models where maximum blank strength is the priority
• Custom conventional builds: The PSW809XH-J Deck Hand blank allows rod builders to spec their own reel seat, handle, and guides on the Black Diamond blank

Best Conditions

• Southern California sportboat and long-range — yellowtail, white seabass, calico, tuna
• Open-water offshore — larger tuna and pelagics on 20-60lb conventional gear
• Kelp structure and inshore reef — lighter models (ML, M) for finesse conventional live bait applications
• Heavy jigging and deep-water applications — heavier models (H, XH) for sustained pressure at depth

Best For

• Target Species: Yellowtail, White Seabass, Calico Bass, Halibut, Bluefin Tuna, Yellowfin Tuna, Amberjack, Rockfish
• Techniques: Live Bait, Yo-Yo Iron, Surface Iron, Conventional Jigging, Offshore Trolling
• Angler Level: Intermediate to Advanced — the blank sensitivity and fast action reward proper conventional technique; a natural step up from mid-grade production conventional rods

Key Features

• Toray high-strength carbon + high modulus graphite with proprietary resin layering
• Thinner diameter, lighter, stronger than comparable class conventional blanks
• Fuji Alconite, Alps S-6, and Seaguide guides depending on model
• Alps reel seat / Hypalon handle (7' models) or Fuji reel seat / X-Wrap handle (8' models)
• Deck Hand variant available — blank only, no reel seat, for custom builds
• 11 available models — 7' to 8', 10-80lb line class coverage

Currently Available Models

Full Series Reference

Tackle Express Tips

• Choose your reel seat tier based on your primary application: Alps reel seat models (7' and 7'6") are optimized for inshore and near-shore conventional applications where a lighter, more balanced setup is the priority. The Fuji reel seat models (8') are built for offshore and extended fight scenarios where reel security under sustained load matters more than weight savings. Both tiers use the same Black Diamond blank — the hardware difference is about application fit, not quality level.
• The PSW809H vs PSW809H-XF decision is about hookset style: The 809H (Fast action) gives you a quicker hookset response for reaction bites on conventional gear. The 809H-XF (Moderate Fast) has a softer tip that loads more gradually — better for live bait presentations where you want the fish to fully commit before you feel the load. Both are 20-50lb Heavy models; the action is the only difference.
• Run 40-65lb braid to a heavy fluorocarbon leader on the XH models: The PSW700XH, PSW760XH, and PSW809XHJ are built for heavy applications where braid is the main line. A 15-25ft fluorocarbon top shot in 40-60lb keeps the leader out of your guides on the cast while presenting monofilament to the fish near the terminal tackle. Keep connections clean — a FG or PR knot minimizes guide friction on the cast better than a swivel-to-braid connection.

FAQ

What's the difference between the Alps reel seat models and the Fuji reel seat models?
The Alps reel seat is used on the 7' and 7'6" models — it's a premium conventional reel seat preferred by custom rod builders for its secure lock and low-profile design. The Fuji reel seat is used on the 8' models — Fuji's industry-standard hardware for performance saltwater conventionals. Both are excellent; the distinction reflects the application and rod build philosophy for each length group. The Alps models pair well with lighter to mid-weight conventional reels; the Fuji models are designed for larger conventional reels used in offshore fishing.

What is the Deck Hand variant (PSW809XH-J)?
The Deck Hand variant ships as a finished Black Diamond blank with guides installed but no reel seat fitted — it's for rod builders or anglers who want to mount their own reel seat and handle configuration. If you have a preferred conventional seat or want a custom wrap, this is the model to start with. All other components (guides, blank finish) are identical to the standard PSW809XHJ.

How does the Black Diamond Conventional compare to the Black Diamond Spinning lineup?
Same Toray carbon blank technology and proprietary resin system across both lines. The conventional versions use Alps or Fuji conventional reel seats and are built for conventional fishing applications (live bait, iron, offshore). The spinning versions use Fuji DPS spinning seats and are configured for spinning reels and casting-style fishing. Both deliver the same thin-diameter, lightweight blank performance — choose based on your reel style and technique preference.

Engineered for the West Coast. Proven on Everything That Swims There.

West coast saltwater fishing has a specific style that demands a specific kind of rod. Surface iron, yo-yo iron, live bait at the rail, kelp bed calico, near-shore yellowtail — each technique asks for a blank that loads at different weights, recovers at different speeds, and fights fish with a different leverage profile than a generalist saltwater rod can provide. The Phenix Abyss Conventional Rod is built specifically for that environment. Constructed from a Toray Graphite and S-Glass composite blank, the Abyss achieves the strength-to-weight balance that west coast anglers have been demanding for years — superior lifting power in a blank that's thinner and lighter than traditional conventional rods in its class, without the casting fatigue that heavier builds produce.

