Tuna Reels

Penn Fathom II 2-Speed Lever Drag Reels give offshore anglers the speed to find line and the low-gear control to finish a hard fight. With the current range covering 25 through 80 sizes, this conventional lever-drag platform is built for serious saltwater work, from nearshore targets to heavy offshore applications.

Speed When You Need It, Power When It Counts

The Quick Shift II 2-speed system lets you change gears when the fight changes. Use high gear to pick up line quickly, then shift down when a tuna, yellowtail, or other powerful saltwater fish digs deep. Pull-to-Turn preset drag adjustment helps keep your chosen setting consistent while you work.

What This Reel Solves Offshore

Heavy tackle can feel bulky, while a single-speed reel forces a compromise between fast retrieve and winching power. The Fathom II combines both priorities in one rigid, full-metal conventional reel, with line-capacity rings for a quick read and a double-dog ratchet anti-reverse for dependable engagement.

Best For

• Offshore trolling for tuna and yellowtail
• Nearshore and offshore live-bait or bait fishing
• Heavy conventional setups where gear changes matter
• Long runs, deep fights, and situations that demand line pickup plus cranking control
• Right- and left-hand retrieve needs across the current 25–80 size range

Key Features

• Quick Shift II 2-speed system
• Full-metal body and sideplate construction
• One-piece frame with palm sideplate for rigidity and reduced weight
• Pull-to-Turn preset drag adjustment
• Dura-Drag washers for smooth, consistent pressure
• Stainless steel main and pinion gears
• Five shielded stainless steel ball bearings
• Double-dog ratchet anti-reverse
• Line-capacity rings for quick visual reference
• Removable top spacer bar and lugs on 60 and 80 sizes only
• Some models do not include rod clamps

Models & Specs

These are the current selectable variants. Use the exact model code when comparing capacity, retrieve direction, and drag range.

Mono capacity highlights: The 25NLD2 and 25NLD2LH list 330/20, 300/25, or 245/30. The 30LD2 and 30LD2LH list 405/25, 330/30, or 255/40. The 40NLD2 models list 410/30, 315/40, or 235/50, while the 60NLD2 and 80LD2 extend into heavier line classes.

Choose the Right Current Model

Choose the 25NLD2 or 25NLD2LH for a compact heavy-duty option with right- or left-hand retrieve. Move to the 30LD2 or 30LD2LH for more line capacity while keeping the same 33-pound maximum drag. Choose the 40NLD2 or 40NLD2LH when 40 pounds of maximum drag and a faster high gear fit the plan. Step up to the 60NLD2 or 80LD2 when capacity, heavier line, and low-gear control take priority.

Complete the Offshore Setup

Pair this reel with Phenix Black Diamond Conventional Rods for a purpose-built conventional outfit. If you want a similar Penn platform without the two-speed system, compare the Penn Fathom II Single Speed Lever Drag Reels. For a different retrieve style, see the Penn Fathom II Star Drag Reels.

Tackle Express Tips

• Set the preset drag before the bite, then use the lever for controlled adjustments rather than making large changes mid-fight.
• Use high gear to pick up slack and low gear when the fish turns heavy or the fight moves deep.
• Match line class and capacity to the target, and verify handle direction before adding the reel to your rig.

Frequently Asked Questions

What is the benefit of the 2-speed system?
It lets you switch between a faster retrieve for line pickup and a lower gear for added cranking control during a heavy fight.

Which current sizes are available?
The selectable variants on this listing are 25NLD2, 25NLD2LH, 30LD2, 30LD2LH, 40NLD2, 40NLD2LH, 60NLD2, and 80LD2.

Do all models include a rod clamp?
No. The product specifications note that some models do not include rod clamps, so check the exact model before ordering.

Shimano SpeedMaster II 2-Speed Lever Drag Reels give offshore anglers a practical way to switch from fast line pickup to low-gear cranking power. With an all-metal body, carbon drag, four bearings, and two-speed gearing, this family is built for deep-water bottom fishing, light trolling, and yellowtail or tuna trips where pressure and control matter.

Choose from six listed sizes: 8 II, 10 II, 12 II, 16 II, 20 II, and 25 II. The smaller sizes keep a lighter profile for nearshore work, while the larger models add line capacity and higher maximum drag for deeper water and bigger fish. Confirmed technical rows for SPM12II through SPM25II are shown below; the 8 II and 10 II variants are available, but corresponding technical values were not included in the supplied specification data.

Why Two Speeds Earn Their Keep

Use the high gear when you need quick line pickup, then shift into low gear when a fish gets deep and every turn of the handle needs more leverage. The lever drag gives you a repeatable way to manage pressure during the fight. The trade-off is extra weight and a more involved reel than a single-speed model, but that added control pays off when deep-water cranking power matters.

Built for the Work Offshore Demands

Models & Confirmed Specifications

The values below are listed by model, not price, so you can compare the reel to your line plan and target species.

Monofilament Line Capacity

Capacities are shown as pounds/yards.

PowerPro Braid Line Capacity

Capacities are shown as pounds/yards.

The Right Pick If...

• You want one conventional reel family for deep-water bottom fishing and light trolling.
• You want low-gear leverage for bigger fish without giving up fast pickup in high gear.
• You are comparing yellowtail and tuna setups and need to match reel size to line capacity.
• You prefer a rigid metal-bodied reel with lever-drag control over a lighter single-speed design.

Best Techniques & Conditions

The SpeedMaster II is a strong fit for nearshore and offshore trips, especially deep-water bottom fishing and light trolling. Use high gear when you need to recover line quickly, and shift to low gear when depth, current, or a hard-running fish makes each crank count. For yellowtail or tuna, compare the capacity tables with your planned mono or PowerPro braid before choosing a size.

Tackle Express Tips

• Plan the spool first: Start with the line capacity table, then choose the smallest model that gives you the reserve you need.
• Use the gears with purpose: High gear is for pickup; low gear is for controlled pressure and deep-water cranking.
• Match the rod: Pair the reel with a conventional rod rated for your line class and technique rather than choosing by reel size alone.

Frequently Asked Questions

Is the Shimano SpeedMaster II a two-speed reel?

Yes. The family uses high and low gear ratios, with the exact ratios varying by model. SPM12II and SPM16II are listed at 5.7:1 / 3.1:1, while SPM20II and SPM25II are listed at 5.2:1 / 2.3:1.

Which SpeedMaster II size should I choose?

Choose based on your target line plan, depth, and fish size. The SPM12II and SPM16II are lighter and list 40 pounds of maximum drag, while the SPM20II and SPM25II provide more listed capacity and 44 pounds of maximum drag.

What line can I spool on these reels?

The confirmed tables above include both monofilament and PowerPro braid capacities for SPM12II, SPM16II, SPM20II, and SPM25II. The 8 II and 10 II variants are available, but their corresponding line-capacity values were not included in the supplied specifications.

Complete the Setup

For a bait-fishing setup, pair your reel with Shimano Teramar West Coast Inshore Casting Rods. For vertical jigging, compare it with Shimano Grappler Type J Conventional Jigging Rods. You can also compare the full Shimano Conventional Reels collection or read the complete Shimano Conventional Reels Buyer's Guide.

Shimano Trinidad A Star Drag Reels are built for anglers who want long casts, a compact frame, and confident control in serious saltwater. The Trinidad A combines Shimano's MagnumLite spool, HEG gearing, X-Ship support, Dartainium II drag, and corrosion-conscious construction for surface iron, live bait, heavy jigs, and offshore work.

Choose from the 12A, 14A, 16A, and 20A sizes. This is the reel you reach for when casting distance matters, the current is moving, and the next fish may be a yellowtail, tuna, white seabass, halibut, rockfish, or lingcod.

When Casting Distance Is the Whole Game

The Trinidad A is designed around a lighter, more compact profile and a free-running spool, so surface iron and live bait can travel without making the outfit feel bulky. The trade-off is that this is a specialized star-drag casting reel rather than a two-speed lever-drag workhorse. Choose it when effortless casting, direct power, and a refined retrieve matter more than low-gear cranking.

Key Features That Matter on the Water

Models & SKUs

Use the variant selector to choose your Trinidad A size. The model and SKU mapping is shown here for quick reference.

Best For

• Yellowtail and tuna with surface iron or heavy jigs.
• White seabass with live squid and anchovies.
• Halibut on live bait and large swimbaits.
• Rockfish and lingcod on heavy iron and jigs.
• Offshore, long-range, and general Southern California saltwater fishing.

Best Techniques & Conditions

Use the Trinidad A for cast-first saltwater fishing around kelp paddies, reefs, open-water structure, and party-boat or long-range conditions. It is especially well suited to surface-iron casting, live-bait work, and heavy-jig presentations where freespool and retrieve efficiency help you stay in the zone.

Tackle Express Tips

• Keep the spool moving cleanly: Rinse the reel with fresh water after saltwater use and follow the manufacturer's care guidance.
• Match the model to the trip: Choose size by your line plan, target species, and required capacity rather than casting distance alone.
• Set up for the presentation: Pair the reel with a rod and line class suited to surface iron, live bait, or heavy jigs.

Frequently Asked Questions

Is the Shimano Trinidad A a star-drag reel?

Yes. The Trinidad A is a conventional star-drag casting reel designed for smooth pressure control and long-casting saltwater presentations.