Why Toray Graphite and S-Glass Together

S-Glass (structural glass fiber) is fundamentally different from standard fiberglass in one critical way: it's stronger, not just heavier. Combined with Toray graphite's stiffness and sensitivity, the resulting composite blank gets the best of both materials — the graphite component delivers blank responsiveness and tip sensitivity, while the S-Glass provides the parabolic loading behavior and toughness that keeps the blank from catastrophic failure under the sustained load of a hard-running fish. The Abyss doesn't just feel strong; it is strong in a way that matters when you're 20 minutes into a fight with a fish that won't quit.

Three Models. One Blank Platform. Every West Coast Application.

All three Abyss PSX models share the same 8-foot blank length, differentiated by line class to match the primary west coast conventional applications: the PSX-807 (12-30lb) for lighter iron, finesse live bait, and calico applications; the PSX-808 (15-40lb) for mid-weight iron and standard yellowtail live bait; and the PSX-809 (20-50lb) for heavy surface iron, large baits, and situations where maximum lifting power and line class are the priority. All three are built for the conventional reel setup that west coast sportboat and inshore fishing demands.

Why It Beats the Competition

• Toray Graphite / S-Glass composite blank — strength-to-weight optimized; thinner diameter and lighter than conventional rods with comparable line ratings
• West coast action taper — designed specifically for surface iron and live bait; not a repurposed offshore blank
• Superior lifting power — the S-Glass component provides parabolic load behavior under sustained fish pressure; resists fatigue failure that pure graphite blanks are prone to
• Reduced casting fatigue — the lighter blank weight means you can work surface iron at full casting pace over a long day without the arm fatigue that heavier conventional rods produce
• Three line classes from one platform — 12-30lb through 20-50lb, covering the full range of west coast conventional inshore applications

The Right Pick If...

• You fish Southern California surface iron and need a conventional rod with the right action taper for west coast-style iron retrieves
• You fish live bait (sardine, mackerel, anchovy) at the rail and want a blank that loads softly on a pitch but has the backbone to turn a hard-running yellowtail
• You want a lighter conventional rod that reduces casting fatigue over a full sportboat day without sacrificing lifting power
• You target calico, yellowtail, halibut, and near-shore tuna from the same rod and need a model that bridges those applications
• You prefer conventional gear over spinning for iron work and want a blank built specifically for that style

Best Fishing Techniques

• Surface iron: The Abyss action taper is specifically designed for west coast surface iron retrieves — the blank loads on the cast and recovers quickly for a fast, consistent retrieve cadence
• Yo-yo iron: The graphite component provides the sensitivity to feel iron contact on the drop and the stiffness to drive a hookset from depth
• Live bait (sardine, mackerel, anchovy): The PSX-807 and PSX-808 load softly enough to pitch live bait without tearing the bait or alerting fish to rod pressure
• Dropper loop and deep iron: The heavier PSX-809 (20-50lb) provides the backbone for working heavier terminal rigs and lifting fish from depth on conventional gear
• Calico bass in kelp: The lighter models (PSX-807) give you the finesse to work jigs and plastics around structure while retaining enough backbone to pull fish out before they wrap

Best Conditions

• Southern California sportboat and long-range fishing — yellowtail, white seabass, calico, near-shore tuna
• Kelp paddy and inshore structure fishing — surface iron and live bait applications
• Party boat and open-party rail fishing — the lighter blank weight reduces fatigue in crowded rail conditions over a full day
• Shore and jetty conventional fishing — the 8' length provides casting reach and leverage for surf-zone presentations

Best For

• Target Species: Yellowtail, Calico Bass, White Seabass, Halibut, Barracuda, Bonito, Near-Shore Tuna
• Techniques: Surface Iron, Yo-Yo Iron, Live Bait, Dropper Loop, Conventional Jigging
• Angler Level: Intermediate to Advanced — the west coast-specific action taper rewards anglers familiar with iron retrieves and conventional rail fishing; an excellent step-up from entry-level conventional rods

Key Features

• Toray Graphite / S-Glass composite blank — strength-to-weight optimized for west coast applications
• West coast surface iron and live bait action taper
• Lighter and thinner than comparable conventional blanks — reduces casting fatigue on iron
• Superior lifting power from S-Glass parabolic load behavior
• Three models — 8', 12-50lb, covering light finesse through heavy live bait and iron applications

Models & Specs

Tackle Express Tips

• Match the line class to your primary bait and iron weight: The PSX-807 (12-30lb) is your go-to for anchovies, small sardines, and light surface iron under 3oz. The PSX-808 (15-40lb) is the most versatile all-around model for mixed sportboat fishing. Step to the PSX-809 (20-50lb) when you're running mackerel, large swimbaits, or heavy yo-yo iron where maximum backbone is the priority.
• Use 20-40lb monofilament or 30-50lb braid for iron work on conventional gear: The Abyss is built for conventional reels — a level-wind or low-profile conventional in the 300-400 size class pairs well with the 8' blank length. Monofilament gives you a casting buffer on iron retrieves; braid with a fluorocarbon top shot works well for live bait at depth where sensitivity matters.
• Work surface iron at a steady, fast retrieve pace: The Abyss action taper is specifically tuned for west coast surface iron cadence — a fast, ripping retrieve that keeps the lure in the strike zone. The blank's recovery speed is matched to that retrieve style. Slow retrieving kills the action on a surface iron; trust the taper and keep the lure moving.