What can I fish with a Trinidad A?

The current lineup is suited to yellowtail, tuna, white seabass, halibut, rockfish, and lingcod applications, from live bait and surface iron to heavy jigs.

How do the Trinidad A sizes differ?

The available size options are 12A, 14A, 16A, and 20A. Use your planned line, target species, and fishing depth to choose the appropriate size.

Compare Shimano Conventional Options

For a different star-drag profile, compare the Shimano Torium A Star Drag Reel. For dedicated high-speed jigging, see the Shimano Torium A 2000HG Jigging Special. You can also browse the Shimano Conventional Reels collection or read the Shimano Conventional Reels Buyer's Guide.

The Shimano Tranx 500 Baitcast Reel is built for anglers who refuse to compromise. Whether you're dropping irons on yellowtail, slow-rolling swimbaits on white seabass, or grinding deep structure for trophy bass, the Tranx 500 delivers the torque, drag, and durability to handle it all — in both saltwater and freshwater.

Built for the Tranx 500 Angler

The Tranx 500 fills the gap between a standard baitcaster and a conventional reel. It's compact enough to cast all day, yet powerful enough to stop a 60 lb yellowtail in its tracks. With 25 lbs of Cross Carbon Drag and a super-strong levelwind, this reel is engineered for the moments that matter most.

Why the Tranx 500 Stands Apart

Most baitcasters sacrifice either power or smoothness. The Tranx 500 refuses to choose. HAGANE Body construction keeps the frame rigid under load, while MicroModule Gear technology delivers a silky-smooth retrieve even after years of hard use. X-Ship reduces gear friction for more torque and longer casts — a combination you simply won't find at this price point.

HG or PG — Pick Your Weapon

The HG (High Gear, 6.6:1) retrieves 43 inches per crank — ideal for working irons, Waxwings, Rapala X-Raps, and any technique where faster line recovery keeps your lure in the zone. The PG (Power Gear, 4.6:1) retrieves 30 inches per crank, delivering maximum torque for deep cranking, heavy swimbaits, and turning big fish away from structure. Both models share the same 25 lb max drag and 6+1 bearing system.

The Right Pick If...

• You target yellowtail, white seabass, tuna, or large calico bass
• You need a baitcaster that can handle 65–100 lb braid
• You want one reel that works from the kelp to the deep reef
• You're upgrading from a standard baitcaster and need more stopping power
• You fish heavy swimbaits, irons, or large topwater lures

Best Fishing Techniques

• Iron fishing — HG model excels at fast retrieves with jigs and irons
• Swimbait fishing — PG model delivers the torque to work large paddle tails and glide baits
• Deep cranking — PG's power gear ratio grinds through resistance at depth
• Topwater — HG keeps pace with walk-the-dog and prop baits
• Live bait — smooth drag and levelwind handle live mackerel and sardine presentations

Best Conditions

• Offshore and nearshore saltwater — kelp beds, reefs, and open water
• Freshwater reservoirs and lakes targeting trophy bass and stripers
• Boat fishing where casting distance and line capacity matter
• High-pressure situations where drag consistency is non-negotiable

Best For

• Species: Yellowtail, White Seabass, Bluefin Tuna, Calico Bass, Striped Bass, Large Freshwater Bass
• Techniques: Iron fishing, swimbait, deep cranking, live bait, topwater
• Line: PowerPro Maxcuatro 65–100 lb braid recommended

Key Features

• HAGANE Body — rigid aluminum frame resists flex under heavy loads
• X-Ship — reduces gear friction for more torque and longer casts
• MicroModule Gear — ultra-smooth retrieve with refined gear tooth design
• Cross Carbon Drag — consistent, heat-resistant stopping power up to 25 lbs
• S3D Spool — reduces vibration for smoother casts
• Super Strong Levelwind — handles heavy braid without cutting or fraying
• Comfortable Power Handle — all-day grip for extended sessions
• 6+1 Bearings — smooth operation under load

Models & Specs

Line Capacity

Tackle Express Tips

• Spool with PowerPro Maxcuatro: The Tranx 500's large spool capacity shines with 65–80 lb Maxcuatro — you get incredible sensitivity, zero stretch, and enough capacity for deep water drops.
• Match the gear ratio to your technique: Don't default to HG just because it's faster. If you're fishing heavy swimbaits or grinding deep structure, the PG's torque advantage will save your wrist and turn more fish.
• Rinse after every saltwater session: Despite its saltwater rating, a quick freshwater rinse of the levelwind and handle knobs after each trip will dramatically extend the life of this reel.

FAQ

What's the difference between the HG and PG models?
The HG (High Gear, 6.6:1) retrieves 43 inches per crank — best for fast-moving lures like irons and topwater. The PG (Power Gear, 4.6:1) retrieves 30 inches per crank with more torque — best for heavy swimbaits, deep cranking, and turning big fish.

Can the Tranx 500 handle saltwater fishing?
Yes. The Tranx 500 is built for both saltwater and freshwater use. Its HAGANE Body and Cross Carbon Drag system are designed to withstand the corrosive demands of saltwater environments. Rinse after each use for best longevity.

What line do you recommend for the Tranx 500?
We recommend PowerPro Maxcuatro in 65–80 lb for most saltwater applications. For freshwater or lighter inshore work, 30–50 lb braid is a great choice. The large spool handles high-capacity loads with ease.

Shimano Talica A Two-Speed Lever Drag Reels are built for the moment a strong fish sounds and a single-speed reel runs out of answers. Push-button shifting gives you high-gear line pickup when a tuna runs toward the boat, then low-gear leverage when the fight turns deep and heavy.

The six-size lineup covers SoCal bait fishing, yo-yo iron, sinker rigs, flat-fall and knife jigs, kite fishing, trolling, and long-range saltwater. Match the reel to the line class you actually fish, then use the size guide below to choose the capacity you need.

Two Speeds for the Part of the Fight That Gets Hard

High gear helps you recover line quickly, work a surface iron, and stay connected when a fish changes direction. Low gear gives you more leverage after a fish sounds under the boat. You can shift under load without backing off the drag, which is the advantage that separates this family from a single-speed conventional reel.

What the Talica A Redesign Adds

Models & Size Guide

All six listed sizes are right-hand retrieve. Use the size, line-class, and technique guidance together rather than choosing by fish name alone.

Line Capacity Reference

The following PowerPro capacity figures are confirmed in the current listing. Capacities are shown as line weight/yards.

Best Species, Techniques & Conditions

• Bluefin and yellowtail: Sinker rigs, flylined sardines or mackerel, and yo-yo iron.
• Deep-water jigging: Flat-fall and knife jigs around 200–400 feet, especially with the 20IIA and 25IIA.
• Kite and trolling work: The 25IIA, 40IIA, and 50IIA for heavier offshore presentations.
• Trips: Catalina and Channel Islands runs, 1.5-day and long-range boats, private sportfishers, and Baja saltwater trips.

The Right Pick If...

• You want both fast line pickup and low-gear cranking leverage.
• You fish bluefin on a sinker rig and need a reel that can handle the turn from open water to deep pressure.
• You want a 12IIA or 16IIA for lighter tuna and yellowtail work, or a 20IIA and up for heavier long-range applications.
• You prefer a lever drag with an included light-line cam for more gradual pressure on lighter line.

Tackle Express Tips

• Set strike drag with a scale: Roughly one-third of your topshot's rated breaking strength is a sensible starting point for bait fishing.
• Shift before you are exhausted: Move to low gear when the fish stops running and starts circling, rather than waiting until the rod is fully loaded.
• Protect the reel after the trip: Rinse with low-pressure fresh water, back the lever off for storage, and service the two-speed mechanism regularly.

Frequently Asked Questions

What Talica A size is best for bluefin tuna?

The 20IIA is the lineup's practical starting point for many bluefin sinker-rig applications. The 25IIA adds more 65 lb. PowerPro capacity for longer-range work, while the 12IIA and 16IIA fit lighter 30 lb. class fishing.

What is the difference between the Talica A and older Talica II?

The A series adds Infinity Drive, Cross Carbon Drag, X-Protect water resistance, and an included Light-Line Drag Cam. It is a mechanical redesign rather than a cosmetic update.

Is the Talica A available in left-hand retrieve?

No. All six listed Talica A sizes are right-hand retrieve.

Complete the Setup

Protect the reel with Shimano Talica Reel Covers, or add leverage with the Shimano Talica-A T-Bar Handle Replacement. For line and terminal tackle, browse PowerPro and Seaguar. For the wider comparison, see the Shimano SpeedMaster II, Shimano Conventional Reels collection, or Shimano Conventional Reels Buyer's Guide.

Wide-Profile Two-Speed Power for Trophy Offshore Fish

The Avet HX 5/2 Raptor Plus MC 2 Speed Reel is built for anglers who want wide-profile capacity, serious cranking leverage, and the confidence to stay connected when a trophy fish digs deep. Its 5.0:1 high gear helps recover line and work a presentation, while the 2.4:1 low gear gives you the leverage to keep turning during a long fight.

Picture the moment a big tuna settles into a deep run. The HX 5/2 Raptor Plus MC gives you a solid, controlled platform, a smooth lever drag, and the low-gear authority to keep pressure steady instead of fighting the reel. Precision-machined 6061-T6 aircraft-grade aluminum, stainless steel components, and a multi-color anodized finish make it a purpose-built tool for demanding saltwater work. Made in the USA.