FAQ

What makes the Abyss different from a standard conventional saltwater rod?
The Abyss is built specifically for west coast surface iron and live bait technique — not a general-purpose offshore blank. The action taper is tuned for iron retrieves, the S-Glass/graphite composite provides lifting power without the weight of a pure glass conventional rod, and the blank diameter is thinner than traditional heavy conventional rods at the same line class. If you fish California inshore and near-shore, the Abyss will feel more natural in hand than a generic offshore conventional.

Can I use the Abyss for tuna?
Yes — the PSX-808 and PSX-809 are appropriate for near-shore and inshore tuna (schoolie bluefin, yellowfin under 40lb) on conventional gear. For long-range or open-water tuna on heavier tackle, a dedicated offshore conventional in a heavier line class is the better tool. The Abyss is optimized for the 12-50lb conventional applications most common on SoCal sportboats.

What reel pairs best with the Abyss PSX models?
A conventional level-wind or low-profile conventional in the 300-400 size class (Shimano Tranx, Daiwa Lexa, similar) pairs well with the 8' blank and the 12-40lb line ratings. For the PSX-809 (20-50lb), step to a larger conventional (Shimano Calcutta 400, Avet MXL, similar) that can hold adequate yardage of heavier line for extended fights.

United Composites GUSA Graphite Conventional Rods are in a league of their own. Each blank is made up of 100% Multi-Modulus Carbon Construction and utilizing the Dual Carbon Helix Core. They represent the highest quality and construction in our product line. Unlike nearly all of its competitors, these blanks are made of 100% Carbon Graphite. There is no fiberglass in the construction at all.

The rods are fitted with hypalon grips, ALPS aluminum reel seats, and aluminum gimbals as well as 316 Stainless Steel frame ALPS guides. Each rod is wrapped with a metallic blue base wrap and a black top wrap with silver and red detail.

All Rods are packaged with extreme care!

We have a 99% no-breakage delivery rate.

Being fisherman ourselves we take pride in not having rods break during shipping, to ensure they'll be enjoyed and fished. We make sure every rod is wrapped tightly with bubble wrap in the crucial areas and are suspended in a thick rod tube, to keep from being crushed or banged around.

GUSA Graphite Conventional – Hypalon

The Inshore Casting Rod That Does Everything.

Inshore saltwater fishing doesn't ask for a specialist. It asks for a rod that can flip iron into a kelp paddy, pitch live bait under a dock, pull a stubborn calico out of thick cover, and still have enough reach for a shore cast into moving current. The Phenix M1 Inshore Casting Rod is built for exactly that range of demands. Nano tube blank technology delivers increased sensitivity and lifting power in a lightweight, dynamically balanced package. The extended foregrip — developed directly from customer feedback — gives inshore anglers the two-handed leverage they need when a fish runs for structure. Three active models cover 7'11" to 7'9", Medium Light through Heavy.

What Nano Tube Technology Delivers

Nano tube construction modifies the blank at a molecular level — the resin system incorporates nano-scale particles that increase the inter-laminar bond strength between carbon fiber layers. In practical terms, the blank is stiffer per unit weight and transmits vibration more efficiently than standard graphite construction. You feel the iron tick off kelp. You feel the subtle hesitation of a calico picking up a jig before it commits. And when the fish runs, the lifting power the nano tube blank generates means you turn it faster than the rod's weight class suggests you should.

Built for Kelp, Structure, and Open Water

The M1 Inshore SMX lineup uses Fuji O-ring guides — the ring-in-ring design reduces friction on the cast and handles heavy braid loads cleanly — paired with a custom high-density EVA split grip handle and Phenix's own split reel seat. The extended foregrip is the detail that separates the M1 from standard casting rods: it gives you a second grip point when you're pumping a fish out of structure or managing a long fight at the rail. The 7'9" Heavy (SMX-79H) features a full grip for anglers who prefer the added contact surface on heavier applications.