When More Line Capacity and More Leverage Matter

The wide HX profile is the right move when a compact reel does not provide enough room or power for your plan. Choose it for long-range trips, deep-water presentations, and trophy-class tuna or billfish where a fish may take line before you can turn it. The 2-speed system lets you fish fast when the opportunity opens up, then slow down and grind when the fight gets heavy.

Fast Recovery, Heavy-Fish Control

• 5.0:1 high gear: Gain line on running fish and work or recover lures efficiently.
• 2.4:1 low gear: Apply deliberate cranking power when a fish sounds or makes a deep run.
• Smooth shifting: Move between speeds as the fight changes instead of forcing one gear to do everything.
• Lever drag control: Make quick, precise pressure adjustments while keeping your attention on the fish.

The Right Pick If...

• You fish for giant bluefin, yellowfin tuna, marlin, sailfish, or other trophy offshore species.
• You want a wide-profile reel for long-range trips and maximum line capacity.
• You need a 2-speed setup that can move quickly and still deliver low-gear leverage.
• You fish deep-water jigs or heavy tackle for large yellowtail and white seabass.
• You prefer the distinctive MC multi-color anodized finish and a choice of right- or left-hand models.

Best Techniques and Conditions

• Long-range live bait: Use high gear to recover line during a fast run, then shift low when the fish settles into a deep pull.
• Deep-water jigging: The wide profile gives you a serious platform for deep presentations, while the two speeds help manage both retrieve and hookup pressure.
• Heavy offshore bait and trolling: Choose the HX 5/2 when large fish, long runs, and demanding saltwater conditions call for added capacity and leverage.
• Trophy billfish: Keep pressure smooth and deliberate, using low gear when the fish turns into a sustained, heavy fight.

Where It Fits in the Avet Lineup

The HX 5/2 Raptor Plus MC is the wide-profile choice for anglers who prioritize trophy-fish capacity and low-gear power. For a standard HX platform with a more compact profile, compare the Avet HX Raptor 2-Speed Reel. If you want a smaller Raptor setup, see the Avet LX Raptor. For another wide-profile option, compare the Avet HXW Raptor 2-Speed Reel.

Key Features

• Raptor carbon fiber drag system: Smooth, consistent pressure for extended battles.
• 5.0:1 high and 2.4:1 low gears: A practical speed and power combination for trophy fish.
• Wide HX profile: Built to provide maximum line capacity for long-range fishing; exact capacity is not listed in the supplied model details.
• Precision-machined 6061-T6 aluminum: Aircraft-grade construction for strength and durability.
• MC multi-color anodized finish: Corrosion-resistant finish with a distinctive look.
• Stainless steel gears and hardware: Designed for demanding saltwater environments.
• Sealed bearings: Smooth rotation with added corrosion resistance.
• Heat-dissipating drag materials: Helps maintain consistent performance during long fights.
• Made in USA: Manufactured in California with careful quality control.

Models & Specs

Available models and SKUs

Tackle Express Tips

• Use high gear to stay connected when a fish runs toward the boat, then shift to low gear before the fight turns into a heavy, deep pull.
• Set the lever drag at a repeatable strike position before the trip, and make pressure changes smoothly rather than in a rush.
• Match the reel to a rod and line system that can take advantage of its wide-profile capacity and two-speed leverage.

FAQ

What is the difference between the HX 5/2 Raptor Plus MC and a standard HX Raptor?
The HX 5/2 Raptor Plus MC uses a wide HX profile with 5.0:1 high and 2.4:1 low gears, making it a strong fit for anglers prioritizing trophy-fish capacity and low-gear leverage. Compare the standard HX Raptor for a different platform and model lineup.

Does this reel come in left-hand retrieve?
Yes. The listed models include a left-hand Silver option along with right-hand Silver/Red, Black/Red, Silver, Blue, Black, and Gunmetal options.

How do I compare Avet sizes and fishing applications?
Use the Avet Reels Buyer’s Guide for a practical comparison of reel sizes, gear setups, retrieve options, and offshore use cases.

Complete the Setup

For a full Avet comparison, start with the Avet Reels Buyer’s Guide. Protect the reel between trips with the Avet Reel Cover, and compare the Avet HXJ 5/2 Raptor Plus MC when you want to evaluate another Raptor platform.

The Accurate Ascender Star Drag Reel brings Accurate's legendary TwinStarDrag® technology into a lightweight, USA-made conventional package. Whether you're casting iron for yellowtail, soaking live bait for tuna, or working the bottom for striped bass, this reel delivers smooth, consistent drag pressure with the durability anglers expect from Accurate.

Where Standard Star Drags Fall Short

Most conventional star drag reels apply drag pressure from a single side of the main gear. Under sustained load, that creates uneven wear and heat buildup that degrades smoothness over time. The Ascender's patented TwinStarDrag® system applies stainless steel and carbon fiber washers on both sides of the main gear — distributing pressure evenly, running cooler, and maintaining consistency across multiple runs. It's the same core drag philosophy as Accurate's lever drag lineup, now in a star drag format.

Built on the Ascender Platform

• TwinStarDrag® system — dual-sided drag application on the main gear, up to 24 lbs max drag depending on model
• 6061 T-6 aircraft-grade aluminum with CVX® frame — rigid, lightweight, built in the USA
• Xtreme Casting Technology® (XCT) — centrifugal cast control system reduces backlash and extends casting distance
• Main Gear Bearing Support (MBS) — reduces flex in the gear train under high drag loads
• 6 ABEC 3 ball bearings + 1 roller bearing — ultra-smooth retrieve
• Stainless steel gears — corrosion-resistant, built for saltwater
• Aluminum power arm with rubber football knob — solid cranking feel
• Spool lock mechanism — secures the spool during transport or rigging
• Made in the USA

The Right Pick If...

• You want Accurate's TwinDrag® performance in a star drag form factor
• You're fishing live bait, jigs, or bottom rigs and want a reel that casts cleanly and tracks smoothly under load
• You're targeting yellowtail, tuna, striped bass, or inshore species where drag consistency matters
• You want a USA-made reel at a conventional star drag price point

Best Fishing Techniques

• Live bait fishing (sardines, mackerel, squid)
• Iron casting / metal jigs
• Slow pitch and vertical jigging
• Bottom fishing and dropper loops

Best Conditions

• Nearshore and offshore saltwater
• Kelp paddy and island fishing
• High-current environments where casting accuracy matters
• Any application requiring smooth, sustained drag pressure

Best For

• Yellowtail, white seabass, and bluefin tuna
• Striped bass and inshore pelagics
• Anglers stepping up from entry-level star drag reels who want Accurate quality
• Any angler who wants lever drag performance without a lever drag price

Key Features

• TwinStarDrag® — dual-sided main gear drag for even pressure and heat distribution
• CVX® aluminum frame — lightweight, rigid, USA-made
• XCT® casting technology — centrifugal backlash control
• MBS gear support — reduces gear flex under load
• 6+1 ABEC 3 bearings — smooth retrieval
• Stainless steel gears — corrosion-resistant
• Spool lock mechanism
• 6:1 gear ratio across all models

Models & Specs

Braid capacity measured using Izorline natural white.

Tackle Express Tips

• The AX-300X and AX-400X are the go-to sizes for local kelp and island trips targeting yellowtail on live bait or iron. Light enough to cast all day, enough drag to turn fish on 30–40 lb braid.
• The XN (narrow) models (500XN, 600XN) hold less line but are more compact and better balanced on lighter rods. If you're fishing 50–65 lb braid on a shorter stick, the XN is worth the tradeoff.
• Before your first salt trip, back the star drag off completely and re-set it under load — it seats the drag washers evenly and gives you a more accurate feel for where your drag pressure settings actually are.

FAQ

What's the difference between the X and XN models?
The XN (narrow) variants have a smaller spool capacity and a more compact profile. They're ideal when you don't need full line capacity but want a lighter, better-balanced reel on a medium-action rod.

Is the Ascender Star Drag made in the USA?
Yes. Accurate manufactures their reels in the USA, and the Ascender Star Drag is no exception. That's part of what justifies the price point over import alternatives.

How does TwinStarDrag® differ from a standard star drag?
Standard star drags apply pressure from one side of the main gear. TwinStarDrag® applies stainless and carbon fiber drag washers on both sides simultaneously — distributing heat and pressure evenly for smoother, more consistent performance under sustained load.

The Okuma Makaira SEa 2 Speed Lever Drag Reels feature Special Edition Gun Metal and Black anodizing with a yellowfin tuna etched into the sideplate. The Carbonite dual force drag system maximizes high-end drag pressure, efficiency, and overall smoothness. Its oversized handle and lower low-speed gearing versus the original Makaira serve up extreme torque for battling trophy fish.