Why It Beats the Competition

• Nano tube blank technology — increased sensitivity and lifting power per unit weight; stiffer inter-laminar bond than standard graphite construction
• Extended foregrip — customer-requested addition; gives you two-handed leverage on fish that want to go back into structure
• Fuji O-ring guides — ring-in-ring design reduces friction and handles braid loads at saltwater line classes
• Custom high-density EVA split grip + Phenix split reel seat — lightweight and secure; designed for all-day inshore use
• Broad model lineup — 7'3" to 9'0" in the full series, covering everything from medium-weight calico applications to heavy shore fishing

The Right Pick If...

• You fish Southern California inshore — calico bass, yellowtail, white seabass — and need a casting rod that handles both kelp structure and open water
• You want the extended foregrip for two-handed leverage on heavy fish or long fights
• You fish iron, live bait, and soft plastics from the same rod and need a blank that loads properly across that range
• You want a lightweight rod with genuine lifting power — not a heavy-duty stick that fatigues you over a long day
• You need a 7'11" casting rod for longer presentations on structure or pelagic bait fishing

Best Fishing Techniques

• Iron jigging (yo-yo and surface iron): The SMX-711MH (Extra Fast, 15-35lb, 2-6oz) is the primary iron model; the extra-fast action drives hooksets and controls iron on the drop
• Live bait (sardine, mackerel, anchovy): The SMX-711ML (Fast, 10-25lb, 1-3oz) loads more softly for live bait pitches; the moderate tip keeps bait alive and reduces premature drops
• Heavy iron and large lures: The SMX-79H (Extra Fast, 20-45lb, 3-8oz, Full Grip) is the dedicated power model for heavy jigs, large swimbaits, and situations where maximum leverage is the priority
• Kelp structure and cover fishing: The extra-fast action models recover quickly after loading — important for turning fish that immediately run back into kelp after the bite
• Shore and jetty casting: The full model lineup's 8'2" and 9'0" models provide the reach needed for long shore presentations (see full spec table)

Best Conditions

• Southern California kelp beds — calico bass, yellowtail, white seabass in and around structure
• Inshore rocky reef and point fishing — mid-weight iron and live bait applications
• Sportboat and party boat fishing — the extended foregrip handles the rail pressure and rod pump leverage demands of crowded conditions
• Shore, jetty, and pier fishing — longer models provide the distance and power for surf-zone and jetty presentations

Best For

• Target Species: Calico Bass, Yellowtail, White Seabass, Halibut, Barracuda, Bonito, Rockfish
• Techniques: Iron Jigging, Live Bait, Soft Plastics, Surface Iron, Shore Casting
• Angler Level: Intermediate to Advanced — the nano tube sensitivity rewards anglers who read blank feedback; the extended foregrip is appreciated most by anglers with experience fighting fish in structure

Key Features

• Nano tube blank technology — increased sensitivity and lifting power in a lightweight build
• Extended foregrip — customer-driven design for two-handed leverage on inshore fish
• Fuji O-ring guides — reduced friction, heavy braid compatible
• Custom high-density EVA split grip handle — lightweight, comfortable for all-day use
• Phenix split reel seat — secure, lightweight, inshore-optimized

Currently Available Models

Full Series Reference

Tackle Express Tips

• Use the extended foregrip when fighting fish in kelp: The extra grip point lets you apply consistent downward rod pressure while keeping your casting hand on the reel handle — the two-handed pump is more efficient than trying to muscle a fish with one hand on a conventional grip. This is the detail that separates the M1 from standard casting rods in structure fishing situations.
• Match the action to your primary lure weight: The Fast-action ML models (SMX-711ML) are built for 1-3oz — they load correctly at those weights and give you the softer tip for live bait presentations. The Extra Fast MH models are built for 2-6oz iron and hard presentations where a quick hookset is more important than tip softness. Running 4oz iron on an ML model or 1oz live bait on an MH model costs you performance on both ends.
• Run 30-50lb braid to a 20-30lb fluorocarbon leader for iron work: The Fuji O-ring guides handle the braid-to-leader connection cleanly. A 10-12ft leader keeps the connection out of your guides on the cast while presenting fluorocarbon to the fish near the lure. For live bait, shorten the leader and lighten the class to match your bait size.

FAQ

What's the difference between the SMX-711ML and SMX-711MH?
Same length (7'11"), different power and action. The ML (Fast action, 10-25lb, 1-3oz) is built for lighter iron, live bait, and soft plastics — the softer tip loads on lighter presentations and forgives subtle takes. The MH (Extra Fast, 15-35lb, 2-6oz) is stiffer through the tip for heavy iron, swimbaits, and applications where you need an immediate hookset on reaction strikes. Most inshore anglers who fish both techniques keep both in rotation.

Why does the SMX-79H have a full grip instead of a split grip?
The 79H (Heavy, 20-45lb, 3-8oz) is the power model — it's built for heavy iron loads, larger fish, and situations where maximum leverage matters. A full grip gives you more surface area for two-handed pressure, which is important at that line class and lure weight. The lighter models use split grip for sensitivity and reduced overall weight.