Key Features:

• Special Edition Anodizing: Gun Metal and Black finish with yellowfin tuna etching
• Carbonite Dual Force Drag: Maximizes high-end drag pressure and smoothness
• TSI-301 Oil on Spool Bearings: Increases freespool 2-1/2 times
• Full Grease Pack Bearings: All non-spool bearings for maximum longevity
• Machined Frame Clearance: Increased clearance between spool and cross bars
• Oversized Handle Knobs: MK-8/10/15 feature MK-20 size, MK-20/30 feature MK-50 size
• Lower Speed Gearing: 1.3:1 in 20/30 sizes, 1.0:1 in 50 size for extreme torque
• 2-Speed Gearing System: High-speed retrieve and low-speed power
• Helical Cut Gearing: Smooth, quiet operation
• Silent Anti-Reverse: Instant hooksets without noise
• CRC Coating: Corrosion-Resistant Coating for saltwater durability
• Machined Rigid Frame: Maximum strength and stability
• T-Bar Handle: Ergonomic design for all-day cranking

Specifications Table:

Line Capacity:

• MK-15IISEA: 550/20 lb, 410/25 lb, 310/30 lb
• MK-16IISEa: 870/20 lb, 650/25 lb, 500/30 lb
• MK-20IISEA: 870/25 lb, 660/30 lb, 530/40 lb
• MK-30IISEA: 850/30 lb, 700/40 lb, 550/50 lb

Performance Advantages:

• 2.5x Freespool Increase: TSI-301 oil on spool bearings for effortless casting
• Extreme Torque: Lower low-speed gearing for maximum cranking power
• Dual Force Drag: Up to 55 lbs of stopping power
• Special Edition Finish: Gun Metal and Black with yellowfin tuna etching
• Oversized Components: Larger handle knobs for improved grip and leverage
• Topless Frame Design: Easy spool access and reduced weight

Ideal Applications:

• Offshore trolling for yellowfin tuna, bluefin tuna, and marlin
• Big game fishing requiring extreme torque and drag
• Long-range fishing trips
• Targeting trophy-class pelagic species
• Situations requiring 2-speed versatility
• Serious offshore anglers demanding premium performance

When you need a premium Special Edition 2-speed lever drag reel with Carbonite dual force drag, TSI-301 oil for 2.5x freespool increase, and extreme torque gearing for trophy tuna and big game fish, the Okuma Makaira SEa is the choice of elite offshore anglers.

Note: Gun Metal color may vary.

Extra-Wide Two-Speed Power for Maximum Line Capacity

The Avet HXW 5/2 Raptor Plus Non-MC 2 Speed Reel is built for trophy anglers who need an extra-wide platform, serious line capacity, and the leverage to stay in control when large offshore fish go deep. Its 5.0:1 high gear helps recover line and work lures, while the 2.4:1 low gear gives you the cranking power to keep pressure on the biggest fish.

When a long-range hookup turns into a sustained offshore battle, the HXW profile gives you room for the heavy braid and mono these applications demand. The massive spool, Raptor carbon fiber drag, CNC-machined 6061-T6 aircraft-grade aluminum frame, stainless steel components, and corrosion-resistant finish are designed for bluefin, yellowfin, marlin, sailfish, large yellowtail, and other trophy gamefish. This is the No-MC configuration, made in California.

When Extra-Wide Capacity Earns Its Keep

The HXW 5/2 Raptor Plus is the right pick when maximum line capacity is central to the plan. Choose it for long-range trips, deep-water jigging, and trophy fish that can take line before you have a chance to turn them. The wide profile also gives you a substantial platform for heavy tackle and long, demanding fights.

Two Speeds, One Serious Offshore Job

• 5.0:1 high gear: Gain line on running fish and work or recover lures efficiently.
• 2.4:1 low gear: Apply maximum cranking power when a trophy fish sounds or stays deep.
• Smooth shifting: Change speeds as the fight moves from line recovery to heavy pressure.
• Raptor drag: Use smooth, consistent pressure through long battles.

The Right Pick If...

• You target giant bluefin, yellowfin, marlin, sailfish, large yellowtail, or other trophy offshore species.
• You need an extra-wide reel for maximum line capacity on long-range fishing trips.
• You fish heavy braid or mono and want a large spool for deep-water and big-game applications.
• You prefer direct No-MC cast-control performance.
• You want right- or left-hand retrieve options in a USA-made Raptor Plus platform.

Best Techniques and Conditions

• Long-range live bait: Use high gear to recover line during a run, then shift low when the fish settles into a deep pull.
• Deep-water jigging: Take advantage of the large spool and low gear when a heavy fish needs to be worked up from depth.
• Kite fishing and offshore bait: The extra-wide platform suits long runs and heavy line systems for trophy yellowfin and tuna.
• Heavy trolling: Use low gear for leverage when a marlin or sailfish turns a fast run into a close-range grind.

Where It Fits in the Avet Lineup

The HXW 5/2 Raptor Plus Non-MC is the extra-wide two-speed choice when maximum capacity and direct cast-control performance matter most. For a three-speed HXW platform, compare the Avet HXW 5/3 Raptor Plus. For a more compact wide-profile reel with MC finish, see the Avet HX 5/2 Raptor Plus MC. For another two-speed HXW configuration, compare the Avet HXW Raptor 2-Speed Reel.

Key Features

• Two-speed gearing: 5.0:1 high and 2.4:1 low.
• Raptor carbon fiber drag: Smooth, consistent pressure under extreme load.
• Extra-wide HXW profile: Built for maximum line capacity and long-range fishing.
• Massive spool: Designed for heavy braid and mono in deep-water and trophy applications.
• No-MC configuration: Direct, non-magnetic cast-control performance.
• CNC-machined 6061-T6 aircraft-grade aluminum: Strength and durability for serious offshore use.
• Stainless steel gears and hardware: Built for extreme saltwater environments.
• Sealed bearings and heat-dissipating drag materials: Smooth operation and consistent performance during long fights.
• Corrosion-resistant anodized finish: Added protection in saltwater.
• Made in USA: Manufactured in California.

Models & Specs

Available models and SKUs

Tackle Express Tips

• Use high gear to catch up to a running fish, then shift into low before a deep run turns into a leverage problem.
• Set the strike position before the trip and make drag changes smoothly while the fish is moving.
• Use the extra-wide spool for a line system built around the reel’s intended long-range and trophy-fish applications.

FAQ

What makes the HXW different from the HX or HXJ?
The HXW uses an extra-wide profile and large spool built around maximum line capacity. The HX is a more compact wide-profile platform, while the HXJ is narrower and more comfortable when a smaller footprint matters.

Is this the MC version?
No. This listing is the No-MC configuration with direct, non-magnetic cast-control performance.

Where can I compare Avet reel sizes and applications?
Use the Avet Reels Buyer’s Guide for reel-size comparisons, retrieve options, gear setups, and offshore use cases.

Complete the Setup

Compare the Avet HXW 5/3 Raptor Plus if you want three-speed control, or protect your reel between trips with the Avet Reel Cover. The Avet Reels Buyer’s Guide can help match the HXW platform to your offshore plan.

Daiwa Saltiga Star Drag Conventional Reels

When the bite is on and a yellowtail is burning drag at the rail, you need a reel that won’t flinch. The Daiwa Saltiga Star Drag conventional reel is built for exactly that moment — a precision-machined, corrosion-resistant workhorse engineered to perform in the harshest saltwater environments on the planet. With Magsealed ball bearing technology sealing the main bearing against saltwater intrusion and a one-piece machined aluminum frame delivering unmatched rigidity, the Saltiga Star Drag is the reel serious offshore anglers reach for when the stakes are highest.

Saltiga star drag reels are perfect for live bait due to the incredible free spool.  The 30, 35, and 40 sizes are perfect for throwing surface or yo-yo irons but also work for rock/bottom fishing.  The 15 and 20 sizes are ideal for calico bass, halibut, smaller yellowtail, smaller tuna, and white seabass.

Key Features

• Magsealed ball bearing (MBB) — main bearing sealed with Mag oil for maximum corrosion resistance
• 9-bearing system: 1 MBB + 7 CRBB + 1 RB (smaller models); 8 CRBB + 1 RB (larger models)
• Precision machined one-piece aluminum frame and right side plate for unmatched rigidity
• Ultimate Tournament Carbon Drag (UTD) — up to 25 lb max drag on larger models
• 6.4:1 gear ratio (5.1:1 on 40A/50A models) for fast, powerful retrieves
• Spool lock mechanism protects gears when engaged
• Machined aluminum spool for strength and smooth line lay
• EVA custom handle knob for all-day comfort
• Non-spool click design

Techniques

Jigging, live bait fishing, trolling, dropper loop, and deep drop for tuna, yellowtail, halibut, and offshore pelagics.

Specifications

Introducing Okuma's Tesoro Spinning Reels, designed with an Alumilite body, side plate, and Cyclonic Flow Rotor for unparalleled strength and performance. With IPX-7 waterproof technology, these reels offer the ultimate in features and protection, allowing you to dominate any fishing situation from inshore to offshore.

The Tesoro features a 12HPB + 1RB corrosion-resistant stainless-steel bearing drive as well as a Carbonite high output DFD drag system with Cal's drag grease that puts out over 55 pounds of pure fish-stopping drag. The reel is built with a custom titanium spool shaft that reduces flex and weight, as well as oversized brass main gear and C-6191 brass pinion gear that is double supported with ball bearings. The frictionless main shaft design provides smooth operation day in and day out, while the dual anti-reverse system provides maximum strength and reliability.

The rigid machined aluminum screw-in handle design provides direct feedback when turning the handle and locks solidly into place. A rotor brake system works in conjunction with the Tesoro's manual bail trip design for precise control. There are six total models within the Tesoro Spinning reel lineup: 6,000, 8,000, 10,000, 14,000, 18,000, and 20,000 sizes. The three smaller sizes feature high-speed gearing at 5.8:1 with retrieval of 49" of line per turn of the handle. The three larger sizes feature 4.4:1 gear ratio and pick up close to 42" of line per handle turn. All models have an interchangeable screw-in handle system that can be changed from left to right-hand retrieve.

Key Features:

• Alumilite Body & Side Plate: Unparalleled strength with lightweight construction
• IPX-7 Waterproof Technology: Ultimate protection against water intrusion
• 12HPB + 1RB Bearing System: Corrosion-resistant stainless-steel bearings for smooth operation
• Carbonite High Output DFD Drag: Over 55 lbs of fish-stopping drag with Cal's drag grease
• Custom Titanium Spool Shaft: Reduces flex and weight for improved performance
• Oversized Brass Main Gear: C-6191 brass pinion gear double supported with ball bearings
• Frictionless Main Shaft Design: Smooth operation day in and day out
• Dual Anti-Reverse System: Maximum strength and reliability
• Rigid Machined Aluminum Handle: Screw-in design provides direct feedback and solid lock
• Rotor Brake System: Works with manual bail trip design for precise control
• Cyclonic Flow Rotor (CFR): Enhanced airflow to minimize drying time
• Interchangeable Handle: Can be changed from left to right-hand retrieve

Specifications:

• Body Material: Alumilite body and side plate
• Waterproof Rating: IPX-7 waterproof technology
• Bearings: 12HPB + 1RB corrosion-resistant stainless-steel
• Drag System: Carbonite high output DFD with Cal's drag grease
• Max Drag: Over 55 lbs
• Spool Shaft: Custom titanium for reduced flex and weight
• Gearing: Oversized brass main gear with C-6191 brass pinion
• Target Species: Yellowtail, tuna, calico bass, stripers, large inshore and offshore species

Size Options & Gear Ratios:

• 6,000, 8,000, 10,000 Sizes: High-speed 5.8:1 gear ratio, 49" line retrieval per handle turn
• 14,000, 18,000, 20,000 Sizes: Power 4.4:1 gear ratio, 42" line retrieval per handle turn

Performance Advantages:

• IPX-7 Waterproof Protection: Ultimate defense against saltwater intrusion
• 55+ Pounds of Drag: Stops trophy fish in their tracks
• Titanium Spool Shaft: Reduces flex during hard fights
• Double Supported Pinion: Ball bearings on both sides for maximum strength
• Frictionless Design: Smooth operation season after season
• Dual Anti-Reverse: Rock-solid hooksets every time

Ideal Applications:

• Offshore fishing for yellowtail, tuna, and pelagic species
• Heavy inshore fishing for large stripers and calico bass
• Surf fishing for trophy-class fish
• Fishing in harsh saltwater environments
• Situations requiring maximum drag power and waterproof protection
• Long-range fishing trips
• Targeting large, hard-fighting saltwater species

When you need a premium saltwater spinning reel with IPX-7 waterproof technology, Alumilite construction, over 55 lbs of drag, and titanium spool shaft for battling trophy fish, the Okuma Tesoro Spinning Reels are the choice of serious offshore and inshore anglers.

Compact Two-Speed Control for Versatile Saltwater Fishing

The Avet JX 6/3 Raptor MC Plus 2 Speed Reel combines a compact, narrow-profile JX frame with Raptor drag performance and a distinctive MC multi-color anodized finish. Its 6.0:1 high gear helps you recover line and work lures, while the 3.0:1 low gear gives you added cranking leverage when a fish sounds, circles, or pulls hard near the boat.

When your day moves from yellowtail and tuna to dorado, wahoo, rockfish, or lingcod, the JX 6/3 Raptor MC Plus keeps the setup adaptable without becoming cumbersome. Precision-machined 6061-T6 aircraft-grade aluminum, stainless steel components, sealed bearings, and a smooth lever drag are built for demanding offshore and inshore saltwater use. Available in right- and left-hand retrieve. Made in California.

Compact Size, Real Two-Speed Versatility

The narrow JX profile stays comfortable in hand while giving you two useful retrieve ranges. Use high gear when speed and line recovery matter, then shift into low when the fish changes the rules and steady cranking power becomes more important than raw retrieve speed.

High Gear to Move, Low Gear to Finish

• 6.0:1 high gear: Gain line on a running fish and work lures efficiently.
• 3.0:1 low gear: Add leverage when a fish sounds or makes a heavy turn.
• Raptor carbon drag: Maintain smooth, consistent pressure during extended fights.
• MC finish: Add a corrosion-resistant multi-color anodized finish to a purpose-built saltwater reel.

The Right Pick If...

• You want a compact, narrow-profile 2-speed reel.
• You target yellowtail, tuna, dorado, wahoo, white seabass, rockfish, or lingcod.
• You fish both offshore and inshore saltwater applications.
• You want MC anodized styling with Raptor drag performance.
• You need right- or left-hand retrieve options in a versatile JX platform.

Best Techniques and Conditions

• Live-bait fishing: Use high gear to recover line when a fish runs, then shift low when the fish turns deep.
• Jigging: Work and recover the jig in high gear, with low gear ready for the heavy pressure after the hookset.
• Coastal yellowtail and white seabass: The compact JX platform is comfortable for repeated casts and long sessions.
• Offshore tuna and wahoo: Use the two-speed system to move quickly between line recovery and controlled leverage.
• Deep-water rockfish and lingcod: Shift to low gear when a fish needs steady pressure coming up from depth.

Where It Fits in the Avet Lineup

The JX 6/3 Raptor MC Plus is the compact JX option when you want 6.0:1/3.0:1 gearing and an MC finish. For the classic JX Raptor platform with 6.3:1/3.8:1 gearing and MC cast control, compare the Avet JX Raptor. For G2 simplicity and a more moderate drag range, see the Avet JX G2. For three-speed control, compare the Avet Raptor Plus MC 3 Speed.

Key Features

• Two-speed gearing: 6.0:1 high and 3.0:1 low.
• Raptor carbon fiber drag: Smooth, consistent pressure under load.
• Compact narrow profile: Comfortable handling for extended fishing.
• MC multi-color anodized finish: Corrosion-resistant finish with a distinctive look.
• CNC-machined 6061-T6 aircraft-grade aluminum: Strong, durable frame construction.
• Stainless steel gears and hardware: Built for saltwater environments.
• Sealed bearings: Smooth operation with added corrosion resistance.
• Lever drag control: Precise pressure adjustments during the fight.
• Right- and left-hand retrieve: Six listed configurations.
• Made in USA: Manufactured in California.

Models & Specs

Available models and SKUs

Tackle Express Tips

• Use high gear for line recovery, then shift to low before a deep-running fish turns the fight into a leverage test.
• Set the strike position before the trip and make lever-drag changes gradually as the fish changes direction.
• Match the reel to a rod and line system designed for the intended species and saltwater technique.

FAQ

What are the gear ratios on the JX 6/3 Raptor MC Plus?
The listed ratios are 6.0:1 in high gear and 3.0:1 in low gear.

Does this reel come in left-hand retrieve?
Yes. The listed lineup includes a left-hand Silver model along with right-hand Black, Silver, Blue, Gunmetal, and Red models.

Where can I compare Avet reel sizes and fishing applications?
Use the Avet Reels Buyer’s Guide for reel-size comparisons, retrieve options, gear setups, and offshore use cases.

Complete the Setup

Keep the reel protected between trips with the Avet Reel Bags, and check compatible hardware with the Avet Reel Clamp Kits. For a different two-speed feel, compare the Avet JX Raptor.

The Okuma Tesoro Lever Drag Jigging Reel is engineered for expert saltwater anglers demanding power, precision, and durability in deep-water and offshore environments. Its solid one-piece 6061-T6 machined aluminum frame and forged side plates deliver exceptional rigidity under extreme load — so you can focus on the fight, not the gear.

The cold-forged, Type-II anodized spool ensures consistent line lay and long-term corrosion resistance, while the advanced Carbonite Dual Force Drag system delivers up to 46 lbs of smooth, controlled drag — enough stopping power for the biggest pelagics in the water column.

Key Features

• Solid one-piece 6061-T6 machined aluminum frame
• Forged aluminum side plates for maximum rigidity
• Cold-forged, Type-II anodized aluminum spool
• Carbonite Dual Force Drag system — up to 46 lbs drag
• Lever drag system for precise, on-the-fly drag adjustment
• Corrosion-resistant construction for saltwater use
• Available in left-hand (LDJ 2000NLA) and right-hand (LDJ 2000NA) retrieve

Best For

• Techniques: Vertical jigging, slow pitch jigging, deep-drop fishing
• Target Species: Yellowfin tuna, bluefin tuna, yellowtail, amberjack, grouper, and other medium size pelagics
• Environments: Offshore, deep-water, and open-ocean saltwater fishing
• Anglers: Intermediate to expert saltwater anglers who need reliable, high-drag performance

Specifications

Engineered for serious slow-pitch anglers, the Accurate Valiant BV2 SPJ 500N Slow Pitch Jigging Reels delivers exceptional performance, durability, and finesse to every drop. Every design choice is optimized for jigging — from the light, curved frame to the drag system engineered for smooth power — so you can focus on technique and the fight, not your gear.