Can I use the M1 Inshore rods for yellowtail or pelagics offshore?
Yes — the M1 Inshore lineup transitions well to near-shore pelagic applications. The SMX-711MH and SMX-79H are the appropriate models for yellowtail on iron (15-45lb). For open-water offshore tuna applications, a dedicated offshore spinning or conventional rod is the better tool; the M1 is optimized for inshore and near-shore structure fishing rather than deep-water or long-range pelagic work.

The United Composites Swimbait Finatic Rod lineup is built upon a select number of UC DHX Blanks. The blanks incorporate the Dual Carbon Helix core as well as a layup of multi-modulus layers construction, providing unmatched strength and sensitivity for throwing big baits.

All Swimbait Finatic rods are equipped with Fuji guides and reel seats along with lightweight EVA grips arranged as a split-grip design. They are attractively single wrapped in black with green and brown metallic detail. Built for the rigors of the ocean but designed for the finesse of the freshwater, these rods excel in both saltwater and freshwater swimbait applications.

Key Features:

• DHX Blank Technology: Dual Carbon Helix core with multi-modulus layered construction
• Fuji Components: Premium Fuji guides and reel seats on all models
• Split-Grip Design: Lightweight EVA grips for reduced weight and improved balance
• Attractive Finish: Single wrapped in black with green and brown metallic detail
• Versatile Applications: Built for ocean rigors, designed for freshwater finesse
• 7'11" Length: Optimal length for swimbait fishing (most models)
• Multiple Power Options: L, M, MH, H, and XH ratings available
• 1-Piece Construction: Maximum strength and sensitivity

Finished Rod Specifications:

All models are 1-piece rods with Fuji guides and reel seats.

Construction Details:

• Blank Technology: DHX Series with Dual Carbon Helix core
• Layup: Multi-modulus layers for optimal strength-to-weight ratio
• Guide System: Fuji guides on all models
• Reel Seat: Fuji reel seats for premium performance
• Grip Design: Split-grip EVA for reduced weight
• Finish: Black with green and brown metallic detail

Performance Advantages:

• Dual Carbon Helix Core: Maximum strength without added weight
• Multi-Modulus Construction: Optimized for big bait applications
• Graphite USA Heritage: Born from the same technology and materials
• Ocean-Tough, Freshwater-Finesse: Versatile for both environments
• Split-Grip Design: Improved balance and reduced fatigue

Ideal Applications:

• Freshwater swimbait fishing for bass and pike
• Saltwater swimbait applications for calico bass and halibut
• Throwing big baits in both fresh and saltwater
• Situations requiring strength and finesse
• Frog fishing with the RUS76 XH Frogger model
• Trophy fish targeting with large swimbaits

When you need a premium swimbait rod with Dual Carbon Helix core, multi-modulus construction, Fuji components, and versatility for both freshwater and saltwater big bait applications, the United Composites Swimbait Finatic Rods are the choice of serious swimbait anglers.

Oversize shipping fee may apply! Especially with 8' and longer single piece rods.

All Rods are packaged with extreme care! Being fisherman ourselves we take pride in not having rods break during shipping, to ensure they'll be enjoyed and fished. We make sure every rod is wrapped tightly with bubble wrap in the crucial areas and are suspended in a thick rod tube, to keep from being crushed or banged around.

The Phenix Black Diamond Hybrid is built on a blank that doesn't exist anywhere else in saltwater fishing. It's the first fully woven carbon fiber and Kevlar hybrid blank — a material combination borrowed from aerospace and automotive engineering and applied to a fishing rod after years of R&D. The result is a rod that is lighter, stronger, and more sensitive than traditional glass or graphite, with an action profile that handles everything from 15 lb live bait work to 200 lb stand-up applications depending on the model.

Why Graphite and Glass Both Fall Short

Graphite is light and sensitive but brittle under high lateral loads. Fiberglass is tough but heavy and slow. The Phenix Hybrid blank doesn't make that tradeoff — the woven carbon fiber/Kevlar construction distributes stress across the blank's entire surface rather than concentrating it at failure points. That means you get graphite-level sensitivity and weight with far better impact resistance, and an action that loads and recovers faster than any equivalent glass blank.

What's Built Into Every Black Diamond Hybrid

• Fully woven carbon fiber and Kevlar blank — aerospace/automotive composite technology applied to saltwater rod design
• Fast action across all models — loads quickly and transfers energy efficiently on the hookset
• Fuji Silicon Carbide (SIC) or HBSG guides — depending on model; low-friction, heat-resistant, long-lasting
• Alps Centra Lock or Fuji reel seats — solid lockdown for conventional reels under heavy drag
• Hypalon or high-density Hypalon handles — comfortable, non-slip grip in wet conditions
• Deckhand variants available — custom seine cord or woven wrap handle for charter and commercial applications
• Extreme care packaging — bubble-wrapped at critical areas and suspended in a thick rod tube

The Right Pick If...