Discontinued item, no returns or exchanges.

Key Features & Benefits

• TwinDrag® System
  The Valiant SPJ uses a patented TwinDrag® setup, applying drag pressure evenly from both sides of the spool. This reduces uneven wear, improves heat dissipation, and gives you smoother drag performance under load.

• CVX® Curved Frame & Sideplate Design
  Machined from high-grade aluminum, the frame and sideplate adopt a curved structure (CVX® technology) that removes unnecessary material while preserving rigidity. This results in a lighter reel with excellent strength and torsional resistance.

• 17-4 Stainless Steel Gears & Shaft
  Internal drive components are made from 17-4 heat-treated stainless steel, providing longevity, corrosion resistance, and reliable torque even in harsh saltwater environments.

• Sleeved Spool Construction
  A sleeved spool design reduces friction on the spool shaft, enhancing free-spool performance. That means smoother drops, better line behavior, and less friction drag when letting your jigs fall.

• Optimized SPJ Components
  Compared to standard Valiant models, SPJ versions typically omit the clicker, include an SPJ-specific knob, and use a handle length tailored for jigging leverage. These refinements improve ergonomics and reduce fatigue during long sessions.

• High Drag Capacity in Compact Package
  Despite their relatively lightweight builds, Valiant SPJ reels can deliver robust drag — suitable for serious bottom fish, tuna, and other strong fighters — depending on model (e.g. 24 lb, 30 lb, or more).

• Made in the USA / Quality Craftsmanship
  These are assembled and tested under high standards to ensure precision tolerances and consistent performance.

Accurate Tern 2 Star Drag - Special Los Angeles Edition

The Special Los Angeles Edition Tern 2 features a striking blue and silver finish with a custom-engraved side plate that celebrates LA's iconic culture. The engraving includes "I Love LA" lettering, Los Angeles script, a baseball, and palm trees — a nod to the city's rich fishing heritage and its unmistakable SoCal lifestyle. It's a limited-edition collector's piece that stands out on the boat as much as it performs on the water.

Why Anglers Choose the Accurate Tern 2 Star Drag

The Accurate Tern 2 Star Drag is a purpose-built conventional reel engineered for anglers who demand precision, power, and reliability when targeting hard-fighting saltwater gamefish. Built in the USA from 7075 aircraft-grade aluminum, the Tern 2 combines Accurate's signature TwinStar Drag system with stainless steel gears and an ARB anti-reverse bearing to deliver the stopping power and hook-setting authority needed for tuna, yellowtail, and other pelagic bruisers.

Built for Live Bait and Jig Fishing

The main benefit of the Tern 2 is its star drag configuration, which gives anglers the ability to make quick, on-the-fly drag adjustments during a fight — critical when a big fish makes a sudden run. The TwinStar Drag system places dual carbon drag plates on both sides of the spool for smooth, consistent pressure with no grab or stutter, even at high drag settings. Combined with the instant anti-reverse bearing, you get solid hooksets and the stopping power to turn a fish before it reaches structure.

The Problem It Solves

Many conventional reels in this class suffer from inconsistent drag pressure, heavy weight that causes fatigue during long days on the water, or gears that strip under heavy load. The Tern 2 addresses all three: the TwinStar Drag delivers buttery-smooth, consistent pressure throughout the fight, the 7075 aluminum frame keeps weight down without sacrificing rigidity, and the stainless steel gear train handles high-torque cranking without flexing or failing.

What Makes It Stand Out — and What to Watch For

Advantages: Made in the USA with 7075 aircraft-grade aluminum, TwinStar dual-drag system for smooth and consistent pressure, ARB instant anti-reverse for solid hooksets, stainless steel main and pinion gears for durability, 6 stainless steel ball bearings for ultra-smooth operation, and a power handle for maximum cranking leverage.

Considerations: As a star drag reel, it's optimized for live bait and jig fishing rather than high-speed lure casting. The single-speed design means no on-the-fly gear ratio changes — if you need two-speed capability, consider a lever drag model instead. The premium price reflects the USA-made construction and high-end components.

The Right Pick If...

You fish live bait or yo-yo jigs for tuna, yellowtail, amberjack, or other powerful saltwater species and want a reel that delivers smooth, consistent drag and rock-solid hooksets. The Tern 2 is ideal for private boaters, sport boat anglers, and long-range fishermen who need USA-made reliability without the complexity of a two-speed reel.

Best Fishing Techniques

• Live Bait Fishing: Fly-line a sardine or mackerel with the reel in free spool, then engage and set the hook — the star drag lets you fine-tune pressure as the fight develops
• Yo-Yo Jigging: Drop a heavy iron jig to the bottom and wind fast — the power handle and high-speed retrieve bring the jig through the strike zone efficiently
• Bottom Fishing: The strong drag and rigid frame make it well-suited for pulling hard-fighting bottom fish up from deep water
• Flat-Fall Jigging: Drop a flat-fall jig and let it flutter — the smooth drag pays out line without backlash when a fish strikes on the fall

Best Conditions

• Water Type: Saltwater — offshore, nearshore, and long-range applications
• Structure: Kelp paddies, offshore banks, seamounts, wrecks, and reefs where tuna and yellowtail hold
• Current: The strong drag and rigid frame handle heavy current and deep-water scenarios where lighter reels struggle
• Season: Productive year-round, especially during tuna and yellowtail seasons when live bait and jig presentations are most effective

Best For

• Species: Yellowfin tuna, bluefin tuna, yellowtail, amberjack, grouper, snapper, and other hard-pulling saltwater gamefish
• Techniques: Live bait fly-lining, yo-yo jigging, flat-fall jigging, bottom fishing
• Environments: Offshore banks, kelp paddies, seamounts, wrecks, and long-range sport fishing
• Angler Level: Intermediate to advanced — designed for anglers who understand drag management and conventional reel operation

Key Features

• TwinStar Drag System: Dual carbon drag plates on both sides of the spool deliver smooth, consistent pressure with no grab or stutter
• ARB Instant Anti-Reverse: Stainless steel anti-reverse bearing eliminates back-play for solid, immediate hooksets
• 7075 Aircraft-Grade Aluminum: Rigid frame and side plates machined from premium aluminum for maximum strength with minimal weight
• Stainless Steel Gears: Main and pinion gears cut from stainless steel for durability and smooth cranking under heavy load
• 6 Stainless Steel Ball Bearings: Ultra-smooth operation and corrosion resistance for saltwater environments
• Power Handle: Ergonomic power handle knob for maximum cranking leverage when fighting big fish
• Made in the USA: Designed and manufactured in the USA to exacting quality standards
• Special Los Angeles Edition: Limited edition with unique cosmetic details celebrating the Los Angeles fishing heritage

Models & Specs

• Model: Accurate Tern 2 Star Drag — Special Los Angeles Edition
• Type: Conventional star drag, single speed
• Frame Material: 7075 aircraft-grade aluminum
• Gear Material: Stainless steel main and pinion gears
• Bearings: 6 stainless steel ball bearings + 1 ARB anti-reverse bearing
• Drag System: TwinStar dual carbon drag plates
• Weight: 42 oz
• Country of Origin: USA

Tackle Express Tips

• Pre-Set Your Drag: Before the first bait hits the water, set your drag to approximately 25–30% of your line's breaking strength. The star drag lets you fine-tune during the fight, but starting in the right zone prevents break-offs on the initial run
• Keep It Clean: After every saltwater trip, rinse the reel with fresh water and let it air dry. A light coat of reel oil on the handle knob and drag washers keeps everything running smooth trip after trip
• Match Your Rod: Pair the Tern 2 with a medium-heavy to heavy conventional rod rated for 30–80 lb line. A well-matched rod lets the reel's drag system work at its full potential

Frequently Asked Questions

What's the difference between star drag and lever drag?

Star drag reels use a star-shaped knob to adjust drag pressure, giving you fine control during the fight. Lever drag reels use a preset lever system with strike and full positions. Star drag is preferred by many anglers for live bait fishing because you can make micro-adjustments on the fly, while lever drag is often favored for trolling and chunking where you want repeatable, preset drag settings.

Is the Tern 2 suitable for trolling?

While the Tern 2 can handle trolling applications, it's optimized for live bait and jig fishing where the star drag's adjustability shines. For dedicated trolling, a lever drag reel may offer more convenient preset drag positions. That said, many anglers successfully troll with star drag reels, especially for smaller tuna and yellowtail.

The Shimano Twin Power SW Spinning Reels are designed for anglers demanding strength and durability. The TwinPower SWC dominates even the most challenging fighting offshore game fish. Now featuring Infinity Drive to provide anglers with more cranking power under load, the TwinPower SW will put anglers in the driver's seat to win the battle even against the most hard-fighting game fish.

New for 2021, the TwinPower SW 10000 and 14000 models incorporate Shimano's Heatsink Drag to deliver overwhelming drag performance by dissipating heat away from the spool to reduce drag-force drop caused by friction. The Heatsink Drag also provides insulation against potentially-damaging heat flowing into the line to give the anglers increased performance during blistering runs and long fights with hard-fighting game fish.

Whether targeting reef species with jigs or pitching live baits to pelagics, the new TwinPower SW empowers anglers to have a distinct advantage and conquer any battle.

Features:

High-Speed Pickup and Low-Gear Offshore Power

The Avet MXL 6/3 Raptor Plus MC 2-Speed Reel is built for anglers who want a fast retrieve for gaining line and a powerful low gear for the heavy part of the fight. Its 6.0:1 high gear and 3.0:1 low gear let you change tactics when a fish runs, sounds, or turns toward structure, while the Raptor drag system delivers smooth, consistent pressure under load.

Precision-machined 6061-T6 aircraft-grade aluminum, stainless steel components, sealed bearings, lever drag control, and an MC multi-color anodized finish give this reel the durable, purpose-built feel serious offshore tackle demands. The lineup includes right-hand models in Silver, Blue, Black, and Gunmetal, plus a left-hand Silver model. It is made in the USA.

One Reel, Two Ways to Win the Fight

Fast gear is your advantage when a fish runs toward the boat or when you need to quickly take back slack. Low gear is where the reel earns its keep, giving you a slower, more powerful retrieve when the fish is deep and every turn of the handle matters. That change of pace is the point of the MXL 6/3 Raptor Plus MC: it gives you a direct response to what the fish is doing instead of forcing one retrieve speed through the entire fight.

Built for Long, Demanding Offshore Days

The MXL 6/3 Raptor Plus MC is designed for offshore big-game applications including tuna, marlin, wahoo, dorado, grouper, amberjack, and other hard-fighting saltwater species. Use it when the trip calls for a machined aluminum conventional reel, a reliable two-speed mechanism, and a finish and component package made for repeated saltwater use.

The Right Pick If...

• You want a dedicated offshore 2-speed reel with a fast 6.0:1 gear and powerful 3.0:1 low gear.
• You fish for tuna, marlin, wahoo, dorado, grouper, amberjack, or similar gamefish.
• You want Raptor drag performance with precise lever control.
• You value a precision-machined aluminum frame and stainless steel components.
• You want right-hand color choices or the listed left-hand Silver configuration.

Where It Fits in the Avet Lineup

The MXL 6/3 Raptor Plus MC is the offshore-focused MXL option with 6.0:1/3.0:1 gearing and a multi-color anodized finish. For the standard MXL Raptor 2-Speed with 6.4:1/3.8:1 gearing and up to 31 lb of listed full drag, compare the Avet MXL Raptor. For a single-speed G2 setup, see the Avet G2 MXL Single Speed. If you want a smaller, narrower Raptor platform, compare the Avet MXJ Raptor.

Best Techniques and Conditions

• Offshore trolling: Use high gear to gain line quickly when a fish changes direction, then shift to low gear when it turns deep.
• Live-bait fishing: The lever drag gives you quick pressure control while the two-speed system lets you match your retrieve to the fish.
• Offshore jigging: High gear helps you work a presentation and recover slack, while low gear adds leverage after the hookset.
• Heavy saltwater applications: The machined aluminum frame, stainless components, and sealed bearings suit demanding offshore conditions.

Choose the MXL 6/3 when you want a larger, purpose-built offshore setup that can move quickly and still produce steady cranking power when the fight gets serious.

Key Features

• Two-speed drivetrain: 6.0:1 high gear and 3.0:1 low gear.
• Raptor drag system: Smooth, consistent performance under heavy pressure.
• Precision-machined 6061-T6 aluminum: Strong aircraft-grade frame construction.
• MC multi-color anodized finish: Corrosion-resistant finish with a distinctive look.
• Stainless steel components: Built for saltwater environments.
• Sealed bearings: Smooth rotation with added protection from the elements.
• Lever drag: Precise control for quick adjustments during the fight.
• Right- and left-hand options: Right-hand color choices plus the listed left-hand Silver model.
• Made in USA.

Models & Specs

Available models and SKUs

Tackle Express Tips

• Use high gear while a fish is moving toward the boat, then shift to low gear when you need steady torque.
• Set the lever drag before the trip and make smooth, deliberate adjustments during the fight.
• Match the retrieve to your rod setup before ordering. The listed lineup includes right-hand models and a left-hand Silver model.

FAQ

What are the gear ratios on the MXL 6/3 Raptor Plus MC?
The reel uses a 6.0:1 high gear and a 3.0:1 low gear.

Does this MXL 6/3 listing include a left-hand option?
Yes. The listed lineup includes a left-hand Silver model, along with right-hand Silver, Blue, Black, and Gunmetal models.

How do I compare the MXL 6/3 with other Avet reels?
Our Avet Reels Buyer’s Guide walks through reel sizes, retrieve options, gear setups, and fishing applications. You can also compare the standard MXL Raptor 2-Speed and the G2 MXL Single Speed.

Complete the Setup

Protect the reel between trips with the Avet Reel Cover. For replacement or color-matched hardware, see the Avet Reel Clamp Kits. If you want a narrower reel platform for a different setup, compare the Avet MXJ Raptor.

Proven Single-Speed Power for Offshore Work

The Avet G2 MXL Single Speed Lever Drag Reels are built for anglers who want dependable offshore performance without the complexity of a multi-speed drivetrain. The MXL platform pairs a comfortable, compact profile with precision-machined 6061-T6 aircraft-grade aluminum, a lever drag system, stainless steel components, sealed bearings, and Avet's enhanced G2 design.

Choose the straightforward single-speed setup when you want to focus on the fight rather than shifting gears. The current lineup includes MC and no-MC configurations, glide-plate options, right-hand models, and a left-hand Silver model. Every reel is manufactured in the USA.

When Simplicity Is the Advantage

Two-speed reels are incredibly versatile, but not every angler needs another control to manage during a hard fight. The G2 MXL Single Speed keeps the setup focused: set your lever drag, choose your retrieve, and rely on a proven gear train while you stay connected to the fish. It is a strong fit for offshore anglers targeting tuna, marlin, wahoo, dorado, grouper, amberjack, and other powerful gamefish.

MC or No-MC, Glide Plate or No Glide Plate

The available configurations let you match the reel to how you fish. MC models add magnetic cast-control adjustment for spool management, while no-MC models keep the casting system simpler. Glide-plate models add a useful visual and tactile reference around the lever, while the no-glide-plate option keeps the configuration more minimal.

The Right Pick If...

• You prefer the reliability and straightforward operation of a single-speed reel.
• You fish offshore for tuna, marlin, wahoo, dorado, grouper, or amberjack.
• You want a machined aluminum lever drag reel built for serious saltwater use.
• You want to choose between MC and no-MC spool-control configurations.
• You need a right-hand model or the listed left-hand Silver configuration.

Where It Fits in the Avet Lineup

The G2 MXL Single Speed is the simplicity-first option in this group. If you want two-speed flexibility and up to 31 lb of listed full drag, compare the Avet MXL Raptor. For a narrow-spool 2-speed platform, see the Avet MXJ Raptor. If you want the larger MXL 6/3 Raptor Plus MC platform, compare the Avet MXL 6/3 Raptor Plus MC.

Best Techniques and Conditions

• Live bait: A single-speed retrieve keeps the presentation and the fight simple when you are working live bait offshore.
• Trolling: The lever drag and machined aluminum construction suit anglers who want a dependable conventional reel for sustained pressure.
• Offshore jigging: MC configurations give you a way to tune spool control for casting and lure work, while the single-speed design keeps operation direct.
• Big-game setups: Choose this platform when reliability and a focused control layout matter more to you than shifting between high and low gear.

Because the available models use different MC, glide-plate, and retrieve configurations, review the model table before choosing your reel.

Key Features

• G2 single-speed design: Straightforward operation with no gear shifting during the fight.
• Lever drag control: Make quick, accurate pressure adjustments and return to your preset.
• Precision-machined 6061-T6 aluminum: Solid construction for offshore use.
• Stainless steel gears and hardware: Built to withstand saltwater environments.
• Sealed bearings: Smooth rotation with added protection from the elements.
• MC options: Select models include magnetic cast control for spool management.
• Glide-plate options: Choose the configuration that matches your preferred lever setup.
• Retrieve choices: Right-hand models plus a listed left-hand Silver model.
• Corrosion-resistant anodized finish.
• Made in USA.

Models & Specs

Available models and SKUs

Tackle Express Tips

• Choose MC when you want magnetic spool adjustment for casting, and choose no-MC when you prefer the simplest configuration.
• Match the retrieve before ordering. The listed lineup includes right-hand models and a left-hand Silver model.
• Use the lever drag's preset as your reference point and make smooth changes during the fight rather than sudden jumps in pressure.

FAQ

Is the Avet G2 MXL a 2-speed reel?
No. The G2 MXL listing is a single-speed lever drag platform designed for anglers who prefer straightforward operation.

What is the difference between MC and no-MC?
MC models include magnetic cast-control adjustment for spool management. No-MC models omit that system for a simpler configuration.

How do I compare the G2 MXL with Avet Raptor reels?
Our Avet Reels Buyer’s Guide walks through reel sizes, retrieve options, gear setups, and applications. You can also compare the MXL Raptor 2-Speed when you want two-speed flexibility.