• You want a blank that outlasts graphite in high-impact, high-drag applications without the weight penalty of glass
• You're fishing conventional gear for yellowtail, tuna, or big game and need a rod that won't telegraph its limits mid-fight
• You need a single-blank platform that covers 15 lb light live bait through 200 lb stand-up — the Black Diamond lineup has a model for each application
• You're a deckhand or charter angler who needs a rod that takes abuse over hundreds of trips without cracking or delaminating

Best Fishing Techniques

• Live bait (sardines, mackerel, squid, flylined)
• Iron casting / metal jigs
• Stand-up conventional fishing
• Trolling (with Aftco guide variants)
• Marlin casting (PMC Marlin Caster models)

Best Conditions

• Offshore bluewater and island fishing
• Kelp paddy and drift fishing
• High-drag, big-game applications
• Charter and long-range environments requiring durable, repeatable performance

Best For

• Yellowtail, white seabass, and bluefin tuna
• Wahoo, mahi-mahi, and offshore pelagics
• Marlin and billfish on casting models
• Anglers who want a premium US-designed rod built to last

Key Features

• Woven carbon fiber + Kevlar blank — first of its kind in saltwater rods
• Fuji SIC / HBSG / MNSG guides depending on model
• Alps Centra Lock or Fuji reel seats
• Hypalon or high-density Hypalon handles
• Deckhand variants with seine cord or woven wrap
• Full range from 6'6" 15-40 lb to 9'2" 25-60 lb and 7' 80-200 lb stand-up

Models & Specs (Stocked Variants)

Additional models available including Deckhand, Trolling, and Marlin Caster variants — contact us for availability.

Tackle Express Tips

• For Southern California live bait fishing targeting yellowtail and bluefin on 30–60 lb fluorocarbon, the PHD-700H (20-60 lb) and PHD-760H (20-60 lb, 7'6") are the most versatile models in the lineup — long enough to cast, stout enough to pressure fish.
• The Deckhand variants (seine cord or woven wrap handles) are worth considering even for private boat use. They're built to take daily abuse and the handle texture gives you more control on the rod when fighting fish one-handed.
• Match your reel to the rod power class: the MH models (15-40 lb) pair well with 400–500 size reels, the XH and X2H range (30-100 lb) with 600–800 size lever drags, and the X3H/X4H with 2-speed lever drags in the 30–130 lb class.

FAQ

What makes the Hybrid blank different from standard graphite?
The Black Diamond Hybrid uses a woven carbon fiber and Kevlar construction — not a standard unidirectional or scrim-wrapped graphite blank. This gives it significantly better impact and lateral load resistance than comparable graphite rods without the weight penalty of fiberglass. It's a material technology borrowed from aerospace, not a marketing term.

How do I choose between the 7' and 7'6" models in the same power class?
The 7'6" gives you more casting leverage and a softer tip section at the same power rating — better for flylined baits where you want the fish to feel less resistance on the pick-up. The 7' is stiffer tip-to-tip for the same rating, which translates to a faster, more authoritative hookset on iron or heavier jigs.

Are the rods shipped safely for longer distances?
Yes — every Black Diamond Hybrid ships wrapped tightly with bubble wrap at the critical stress points and suspended in a heavy-wall rod tube. We've specifically invested in packaging that keeps rods intact in transit, because we're anglers and we know what a broken rod on arrival feels like.

The United Composites Platinum Composite Conventional Rods are made up of traditional Southern California styles and actions. These rods are all equipped with Fuji stainless steel guides, hypalon grips, and ALPS aluminum reel seats. The models range from a light action 12lb 7' rod to a 50lb 8' rod.

The RCP series is the penultimate power fishing rod. With fast action power wall blank designs, they offer the angler unstoppable lifting power and control over the fish. The Platinum Composite series of rods will threaten to take the top spots in your rod collection. Dare to try one and you may just hook yourself!

Key Features:

• Traditional SoCal Design: Southern California styles and actions
• Fuji Stainless Steel Guides: Premium guide system on all models
• Hypalon Grips: Durable, comfortable grip material
• ALPS Aluminum Reel Seats: Premium reel seats for secure mounting
• Fast Action Power Wall Blanks: Unstoppable lifting power and control
• 8 Model Options: ML to XH power ratings in 7'0" length
• 1-Piece Construction: Maximum strength and sensitivity
• Penultimate Power Fishing: Designed for serious anglers

Specifications Table:

All models are 1-piece 7'0" rods with Fuji stainless steel guides and ALPS aluminum reel seats.

Construction Details:

• Blank Design: Fast action power wall construction
• Guide System: Fuji stainless steel on all models
• Reel Seat: ALPS aluminum for premium performance
• Grip Material: Hypalon for durability and comfort
• Rod Length: 7'0" on all models

Performance Advantages:

• Unstoppable Lifting Power: Power wall blank design
• Superior Control: Fast action for precise fish fighting
• Traditional SoCal Actions: Proven Southern California designs
• Versatile Lineup: 8 models from 12lb to 100lb line ratings
• Top-Spot Quality: Will threaten to take the top spots in your collection

Ideal Applications:

• Southern California saltwater fishing
• Power fishing for tuna and other pelagics
• Jigging applications requiring lifting power
• Situations requiring unstoppable control over fish
• Traditional SoCal fishing techniques
• Versatile conventional fishing from light to heavy

When you need a premium conventional rod with traditional Southern California design, fast action power wall blanks for unstoppable lifting power, Fuji stainless steel guides, and hypalon grips, the United Composites Platinum Composite Conventional Rods are the choice of serious SoCal anglers.

All Rods are packaged with extreme care. We have a 99% no damage shipping record.

Being fisherman ourselves we take pride in not having rods break during shipping, to ensure they'll be enjoyed and fished. We make sure every rod is wrapped tightly with bubble wrap in the crucial areas and are suspended in a thick rod tube, to keep from being crushed or banged around.

Unfortunately due to high demand and limited stock, no coupon code, discounts, or sale can be applied.

Oversize shipping fee may apply! Especially with 8' and longer single piece rods.

Purpose-Built for West Coast Inshore Saltwater

The Shimano Teramar West Coast Inshore Casting Rods are purpose-built for the unique demands of West Coast inshore saltwater fishing. Designed specifically for targeting California halibut, calico bass, white seabass, and other hard-fighting inshore gamefish, these casting rods deliver the power, sensitivity, and durability needed for everything from working swimbaits to throwing surface irons. The Teramar West Coast represents Shimano's commitment to creating specialized tools for West Coast inshore anglers.

Advanced Blank Technology

• TC4 Construction: High-modulus carbon fiber blank provides exceptional strength-to-weight ratio for powerful hooksets and fish-fighting capability
• Spiral-X Core Technology: Multi-directional carbon fiber construction eliminates blank twist and increases power transmission for better control
• Hi-Power X: Additional layer of carbon tape reinforcement prevents blank ovalization under load for maximum power and responsiveness
• Tapered Blank Design: Progressive taper optimized for West Coast inshore techniques provides ideal balance of power and sensitivity
• Lightweight Construction: Reduced weight minimizes fatigue during long days of casting

Premium Components and Construction

• Fuji Alconite Guides: Lightweight, corrosion-resistant guides with smooth inserts reduce friction and improve casting distance
• Fuji Reel Seat: Durable, corrosion-resistant reel seat provides secure reel mounting in saltwater conditions
• EVA Grips: Comfortable, non-slip EVA foam grips provide secure handling even when wet
• Saltwater-Resistant Hardware: All components selected for maximum corrosion resistance in harsh saltwater environments
• Quality Construction: Precision manufacturing ensures consistent performance and long-term durability

West Coast Inshore Applications

The Teramar West Coast Inshore excels across the full range of West Coast inshore techniques. Work swimbaits for California halibut in the surf and bays, throw surface irons for calico bass around kelp, cast live bait for white seabass, fish soft plastics around structure, or target any inshore species from San Diego to the Bay Area. The specialized design handles the unique demands of West Coast inshore fishing with precision and power.

Multiple Models for Specific Applications

Available in multiple lengths and power ratings to match your specific West Coast inshore fishing applications. From medium-power models for finesse presentations to heavy-power rods for big swimbaits and trophy fish, each model is optimized for specific techniques while maintaining the premium performance that defines the Teramar West Coast series.

Key Features

Shimano Quality and Innovation

Shimano has been the global leader in fishing tackle innovation for decades, and the Teramar West Coast continues this proud tradition with technologies specifically designed for West Coast inshore saltwater fishing. Every component is engineered to exacting standards and tested under real-world conditions from Southern California to Northern California to ensure reliable performance season after season. From weekend anglers to serious inshore specialists, the Teramar West Coast delivers the precision and durability that West Coast anglers demand.

Experience the purpose-built performance that West Coast inshore specialists trust. The Shimano Teramar West Coast Inshore Casting Rods aren't just fishing rods—they're precision tools designed specifically for California inshore gamefish.

Dominate West Coast inshore waters with Shimano Teramar—where specialized design meets saltwater performance.