Complete the Setup

Protect the reel between trips with the Avet Reel Cover. For replacement or color-matched hardware, see the Avet Reel Clamp Kits. If your next trip calls for more drag and two-speed control, compare the Avet MXL 6/3 Raptor Plus MC.

Wide-Spool Two-Speed Control for Serious Offshore Fishing

The Avet HXW 2-Speed Lever Drag Reel gives offshore anglers a wide-spool platform, smooth lever-drag control, and the practical speed change needed when a fish moves from an open-water run to a heavy pull. The 5.4:1 high gear helps you recover line and work a lure, while the 2.4:1 low gear gives you more leverage when the fish sounds or turns deep.

Built from precision-machined 6061-T6 marine-grade aluminum with stainless steel components, the HXW 2-Speed is made for demanding saltwater use without adding unnecessary complexity. The listed HXW specification provides 100 lb braid capacity to 620 yards, up to 22 lb of drag at strike and 28 lb at full, and a 27 oz platform. This Silver model uses No-MC cast control, a glideplate, and is made in the USA.

A Wide Spool for Longer Runs

When a fish can take line before you get the angle back, spool capacity matters. The HXW 2-Speed gives you the wide-spool room for long-range and offshore applications, while the two gear ratios keep the reel useful both when you need quick recovery and when the fish forces you to slow down and crank.

High Gear to Recover, Low Gear to Work

• 5.4:1 high gear: Pick up line when a fish runs toward the boat and keep a presentation moving efficiently.
• 2.4:1 low gear: Add cranking leverage when a fish sounds or the fight becomes a steady pull.
• Lever drag with strike preset: Make quick, repeatable pressure changes during the fight.
• Dry carbon fiber drag: Smooth pressure, stopping power, and wear resistance for saltwater work.

The Right Pick If...

• You fish the 30–60 lb line class and want a wide-spool platform.
• You target tuna, yellowtail, white seabass, and other hard-pulling offshore fish.
• You want 100 lb braid capacity to 620 yards in the listed HXW specification.
• You prefer a straightforward No-MC setup with a Silver glideplate.
• You want a relatively light 27 oz reel with two-speed control.

Best Techniques and Conditions

• Offshore live bait: Use high gear to stay connected during a run, then shift to low when the fish settles into a deeper pull.
• Deep-water jigging: The wide spool gives you room for long drops, while low gear helps you work a heavy fish upward.
• Long-range saltwater fishing: Use the listed braid capacity when long runs and open-water distance are part of the plan.
• Heavy bait and trolling: High gear recovers line efficiently, and low gear gives you more control near the boat.

Where It Fits in the Avet Lineup

The HXW 2-Speed is the standard wide-spool option with a listed 22/28 lb drag range and 30–60 lb line class. For a stronger Raptor drag system with 40/50 lb listed drag and the same 100 lb/620-yard capacity, compare the Avet HXW Raptor 2-Speed Reel. For three-speed control, see the Avet HXW 3/S Raptor. For a narrower profile, compare the Avet HXJ Raptor 2-Speed Reel.

Key Features

• Two-speed gearing: 5.4:1 high and 2.4:1 low.
• Listed drag range: Up to 22 lb at strike and 28 lb at full.
• Wide spool: 100 lb braid capacity to 620 yards in the listed HXW specification.
• 30–60 lb line class: A practical match for serious offshore tackle.
• Dry carbon fiber drag: Smooth operation, stopping power, and wear resistance.
• True one-piece 6061-T6 marine-grade aluminum frame: Strong construction with a favorable strength-to-weight balance.
• 8 stainless steel ball bearings: Smooth reel operation.
• Precision-machined stainless steel gears: Built for saltwater use.
• No-MC cast control: Direct, non-magnetic configuration.
• Included hardware: Adjustable strike preset, alarm clicker, offset handle arm, soft-touch knob, and matching machined aluminum rod clamp.
• Made in USA.

Models & Specs

Available model and SKU

Tackle Express Tips

• Use high gear for line recovery and shift to low before the fish settles into a deep, heavy pull.
• Set the strike preset before the trip, then make pressure changes gradually as the fish changes direction.
• Fill the wide spool with a line system appropriate for the 30–60 lb class and the intended offshore application.

FAQ

How much drag does the standard HXW 2-Speed list?
The listed specification is up to 22 lb at strike and 28 lb at full.

How is this HXW different from the HXW Raptor?
This listing is the standard HXW 2-Speed with 8 stainless steel bearings and a 22/28 lb listed drag range. The HXW Raptor uses the Raptor drag package, lists 40/50 lb drag, and also lists 100 lb braid capacity to 620 yards.

Where can I compare Avet reel sizes and techniques?
Use the Avet Reels Buyer’s Guide for reel-size comparisons, retrieve options, and offshore applications.

Complete the Setup

Compare the Avet HXW Raptor for a higher listed drag range, then protect your reel between trips with the Avet Reel Cover. The Avet Reels Buyer’s Guide can help match the platform to your fishing plan.

The Accurate Valiant VT2 2-Speed Lever Drag Reel is the workhorse of Accurate's offshore lineup — a full-featured, USA-made conventional reel designed for anglers who need serious drag power, two-speed versatility, and a lightweight frame that won't wear them down over a long day on the water. From yellowtail and tuna to wahoo and large offshore pelagics, the VT2 is built to handle whatever you put it up against.

When One Speed Isn't Enough

On a single-speed reel, you're locked into one retrieve rate regardless of the situation. When a fish reverses direction or surges toward the boat, you either crank faster or lose ground. The VT2's DirecShift® two-speed system lets you drop from high gear into low gear instantly — without taking the reel out of strike drag, without losing your fighting position. When a big tuna decides to go deep, low gear is the difference between gaining line and watching the spool empty.

Built on the Valiant 2 Platform

• TwinDrag® system — dual-sided drag pressure on the main gear for smooth, even stopping power under sustained load
• DirecShift® 2-speed technology — seamless high-to-low gear transition without losing drag engagement
• 6061 T-6 aircraft-grade aluminum with CVX® curved frame — lightweight, rigid, made in the USA
• Xtreme Cast Technology (XCT®) — minimizes backlash for a lever drag reel that can actually cast
• 17-4 stainless steel gears with reinforced shaft — high torque under heavy drag pressure
• 8 Class 5 ABEC stainless steel bearings — fluid operation across the full retrieve range
• Drag cam detent — prevents accidental shift to free spool; push-button stop for full-drag engagement
• Clicker — alerts you to line movement on a soak
• Power arm handle — increased leverage for grinding on big fish
• Made in the USA

The Right Pick If...

• You're targeting large tuna, wahoo, or sharks where you need to crank against 30+ lbs of drag for extended periods
• You want a two-speed reel that can also cast — XCT® makes the VT2 more castable than most lever drag reels
• You're upgrading from a single-speed setup and want DirecShift® instant gear switching without fumbling mid-fight
• You need a USA-made reel that holds its value and can be serviced long-term

Best Fishing Techniques

• Live bait (large baits for tuna, wahoo, marlin)
• Chunking and kite fishing
• Vertical jigging and speed jigging
• Trolling (flat lines and downriggers)

Best Conditions

• Offshore bluewater and deep-water structure
• High-drag, heavy-tackle situations
• Situations where fish change direction or depth rapidly
• Extended fights requiring sustained cranking power

Best For

• Bluefin, yellowfin, and bigeye tuna
• Wahoo and mahi-mahi
• Yellowtail on heavy tackle
• Sharks, billfish, and large offshore pelagics

Key Features

• TwinDrag® — dual-sided main gear drag system
• DirecShift® — instant 2-speed switching under load
• CVX® aluminum frame — USA-made, lightweight, rigid
• XCT® — castable lever drag design
• 17-4 SS gears with reinforced shaft
• 8 Class 5 ABEC bearings
• Power arm handle
• Clicker and drag safety detent

Models & Specs

Note: Detailed specs for the VT2 S series should be verified at Accurate.com or via your Accurate rep. The previous spec table on this listing referenced BV2 model numbers which do not match these variants.

Tackle Express Tips

• The "S" suffix on VT2 models denotes silver finish — confirm color preference before ordering if your customer has a specific aesthetic in mind for a matched rod-and-reel setup.
• On the initial drop for live bait, use high gear so you can adjust tension quickly. Once a fish is hooked and burning deep, shift to low gear to maintain consistent pressure without fatiguing your wrist.
• Pair the VT2 500S with a 50–80 lb class stand-up rod for bluefin tuna on the rail. The lightweight CVX® frame makes a meaningful difference over a multi-hour drift session.

FAQ

What does DirecShift® mean on the VT2?
DirecShift® is Accurate's 2-speed shifting system that allows you to switch between high and low gear ratios instantly while the reel is engaged — no need to back off drag or stop reeling. It's designed specifically for fighting large, unpredictable fish that change depth or direction mid-fight.

What's the difference between the 600NS and 600N on other Valiant models?
The "N" denotes narrow spool for reduced line capacity and a more compact profile. The "S" suffix indicates silver finish. The 600NS is the narrow, silver-finish variant of the VT2 600 — ideal when you want a lighter, better-balanced setup and don't need maximum line capacity.

Is the Accurate Valiant VT2 made in the USA?
Yes. Accurate manufactures their reels domestically in the USA. The VT2 series is part of that same production line, which is a key differentiator from similarly-priced offshore reels made overseas.