Designed specifically for West Coast anglers, the Shimano Teramar XX West Coast (WC) series of rods provides increased casting distance of heavy jigs and extra lifting power to conquer even the strongest of game fish. Teramar XX WC blanks incorporate Shimano’s patented Spiral X and Hi-Power X technologies to reduce blank twist and transfer energy efficiently through the rod during a cast and while fighting fish to achieve unprecedented overall casting distance, lifting power and sensitivity. The Teramar XX WC rods are available in deckhand configuration as well as standard configuration models with Fuji Reel Seat to meet angler preferences. Built to be the ultimate West Coast rod for heavy jigs or bait, the new Teramar XX WC is ready for long casts and grueling fights.

• EVA Handles
• Fuji K-Frame FazLite Guides

Oversize shipping fee may apply!  Especially with 8' and longer single piece rods.

All Rods are packaged with extreme care!

Being fisherman ourselves we take pride in not having rods break during shipping, to ensure they'll be enjoyed and fished. We make sure every rod is wrapped tightly with bubble wrap in the crucial areas and are suspended in a thick rod tube, to keep from being crushed or banged around.

The Ahi Assault Sabiki Sticks take the headache out of fishing and storing your sabiki rigs. Designed with only one line feeder guide and an open ended rodtip, Sabiki Bait Rigs can be threaded into the rod blank eliminating tangled rigs and dangerously exposed hooks.

When not in use, reel the entire Sabiki Rig into the blank for tangle-less storage. Easy to transport 3 piece design. 8 Foot model holds 6 hook Sabiki Rigs.

Specialized Performance for Kite Fishing Excellence

The Shimano Tallus Kite Rod is purpose-engineered for the specialized technique of kite fishing, delivering the precise taper, exceptional sensitivity, and controlled power needed to present live baits with deadly effectiveness and battle trophy-class gamefish. Built with Shimano's advanced Spiral X and Hi-Power X blank technology, this specialized rod provides the perfect balance of responsiveness and backbone required to manage kites, control live baits, and fight hard-charging pelagics with confidence.

Advanced Blank Construction

• Spiral X Core Technology: Multi-directional carbon fiber layering eliminates blank twist and maximizes sensitivity for detecting subtle bites while maintaining the power to handle trophy fish
• Hi-Power X Reinforcement: Additional X-wrap carbon tape in critical stress zones prevents blank deformation under extreme loads and increases lifting power
• TC4 Carbon Construction: High-modulus graphite delivers the perfect balance of strength, sensitivity, and weight reduction for all-day kite fishing
• Specialized Taper Design: Progressive action provides the tip sensitivity to detect light bites while maintaining the backbone to set hooks and control powerful runs

Premium Components for Kite Fishing

• Fuji Alconite Guides: Corrosion-resistant frames with smooth, durable inserts reduce friction and handle the unique angles and stresses of kite fishing
• Heavy-Duty Reel Seat: Reinforced construction with cushioned hoods provides secure reel mounting under maximum load conditions
• Premium Cork Grips: High-density cork handle provides superior grip control and comfort during extended kite fishing sessions
• Reinforced Guide Train: Strategically positioned guides distribute stress evenly and maintain optimal line flow for kite presentations

Built for Kite Fishing Mastery

Whether you're flying kites for sailfish in South Florida, targeting giant kingfish in the Gulf, pursuing wahoo and tuna offshore, or working live baits for trophy dolphin, the Tallus Kite Rod delivers the specialized performance kite fishing demands. The responsive blank provides instant feedback when fish approach your baits, while the powerful mid-section and butt deliver the leverage to drive hooks home and control the fight when big fish make their runs.

Kite Fishing Advantages

The Tallus Kite Rod is specifically optimized for the unique demands of kite fishing: the sensitivity to detect light takes on live baits suspended at the surface, the backbone to set hooks on hard-mouthed pelagics, the power to control fish while managing kite lines, and the durability to handle the constant tension and unique angles that define kite fishing. The balanced design reduces fatigue during long days on the water, letting you stay focused and ready when trophy fish appear in the spread.

Why Kite Fishing Specialists Choose Tallus

Professional captains and serious kite fishing enthusiasts trust the Tallus Kite Rod because it excels at the specialized demands of this technique. The advanced blank technology provides the perfect combination of sensitivity and power—responsive enough to detect subtle bites on nervous baits, yet strong enough to handle trophy-class sailfish, kingfish, and tuna with authority. Every component is selected for durability and performance in harsh saltwater environments, ensuring this rod delivers season after season of reliable performance.

Experience the precision and power that defines kite fishing at its finest. The Shimano Tallus Kite Rod isn't just a fishing rod—it's a specialized tool designed to help you master one of offshore fishing's most effective and exciting techniques.

Master kite fishing with the Shimano Tallus Kite Rod—where specialized design meets tournament performance.